D6.6 Final report on the METIS 5G system concept and technology roadmap

This deliverable presents the METIS 5G system concept which was developed to fulfil the requirements of the beyond-2020 connected information society and to extend today’s wireless communication systems to include new usage scenarios. The METIS 5G system concept consists of three generic 5G services and four main enablers. The three generic 5G services are Extreme Mobile BroadBand (xMBB), Massive Machine- Type Communications (mMTC), and Ultra-reliable Machine-Type Communication (uMTC). The four main enablers are Lean System Control Plane (LSCP), Dynamic RAN, Localized Contents and Traffic Flows, and Spectrum Toolbox. An overview of the METIS 5G architecture is given, as well as spectrum requirements and considerations. System-level evaluation of the METIS 5G system concept has been conducted, and we conclude that the METIS technical objectives are met. A technology roadmap outlining further 5G development, including a timeline and recommended future work is given.Popovski, P.; Mange, G.; Gozalvez -Serrano, D.; Rosowski, T.; Zimmermann, G.; Agyapong, P.; Fallgren, M.... (2014). D6.6 Final report on the METIS 5G system concept and technology roadmap. http://hdl.handle.net/10251/7676

Random Pilot and Data Access in Massive MIMO for Machine-type Communications

A massive MIMO system, represented by a base station with hundreds of antennas, is capable of spatially multiplexing many devices and thus naturally suited to serve dense crowds of wireless devices in emerging applications, such as machine-type communications. Crowd scenarios pose new challenges in the pilot-based acquisition of channel state information and call for pilot access protocols that match the intermittent pattern of device activity. A joint pilot assignment and data transmission protocol based on random access is proposed in this paper for the uplink of a massive MIMO system. The protocol relies on the averaging across multiple transmission slots of the pilot collision events that result from the random access process. We derive new uplink sum rate expressions that take pilot collisions, intermittent device activity, and interference into account. Simplified bounds are obtained and used to optimize the device activation probability and pilot length. A performance analysis indicates how performance scales as a function of the number of antennas and the transmission slot duration

D4.1 Draft air interface harmonization and user plane design

The METIS-II project envisions the design of a new air interface in order to fulfil all the performance requirements of the envisioned 5G use cases including some extreme low latency use cases and ultra-reliable transmission, xMBB requiring additional capacity that is only available in very high frequencies, as well as mMTC with extremely densely distributed sensors and very long battery life requirements. Designing an adaptable and flexible 5G Air Interface (AI), which will tackle these use cases while offering native multi-service support, is one of the key tasks of METIS-II WP4. This deliverable will highlight the challenges of designing an AI required to operate in a wide range of spectrum bands and cell sizes, capable of addressing the diverse services with often diverging requirements, and propose a design and suitability assessment framework for 5G AI candidates.Aydin, O.; Gebert, J.; Belschner, J.; Bazzi, J.; Weitkemper, P.; Kilinc, C.; Leonardo Da Silva, I.... (2016). D4.1 Draft air interface harmonization and user plane design. https://doi.org/10.13140/RG.2.2.24542.0288

Efficient implementation of channel estimation algorithm for beamforming

Abstract. The future 5G mobile network technology is expected to offer significantly better performance than its predecessors. Improved data rates in conjunction with low latency is believed to enable technological revolutions such as self-driving cars. To achieve faster data rates, MIMO systems can be utilized. These systems enable the use of spatial filtering technique known as beamforming. Beamforming that is based on the preacquired channel matrix is computationally very demanding causing challenges in achieving low latency. By acquiring the channel matrix as efficiently as possible, we can facilitate this challenge. In this thesis we examined the implementation of channel estimation algorithm for beamforming with a digital signal processor specialized in vector computation. We present implementations for different antenna configurations based on three different approaches. The results show that the best performance is achieved by applying the algorithm according to the limitations given by the system and the processor architecture. Although the exploitation of the parallel architecture was proved to be challenging, the implementation of the algorithm would have benefitted from the greater amount of parallelism. The current parallel resources will be a challenge especially in the future as the size of antenna configurations is expected to grow.Keilanmuodostuksen tarvitseman kanavaestimointialgoritmin tehokas toteutus. Tiivistelmä. Tulevan viidennen sukupolven mobiiliverkkoteknologian odotetaan tarjoavan merkittävästi edeltäjäänsä parempaa suorituskykyä. Tämän suorituskyvyn tarjoamat suuret datanopeudet yhdistettynä pieneen latenssiin uskotaan mahdollistavan esimerkiksi itsestään ajavat autot. Suurempien datanopeuksien saavuttamiseksi voidaan hyödyntää monitiekanavassa käytettävää MIMO-systeemiä, joka mahdollistaa keilanmuodostuksena tunnetun spatiaalisen suodatusmenetelmän käytön. Etukäteen hankittuun kanavatilatietoon perustuva keilanmuodostus on laskennallisesti erittäin kallista. Tämä aiheuttaa haasteita verkon pienen latenssivaatimuksen saavuttamisessa. Tässä työssä tutkittiin keilanmuodostukselle tarkoitetun kanavaestimointialgoritmin tehokasta toteutusta hyödyntäen vektorilaskentaan erikoistunutta prosessoriarkkitehtuuria. Työssä esitellään kolmea eri lähestymistapaa hyödyntävät toteutukset eri kokoisille antennikonfiguraatioille. Tuloksista nähdään, että paras suorituskyky saavutetaan sovittamalla algoritmi järjestelmän ja arkkitehtuurin asettamien rajoitusten mukaisesti. Vaikka rinnakkaisarkkitehtuurin hyödyntäminen asetti omat haasteensa, olisi algoritmin toteutus hyötynyt suuremmasta rinnakkaisuuden määrästä. Nykyinen rinnakkaisuuden määrä tulee olemaan haaste erityisesti tulevaisuudessa, sillä antennikonfiguraatioiden koon odotetaan kasvavan

Keilaavan millimetriaaltoradiolinkin suuntaaminen ja seuraaminen

In order to provide high-throughput mobile broadband in a dense urban information society, upcoming cellular networks will finally employ the under-utilized millimeter-wave (mmW) frequencies. The challenging mmW radio environment, however, necessitates massive cell densification with wireless backhauling using very directional links. This thesis investigates how these links between access points may be aligned efficiently, and how alignment reflects the network organization. The work provides a thorough presentation of different high-level aspects and background information required when designing a mmW small cell system. In terms of alignment functionality, both automatic link establishment and proactive tracking are considered. Additionally, the presentation includes an overview of beam steerable antennas, mmW propagation in urban environments, and network organization. The thesis further specifies requirements, proposes possible approaches and compares those with existing implementations. Most of existing mmW beam alignment solutions are intended for short-range indoor communications and do not address the issues in cellular systems. While existing functionality considers only a single link between two devices, efficient design should consider both the entire network and the underlying phenomena. The devices should further exploit the existing network infrastructure, location and orientation information, and the concepts of machine learning. Even though the world has recently seen advancements in the related fields, there is still much work to be done before commercial deployment is possible.Seuraavan sukupolven matkaviestinjärjestelmien erittäin nopeissa datayhteyksissä tullaan hyödyntämään millimetriaaltoteknologiaa. Näillä taajuuksilla radioympäristö on kuitenkin hyvin haastava, mikä edellyttää verkon solutiheyden moninkertaistamista, täysin langattomia tukiasemia ja erittäin suuntaavia antenneja. Tässä diplomityössä tutkitaan eri keinoja kuinka tukiasemien väliset linkit kohdistetaan tehokkaasti, ja miten se vaikuttaa verkon rakenteeseen ja hallintaan. Työ tarjoaa kattavan taustaselvityksen mm-aaltosoluverkon toteuttamiseen tarvittavista asioista. Keilanohjausta tarkastellaan sekä verkon automaattisen laajentamisen että kohteen aktiivisen seurauksen kannalta. Tämän lisäksi työssä tutkitaan keilattavia antenneja, mm-aaltojen etenemistä kaupunkiympäristöissä ja verkkorakennetta. Näiden lisäksi työssä rajataan edellytykset, esitetään mahdollisia ratkaisuja, ja vertaillaan näitä olemassa oleviin toteutuksiin. Nykyiset keilaustoteutukset ovat pääasiassa suunniteltu lyhyen kantaman sisäyhteyksille, eivätkä siten vastaa ongelman asettelua. Aikaisempi toiminnallisuus keskittyy yhteen ainoaan linkkiin vaikka tehokas toteutus huomioisi koko järjestelmän kohdistusongelman fysikaalista perustaa unohtamatta. Verkkolaitteiden tulisi hyödyntää olemassa olevaa radioverkkoa, sekä paikka- että suuntatietoja, ja koneoppimisen keinoja. Vaikka aiheeseen liittyvä teknologia on kehittynyt viime vuosina harppauksin, mm-aaltosoluverkot ovat kaikkea muuta kuin valmiita markkinoille

D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies

This document provides the most recent updates on the technical contributions and research challenges focused in WP3. Each Technology Component (TeC) has been evaluated under possible uniform assessment framework of WP3 which is based on the simulation guidelines of WP6. The performance assessment is supported by the simulation results which are in their mature and stable state. An update on the Most Promising Technology Approaches (MPTAs) and their associated TeCs is the main focus of this document. Based on the input of all the TeCs in WP3, a consolidated view of WP3 on the role of multinode/multi-antenna transmission technologies in 5G systems has also been provided. This consolidated view is further supported in this document by the presentation of the impact of MPTAs on METIS scenarios and the addressed METIS goals.Aziz, D.; Baracca, P.; De Carvalho, E.; Fantini, R.; Rajatheva, N.; Popovski, P.; Sørensen, JH.... (2015). D 3. 3 Final performance results and consolidated view on the most promising multi -node/multi -antenna transmission technologies. http://hdl.handle.net/10251/7675

Study, Measurements and Characterisation of a 5G system using a Mobile Network Operator Testbed

The goals for 5G are aggressive. It promises to deliver enhanced end-user experience by offering new applications and services through gigabit speeds, and significantly improved performance and reliability. The enhanced mobile broadband (eMBB) 5G use case, for instance, targets peak data rates as high as 20 Gbps in the downlink (DL) and 10 Gbps in the uplink (UL). While there are different ways to improve data rates, spectrum is at the core of enabling higher mobile broadband data rates. 5G New Radio (NR) specifies new frequency bands below 6 GHz and also extends into mmWave frequencies where more contiguous bandwidth is available for sending lots of data. However, at mmWave frequencies, signals are more susceptible to impairments. Hence, extra consideration is needed to determine test approaches that provide the precision required to accurately evaluate 5G components and devices. Therefore, the aim of the thesis is to provide a deep dive into 5G technology, explore its testing and validation, and thereafter present the OTE (Hellenic Telecommunications Organisation) 5G testbed, including measurement results obtained and its characterisation based on key performance indicators (KPIs)

5G 이후 무선 네트워크를 위한 무선 접속 기술 향상 연구

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 전기·정보공학부, 2020. 8. 박세웅.Recently, operators are creating services using 5G systems in various fields, e.g., manufacturing, automotive, health care, etc. 5G use cases include transmission of small packets using IoT devices to high data rate transmission such as high-definition video streaming. When a large-scale IoT device transmits a small packet, power saving is important, so it is necessary to disconnect from the base station and then establish a connection through random access to transmit data. However, existing random access procedures are difficult to satisfy various latency requirements. It is attractive to use a wide bandwidth of the millimeter wave spectrum for high data rate transmission. In order to overcome the channel characteristics, beamforming technology is applied. However, when determining a beam pair between a transmitter and a receiver, interference is not considered. In this dissertation, we consider the following three enhancements to enable 5G and beyond use cases: (i) Two-step random access procedure for delay-sensitive devices, (ii) self-uplink synchronization framework for solving preamble collision problem, and (iii) interference-aware beam adjustment for interference coordination. First, RAPID, two-step random access for delay-sensitive devices, is proposed to reduce latency requirement value for satisfying specific reliability. When devices, performing RAPID and contention-based random access, coexist, it is important to determine a value that is the number of preambles for RAPID to reduce random access load. Simulation results show that RAPID achieves 99.999% reliability with 80.8% shorter uplink latency, and also decreases random access load by 30.5% compared with state-of-the-art techniques. Second, in order to solve preamble collision problem, we develop self-uplink synchronization framework called EsTA. Preamble collision occurs when multiple devices transmit the same preamble. Specifically, we propose a framework that helps the UE to estimate the timing advance command using a deep neural network model and to determine the TA value. Estimation accuracy can achieve 98–99% when subcarrier spacing is 30 and 60 kHz. Finally, we propose IBA, which is interference-aware beam adjustment method to reduce interference in millimeter wave networks. Unlike existing methods of reducing interference by scheduling time and frequency resources differently, interference is controlled through beam adjustment. In IBA, it is important to reduce search space of finding new beam pair to reduce interference. In practical, it is impossible to search beam pair of all combinations. Therefore, through Monte Carlo method, we can reduce search space to achieve local optimum. IBA achieve enhancement of lower 50%throughput up to 50% compared with only applying beam adjustment. In summary, we propose a two-step random access, a self-uplink synchronization framework, and interference-aware beam adjustment for 5G and beyond use cases. Through these researches, we achieve enhancements of network performance such as latency and throughput compared with state-of-the-art techniques.최근 사업자는 제조, 자동차, 헬스 케어 등 다양한 분야에서 5G 시스템을 사용하여 서비스를 만들고 있다. 5G 사용 사례에는 IoT 장치를 이용한 작은 패킷 전송에서고화질 비디오 스트리밍과 같은 고속 데이터 전송까지 포함된다. 대규모 IoT 장치가작은 패킷을 전송하는 경우 전력 소모 절약이 중요하므로 기지국과의 연결을 끊은다음 랜덤 액세스를 통해 다시 기지국과 연결하여 데이터를 전송해야한다. 그러나기존의 랜덤 액세스 절차는 다양한 지연시간 요건을 만족시키기 어렵다. 한편, 높은데이터 전송 속도를 위해 넓은 대역폭의 밀리미터파 대역을 사용한다. 이때, 밀리미터파 대역 채널 특성을 극복하기 위해 빔포밍 기술이 적용된다. 그러나 현재 5G표준에서 송신기와 수신기 사이의 빔 쌍을 결정할 때, 간섭은 고려되지 않는다. 이논문에서는 5G 및 그 이후의 네트워크에서 다양한 사용 사례를 지원하기 위해 다음세 가지 개선 사항을 고려한다. (i) 지연에 민감한 장치를 위한 2 단계 랜덤 액세스절차, (ii) 프리앰블 충돌 문제를 해결하기 위한 자체 상향링크 동기화 프레임 워크,그리고 (iii) 간섭을 줄이기 위한 간섭 인식 빔 조정이다. 첫째, 지연에 민감한 장치를 위한 2 단계 랜덤 액세스인 RAPID는 특정 신뢰도를 만족시키기 위한 지연시간을 줄이기 위해 제안되었다. RAPID와 경합 기반 랜덤 액세스를 수행하는 장치가 공존할 경우 RAPID가 랜덤 액세스 부하를 줄이기 위해 RAPID를 위해 할당되는 프리앰블 수를 결정하는 것이 중요하다. 시뮬레이션 결과에 따르면 RAPID는 99.999%의신뢰도를 만족시키는 지연시간을 최신 기술에 비해 80.8% 줄이면서, 랜덤 액세스부하를 30.5% 줄인다. 둘째, 프리앰블 충돌 문제를 해결하기 위해 자체 상향링크 동기화 프레임워크인 EsTA를 개발한다. 프리앰블 충돌은 여러 장치가 동일한 프리앰블을 전송할 때 발생한다. 구체적으로, 단말이 심층 신경망 모델을 사용하여 timing advance(TA) command를 추정하고 TA값을 결정하는 프레임 워크를 제안한다. 네트워크 시스템의 부반송파 간격이 30 및 60 kHz 일 때, TA command 추정 정확도는98–99%를 달성 할 수 있다. 마지막으로, 밀리미터파 네트워크에서 간섭을 줄이기 위한 간섭 인식 빔 조정 방법인 IBA를 제안한다. 시간과 주파수 자원을 다르게 예약하여 간섭을 줄이는 기존의 방법과 달리 IBA는 빔 조정을 통해 간섭을 제어한다.이 때, 간섭을 줄이기 위해 새로운 빔 쌍을 찾는 검색 공간을 줄이는 것이 중요하다.현실적으로 모든 빔 쌍의 조합을 검색하는 것은 불가능하다. 따라서 IBA는 Monte Carlo 방법을 통해 검색 공간을 축소하여 local optimum을 달성하도록 설계되어야한다. IBA는 5G 표준의 빔 조정 방법과 비교했을 때, 하위 50% throughput의 중간값이최대 50%까지 향상된다. 요약하면, 우리는 5G 및 그 이후의 다양한 사용 사례를 위해서 2 단계 랜덤 액세스, 자체 상향링크 동기화 프레임 워크, 그리고 간섭 인식 빔조정 방법을 제안한다. 이 연구를 통해 최신 기술에 비해 지연시간 및 처리량과 같은네트워크 성능이 향상된다.1 Introduction 1 1.1 5G Vision, Applications, and Keywords 1 1.2 Overview of Existing Approach 3 1.3 Main Contributions 4 1.3.1 RAPID: Two-Step Random Access 4 1.3.2 EsTA: Self-Uplink Synchronization 5 1.3.3 IBA: Interference-Aware Beam Adjustment 5 1.4 Organization of the Dissertation 6 2 RAPID: Contention Resolution-based Random Access Procedure using Context ID for IoT 7 2.1 Introduction 7 2.2 Background 10 2.2.1 RRC State 10 2.2.2 Random Access Procedure 11 2.2.3 Uplink Latency in RRC INACTIVE State 13 2.2.4 Related Work 14 2.3 RAPID: Proposed Random Access Procedure 15 2.3.1 Overview 15 2.3.2 Criterion of Applying RAPID 16 2.3.3 Preamble Set and RACH Period Allocation 17 2.3.4 Preamble Transmission 18 2.3.5 RAR Transmission 19 2.3.6 AS Context ID Allocation 21 2.3.7 Number of Preambles for RAPID 22 2.4 Access Pattern Analyzer 22 2.4.1 Overview 22 2.4.2 APA Operation 23 2.4.3 Margin Value 26 2.4.4 Offset Index Decision 26 2.5 Random Access Load Analysis 27 2.5.1 System Model 28 2.5.2 Markov Chain Model for 4-Step RA 29 2.5.3 Average Random Access Load for 4-Step RA 34 2.5.4 Markov Chain Model for RAPID 34 2.5.5 Average Random Access Load for RAPID 37 2.5.6 Validation of Analysis 38 2.5.7 Optimization Problem 41 2.6 Performance Evaluation 42 2.6.1 Simulation Setup 42 2.6.2 Number of Preambles for RAPID 43 2.6.3 Performance of RAPID 43 2.6.4 Performance of APA 48 2.7 Summary 48 3 EsTA: Self-Uplink Synchronization in 2-Step Random Access 49 3.1 Introduction 49 3.2 Background 51 3.2.1 Overview of 2-Step CBRA 51 3.2.2 Channel Structure for msgA 52 3.2.3 TA Handling for the Payload 54 3.2.4 2-Step Random Access in Recent Literature 56 3.3 Challenges of 2-Step Random Access 57 3.3.1 Preamble Allocation 57 3.3.2 Resource Mapping for msgA 58 3.3.3 DFT Operation in gNB 58 3.3.4 Detected Collision Problem 58 3.4 EsTA: Proposed Self-UL Synchronization Procedure 59 3.4.1 Overview 60 3.4.2 Overall Procedures 60 3.4.3 Performance Evaluation 61 3.4.4 Future Research Perspectives 65 3.5 Summary 65 4 IBA: Interference-Aware Beam Adjustment for 5G mmWave Networks 67 4.1 Introduction 67 4.2 Background 68 4.2.1 Beam Management in 5G NR 68 4.2.2 System-Level Simulation and 3D Beamforming for 5G NR 70 4.3 Motivation 70 4.3.1 Throughput Degradation by Interference 70 4.4 IBA: Proposed Interference Management Scheme 72 4.4.1 Overall Procedure 72 4.4.2 Reduction of Search Space 72 4.4.3 Algorithm for IBA 75 4.5 Performance Evaluation 76 4.6 Summary 78 5 Concluding Remarks 79 5.1 Research Contributions 79 5.2 Future Work 80 Abstract (In Korean) 89 감사의 글 92Docto

6G Enabled Smart Infrastructure for Sustainable Society: Opportunities, Challenges, and Research Roadmap

The 5G wireless communication network is currently faced with the challenge of limited data speed exacerbated by the proliferation of billions of data-intensive applications. To address this problem, researchers are developing cutting-edge technologies for the envisioned 6G wireless communication standards to satisfy the escalating wireless services demands. Though some of the candidate technologies in the 5G standards will apply to 6G wireless networks, key disruptive technologies that will guarantee the desired quality of physical experience to achieve ubiquitous wireless connectivity are expected in 6G. This article first provides a foundational background on the evolution of different wireless communication standards to have a proper insight into the vision and requirements of 6G. Second, we provide a panoramic view of the enabling technologies proposed to facilitate 6G and introduce emerging 6G applications such as multi-sensory–extended reality, digital replica, and more. Next, the technology-driven challenges, social, psychological, health and commercialization issues posed to actualizing 6G, and the probable solutions to tackle these challenges are discussed extensively. Additionally, we present new use cases of the 6G technology in agriculture, education, media and entertainment, logistics and transportation, and tourism. Furthermore, we discuss the multi-faceted communication capabilities of 6G that will contribute significantly to global sustainability and how 6G will bring about a dramatic change in the business arena. Finally, we highlight the research trends, open research issues, and key take-away lessons for future research exploration in 6G wireless communicatio