Real-time geophysical applications with Android GNSS raw measurements

The number of Android devices enabling access to raw GNSS (Global Navigation Satellite System) measurements is rapidly increasing, thanks to the dedicated Google APIs. In this study, the Xiaomi Mi8, the first GNSS dual-frequency smartphone embedded with the Broadcom BCM47755 GNSS chipset, was employed by leveraging the features of L5/E5a observations in addition to the traditional L1/E1 observations. The aim of this paper is to present two different smartphone applications in Geoscience, both based on the variometric approach and able to work in real time. In particular, tests using both VADASE (Variometric Approach for Displacement Analysis Stand-alone Engine) to retrieve the 3D velocity of a stand-alone receiver in real-time, and VARION (Variometric Approach for Real-Time Ionosphere Observations) algorithms, able to reconstruct real-time sTEC (slant total electron content) variations, were carried out. The results demonstrate the contribution that mass-market devices can offer to the geosciences. In detail, the noise level obtained with VADASE in a static scenario-few mm/s for the horizontal components and around 1 cm/s for the vertical component-underlines the possibility, confirmed from kinematic tests, of detecting fast movements such as periodic oscillations caused by earthquakes. VARION results indicate that the noise level can be brought back to that of geodetic receivers, making the Xiaomi Mi8 suitable for real-time ionosphere monitoring

Precise Point Positioning Augmentation for Various Grades of Global Navigation Satellite System Hardware

The next generation of low-cost, dual-frequency, multi-constellation GNSS receivers, boards, chips and antennas are now quickly entering the market, offering to disrupt portions of the precise GNSS positioning industry with much lower cost hardware and promising to provide precise positioning to a wide range of consumers. The presented work provides a timely, novel and thorough investigation into the positioning performance promise. A systematic and rigorous set of experiments has been carried-out, collecting measurements from a wide array of low-cost, dual-frequency, multi-constellation GNSS boards, chips and antennas introduced in late 2018 and early 2019. These sensors range from dual-frequency, multi-constellation chips in smartphones to stand-alone chips and boards. In order to be comprehensive and realistic, these experiments were conducted in a number of static and kinematic benign, typical, suburban and urban environments. In terms of processing raw measurements from these sensors, the Precise Point Positioning (PPP) GNSS measurement processing mode was used. PPP has become the defacto GNSS positioning and navigation technique for scientific and engineering applications that require dm- to cm-level positioning in remote areas with few obstructions and provides for very efficient worldwide, wide-array augmentation corrections. To enhance solution accuracy, novel contributions were made through atmospheric constraints and the use of dual- and triple-frequency measurements to significantly reduce PPP convergence period. Applying PPP correction augmentations to smartphones and recently released low-cost equipment, novel analyses were made with significantly improved solution accuracy. Significant customization to the York-PPP GNSS measurement processing engine was necessary, especially in the quality control and residual analysis functions, in order to successfully process these datasets. Results for new smartphone sensors show positioning performance is typically at the few dm-level with a convergence period of approximately 40 minutes, which is 1 to 2 orders of magnitude better than standard point positioning. The GNSS chips and boards combined with higher-quality antennas produce positioning performance approaching geodetic quality. Under ideal conditions, carrier-phase ambiguities are resolvable. The results presented show a novel perspective and are very promising for the use of PPP (as well as RTK) in next-generation GNSS sensors for various application in smartphones, autonomous vehicles, Internet of things (IoT), etc

An analysis of multi-GNSS observations tracked by recent Android smartphones and smartphone-only relative positioning results

In this study we assess the quality of multi-GNSS observations of recent Android smartphones. The results reveal a significant drop of smartphone carrier-to-noise density ratio (C/N0) with respect to geodetic receivers, and discernible differences among constellations and frequency bands. We show that the higher the elevation of the satellite, the larger discrepancy in C/N0 between the geodetic receivers and smartphones. Thus we show that a C/N0 weighting scheme may be superior to the elevation dependent one usually adopted for GNSS observations. We also discover that smartphone code pseudoranges are noisier by about one order of magnitude as compared to geodetic receivers, and that the code signals on L5 and E5a outperform those on L1 and E1, respectively. It is shown that smartphone phase observations are contaminated by the effects that can destroy the integer property and time-constancy of the ambiguities. There are long term drifts detected for GPS L5, Galileo E1, E5a and BDS B1 phase observations of Huawei P30. We highlight competitive phase noise characteristics for the Xiaomi Mi 8 when compared to the geodetic receivers. We also reveal a poor quality of other than GPS L1 phase signals for the Huawei P30 smartphones related to the unexpected drifts of the observations. Finally, the positioning experiment proves that it is feasible to obtain a precise cm-level solution of a smartphone to smartphone relative positioning with fixed integer ambiguities

High-Frequency Sea Level Variations Observed by GPS Buoys Using Precise Point Positioning Technique

In this study, sea level variation observed by a 1-Hz Global Positioning System (GPS) buoy system is verified by comparing with tide gauge records and is decomposed to reveal high-frequency signals that cannot be detected from 6-minute tide gauge records. Compared to tide gauges traditionally used to monitor sea level changes and affected by land motion, GPS buoys provide high-frequency geocentric measurements of sea level variations. Data from five GPS buoy campaigns near a tide gauge at Anping, Tainan, Taiwan, were processed using the Precise Point Positioning (PPP) technique with four different satellite orbit products from the International GNSS Service (IGS). The GPS buoy data were also processed by a differential GPS (DGPS) method that needs an additional GPS receiver as a reference station and the accuracy of the solution depends on the baseline length. The computation shows the average Root Mean Square Error (RMSE) difference of the GPS buoy using DGPS and tide gauge records is around 3 - 5 cm. When using the aforementioned IGS orbit products for the buoy derived by PPP, its average RMSE differences are 5 - 8 cm, 8 - 13 cm, decimeter level, and decimeter-meter level, respectively, so the accuracy of the solution derived by PPP highly depends on the accuracy of IGS orbit products. Therefore, the result indicates that the accuracy of a GPS buoy using PPP has the potential to measure the sea surface variations to several cm. Finally, high-frequency sea level signals with periods of a few seconds to a day can be successfully detected in GPS buoy observations using the Ensemble Empirical Mode Decomposition (EMD) method and are identified as waves, meteotsunamis, and tides