Tuning the Level of Concurrency in Software Transactional Memory: An Overview of Recent Analytical, Machine Learning and Mixed Approaches

Synchronization transparency offered by Software Transactional Memory (STM) must not come at the expense of run-time efficiency, thus demanding from the STM-designer the inclusion of mechanisms properly oriented to performance and other quality indexes. Particularly, one core issue to cope with in STM is related to exploiting parallelism while also avoiding thrashing phenomena due to excessive transaction rollbacks, caused by excessively high levels of contention on logical resources, namely concurrently accessed data portions. A means to address run-time efficiency consists in dynamically determining the best-suited level of concurrency (number of threads) to be employed for running the application (or specific application phases) on top of the STM layer. For too low levels of concurrency, parallelism can be hampered. Conversely, over-dimensioning the concurrency level may give rise to the aforementioned thrashing phenomena caused by excessive data contention—an aspect which has reflections also on the side of reduced energy-efficiency. In this chapter we overview a set of recent techniques aimed at building “application-specific” performance models that can be exploited to dynamically tune the level of concurrency to the best-suited value. Although they share some base concepts while modeling the system performance vs the degree of concurrency, these techniques rely on disparate methods, such as machine learning or analytic methods (or combinations of the two), and achieve different tradeoffs in terms of the relation between the precision of the performance model and the latency for model instantiation. Implications of the different tradeoffs in real-life scenarios are also discussed

How to Incentivize Data-Driven Collaboration Among Competing Parties

The availability of vast amounts of data is changing how we can make medical discoveries, predict global market trends, save energy, and develop educational strategies. In some settings such as Genome Wide Association Studies or deep learning, sheer size of data seems critical. When data is held distributedly by many parties, they must share it to reap its full benefits. One obstacle to this revolution is the lack of willingness of different parties to share data, due to reasons such as loss of privacy or competitive edge. Cryptographic works address privacy aspects, but shed no light on individual parties' losses/gains when access to data carries tangible rewards. Even if it is clear that better overall conclusions can be drawn from collaboration, are individual collaborators better off by collaborating? Addressing this question is the topic of this paper. * We formalize a model of n-party collaboration for computing functions over private inputs in which participants receive their outputs in sequence, and the order depends on their private inputs. Each output "improves" on preceding outputs according to a score function. * We say a mechanism for collaboration achieves collaborative equilibrium if it ensures higher reward for all participants when collaborating (rather than working alone). We show that in general, computing a collaborative equilibrium is NP-complete, yet we design efficient algorithms to compute it in a range of natural model settings. Our collaboration mechanisms are in the standard model, and thus require a central trusted party; however, we show this assumption is unnecessary under standard cryptographic assumptions. We show how to implement the mechanisms in a decentralized way with new extensions of secure multiparty computation that impose order/timing constraints on output delivery to different players, as well as privacy and correctness

Packet Transactions: High-level Programming for Line-Rate Switches

Many algorithms for congestion control, scheduling, network measurement, active queue management, security, and load balancing require custom processing of packets as they traverse the data plane of a network switch. To run at line rate, these data-plane algorithms must be in hardware. With today's switch hardware, algorithms cannot be changed, nor new algorithms installed, after a switch has been built. This paper shows how to program data-plane algorithms in a high-level language and compile those programs into low-level microcode that can run on emerging programmable line-rate switching chipsets. The key challenge is that these algorithms create and modify algorithmic state. The key idea to achieve line-rate programmability for stateful algorithms is the notion of a packet transaction : a sequential code block that is atomic and isolated from other such code blocks. We have developed this idea in Domino, a C-like imperative language to express data-plane algorithms. We show with many examples that Domino provides a convenient and natural way to express sophisticated data-plane algorithms, and show that these algorithms can be run at line rate with modest estimated die-area overhead.Comment: 16 page

Design Automation and Application for Emerging Reconfigurable Nanotechnologies

In the last few decades, two major phenomena have revolutionized the electronic industry – the ever-increasing dependence on electronic circuits and the Complementary Metal Oxide Semiconductor (CMOS) downscaling. These two phenomena have been complementing each other in a way that while electronics, in general, have demanded more computations per functional unit, CMOS downscaling has aptly supported such needs. However, while the computational demand is still rising exponentially, CMOS downscaling is reaching its physical limits. Hence, the need to explore viable emerging nanotechnologies is more imperative than ever. This thesis focuses on streamlining the existing design automation techniques for a class of emerging reconfigurable nanotechnologies. Transistors based on this technology exhibit duality in conduction, i.e. they can be configured dynamically either as a p-type or an n-type device on the application of an external bias. Owing to this dynamic reconfiguration, these transistors are also referred to as Reconfigurable Field-Effect Transistors (RFETs). Exploring and developing new technologies just like CMOS, require tackling two main challenges – first, design automation flow has to be modified to enable tailor- made circuit designs. Second, possible application opportunities should be explored where such technologies can outsmart the existing CMOS technologies. This thesis targets the above two objectives for emerging reconfigurable nanotechnologies by proposing approaches for enabling an Electronic Design Automation (EDA) flow for circuits based on RFETs and exploring hardware security as an application that exploits the transistor-level dynamic reconfiguration offered by this technology. This thesis explains the bottom-up approach adopted to propose a logic synthesis flow by identifying new logic gates and circuit design paradigms that can particularly exploit the dynamic reconfiguration offered by these novel nanotechnologies. This led to the subsequent need of finding natural Boolean logic abstraction for emerging reconfigurable nanotechnologies as it is shown that the existing abstraction of negative unate logic for CMOS technologies is sub-optimal for RFETs-based circuits. In this direction, it has been shown that duality in Boolean logic is a natural abstraction for this technology and can truly represent the duality in conduction offered by individual transistors. Finding this abstraction paved the way for defining suitable primitives and proposing various algorithms for logic synthesis and technology mapping. The following step is to explore compatible physical synthesis flow for emerging reconfigurable nanotechnologies. Using silicon nanowire-based RFETs, .lef and .lib files have been provided which can provide an end-to-end flow to generate .GDSII file for circuits exclusively based on RFETs. Additionally, new approaches have been explored to improve placement and routing for circuits based on reconfigurable nanotechnologies. It has been demonstrated how these approaches led to superior results as compared to the native flow meant for CMOS. Lastly, the unique property of transistor-level reconfiguration offered by RFETs is utilized to implement efficient Intellectual Property (IP) protection schemes against adversarial attacks. The ability to control the conduction of individual transistors can be argued as one of the impactful features of this technology and suitably fits into the paradigm of security measures. Prior security schemes based on CMOS technology often come with large overheads in terms of area, power, and delay. In contrast, RFETs-based hardware security measures such as logic locking, split manufacturing, etc. proposed in this thesis, demonstrate affordable security solutions with low overheads. Overall, this thesis lays a strong foundation for the two main objectives – design automation, and hardware security as an application, to push emerging reconfigurable nanotechnologies for commercial integration. Additionally, contributions done in this thesis are made available under open-source licenses so as to foster new research directions and collaborations.:Abstract List of Figures List of Tables 1 Introduction 1.1 What are emerging reconfigurable nanotechnologies? 1.2 Why does this technology look so promising? 1.3 Electronics Design Automation 1.4 The game of see-saw: key challenges vs benefits for emerging reconfigurable nanotechnologies 1.4.1 Abstracting ambipolarity in logic gate designs 1.4.2 Enabling electronic design automation for RFETs 1.4.3 Enhanced functionality: a suitable fit for hardware security applications 1.5 Research questions 1.6 Entire RFET-centric EDA Flow 1.7 Key Contributions and Thesis Organization 2 Preliminaries 2.1 Reconfigurable Nanotechnology 2.1.1 1D devices 2.1.2 2D devices 2.1.3 Factors favoring circuit-flexibility 2.2 Feasibility aspects of RFET technology 2.3 Logic Synthesis Preliminaries 2.3.1 Circuit Model 2.3.2 Boolean Algebra 2.3.3 Monotone Function and the property of Unateness 2.3.4 Logic Representations 3 Exploring Circuit Design Topologies for RFETs 3.1 Contributions 3.2 Organization 3.3 Related Works 3.4 Exploring design topologies for combinational circuits: functionality-enhanced logic gates 3.4.1 List of Combinational Functionality-Enhanced Logic Gates based on RFETs 3.4.2 Estimation of gate delay using the logical effort theory 3.5 Invariable design of Inverters 3.6 Sequential Circuits 3.6.1 Dual edge-triggered TSPC-based D-flip flop 3.6.2 Exploiting RFET’s ambipolarity for metastability 3.7 Evaluations 3.7.1 Evaluation of combinational logic gates 3.7.2 Novel design of 1-bit ALU 3.7.3 Comparison of the sequential circuit with an equivalent CMOS-based design 3.8 Concluding remarks 4 Standard Cells and Technology Mapping 4.1 Contributions 4.2 Organization 4.3 Related Work 4.4 Standard cells based on RFETs 4.4.1 Interchangeable Pull-Up and Pull-Down Networks 4.4.2 Reconfigurable Truth-Table 4.5 Distilling standard cells 4.6 HOF-based Technology Mapping Flow for RFETs-based circuits 4.6.1 Area adjustments through inverter sharings 4.6.2 Technology Mapping Flow 4.6.3 Realizing Parameters For The Generic Library 4.6.4 Defining RFETs-based Genlib for HOF-based mapping 4.7 Experiments 4.7.1 Experiment 1: Distilling standard-cells from a benchmark suite 4.7.2 Experiment 2A: HOF-based mapping . 4.7.3 Experiment 2B: Using the distilled standard-cells during mapping 4.8 Concluding Remarks 5 Logic Synthesis with XOR-Majority Graphs 5.1 Contributions 5.2 Organization 5.3 Motivation 5.4 Background and Preliminaries 5.4.1 Terminologies 5.4.2 Self-duality in NPN classes 5.4.3 Majority logic synthesis 5.4.4 Earlier work on XMG 5.4.5 Classification of Boolean functions 5.5 Preserving Self-Duality 5.5.1 During logic synthesis 5.5.2 During versatile technology mapping 5.6 Advanced Logic synthesis techniques 5.6.1 XMG resubstitution 5.6.2 Exact XMG rewriting 5.7 Logic representation-agnostic Mapping 5.7.1 Versatile Mapper 5.7.2 Support of supergates 5.8 Creating Self-dual Benchmarks 5.9 Experiments 5.9.1 XMG-based Flow 5.9.2 Experimental Setup 5.9.3 Synthetic self-dual benchmarks 5.9.4 Cryptographic benchmark suite 5.10 Concluding remarks and future research directions 6 Physical synthesis flow and liberty generation 6.1 Contributions 6.2 Organization 6.3 Background and Related Work 6.3.1 Related Works 6.3.2 Motivation 6.4 Silicon Nanowire Reconfigurable Transistors 6.5 Layouts for Logic Gates 6.5.1 Layouts for Static Functional Logic Gates 6.5.2 Layout for Reconfigurable Logic Gate 6.6 Table Model for Silicon Nanowire RFETs 6.7 Exploring Approaches for Physical Synthesis 6.7.1 Using the Standard Place & Route Flow 6.7.2 Open-source Flow 6.7.3 Concept of Driver Cells 6.7.4 Native Approach 6.7.5 Island-based Approach 6.7.6 Utilization Factor 6.7.7 Placement of the Island on the Chip 6.8 Experiments 6.8.1 Preliminary comparison with CMOS technology 6.8.2 Evaluating different physical synthesis approaches 6.9 Results and discussions 6.9.1 Parameters Which Affect The Area 6.9.2 Use of Germanium Nanowires Channels 6.10 Concluding Remarks 7 Polymporphic Primitives for Hardware Security 7.1 Contributions 7.2 Organization 7.3 The Shift To Explore Emerging Technologies For Security 7.4 Background 7.4.1 IP protection schemes 7.4.2 Preliminaries 7.5 Security Promises 7.5.1 RFETs for logic locking (transistor-level locking) 7.5.2 RFETs for split manufacturing 7.6 Security Vulnerabilities 7.6.1 Realization of short-circuit and open-circuit scenarios in an RFET-based inverter 7.6.2 Circuit evaluation on sub-circuits 7.6.3 Reliability concerns: A consequence of short-circuit scenario 7.6.4 Implication of the proposed security vulnerability 7.7 Analytical Evaluation 7.7.1 Investigating the security promises 7.7.2 Investigating the security vulnerabilities 7.8 Concluding remarks and future research directions 8 Conclusion 8.1 Concluding Remarks 8.2 Directions for Future Work Appendices A Distilling standard-cells B RFETs-based Genlib C Layout Extraction File (.lef) for Silicon Nanowire-based RFET D Liberty (.lib) file for Silicon Nanowire-based RFET

Parallel network protocol stacks using replication

Computing applications demand good performance from networking systems. This includes high-bandwidth communication using protocols with sophisticated features such as ordering, reliability, and congestion control. Much of this protocol processing occurs in software, both on desktop systems and servers. Multi-processing is a requirement on today\u27s computer architectures because their design does not allow for increased processor frequencies. At the same time, network bandwidths continue to increase. In order to meet application demand for throughput, protocol processing must be parallel to leverage the full capabilities of multi-processor or multi-core systems. Existing parallelization strategies have performance difficulties that limit their scalability and their application to single, high-speed data streams. This dissertation introduces a new approach to parallelizing network protocol processing without the need for locks or for global state. Rather than maintain global states, each processor maintains its own copy of protocol state. Therefore, updates are local and don\u27t require fine-grained locks or explicit synchronization. State management work is replicated, but logically independent work is parallelized. Along with the approach, this dissertation describes Dominoes, a new framework for implementing replicated processing systems. Dominoes organizes the state information into Domains and the communication into Channels. These two abstractions provide a powerful, but flexible model for testing the replication approach. This dissertation uses Dominoes to build a replicated network protocol system. The performance of common protocols, such as TCP/IP, is increased by multiprocessing single connections. On commodity hardware, throughput increases between 15-300% depending on the type of communication. Most gains are possible when communicating with unmodified peer implementations, such as Linux. In addition to quantitative results, protocol behavior is studied as it relates to the replication approach