Reliable Routing in Vehicular Ad hoc Networks.

International audienceOne of the notoriously difficult problems in vehicular ad-hoc networks (VANET) is to ensure that established routing paths do not break before the end of data transmission. This is a difficult problem because the network topology is constantly changing and the wireless communication links are inherently unstable, due to high node mobility. In this paper we classify existing VANET routing protocols into five categories: connectivity-based, mobility-based, infrastructure-based, geographic-location-based, and probability-model-based, according to their employed routing metrics. For each category, we present the general design ideas and state of the art. Our objective is to attract more attention to the VANET routing problem and encourage more research efforts on developing reliable solutions

Previous hop routing: exploiting opportunism in VANETs

Routing in highly dynamic wireless networks such as Vehicular Ad-hoc Networks (VANETs) is a challenging task due to frequent topology changes. Sustaining a transmission path between peers in such network environment is difficult. In this thesis, Previous Hop Routing (PHR) is poposed; an opportunistic forwarding protocol exploiting previous hop information and distance to destination to make the forwarding decision on a packet-by-packet basis. It is intended for use in highly dynamic network where the life time of a hop-by-hop path between source and destination nodes is short. Exploiting the broadcast nature of wireless communication avoids the need to copy packets, and enables redundant paths to be formed. To save network resources, especially under high network loads, PHR employs probabilistic forwarding. The forwarding probability is calculated based on the perceived network load as measured by the arrival rate at the network interface. We evaluate PHR in an urban VANET environment using NS2 (for network traffic) and SUMO (for vehicular movement) simulators, with scenarios configured to re ect real-world conditions. The simulation scenarios are configured to use two velocity profiles i.e. Low and high velocity. The results show that the PHR networks able to achieve best performance as measured by Packet Delivery Ratio (PDR) and Drop Burst Length (DBL) compared to conventional routing protocols in high velocity scenarios

Towards video streaming in IoT environments: vehicular communication perspective

Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: vehicular ad-hoc networks, security and caching, TCP in ad-hoc networks and emerging applications. It is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

On-demand service architecture for wireless vehicular networks

Vehicular Networks (VN) or VANETS has become a cutting-edge topic in the development of innovative solutions for the automotive industry and of special interest to transit management authorities. Well known examples of the potential benefits of enabling communications in vehicles is fostering a better driving by reducing the risk of accidents on the road. Besides the transmission of safety messages among vehicles in the vicinity, the development of non-safety applications will allow the delivery of information services to potential users willing to request them in on-demand basis. To provide such type of services, major challenges need to be tackled to offer secure and reliable communication in anonymous and sometimes hostile communication environments on the roads. These challenges cover security, billing and accounting issues to provide a secure access to services. The objective of this thesis work is to propose a service architecture for on-demand services in vehicular environments. A key point to keep a robust information service supply, stands in the capacity to provide and manage security mechanisms which comprise authentication and authorization of subscribers following a temporary subscription model. These features, along with privacy mechanisms, will offer to the communicating peers a secure way to mutually access and exchange information even if no previous knowledge of each other is available. Policies of service providers can regulate the supply of information services according to the subscribers' profiles. Providers can also define the implementation of accountability models in the form of metering and billing schemes appropriate for VANETS. This will result in the implementation of incentive and collaborative mechanisms to foster service delivery among vehicles

A Distributed Ledger based infrastructure for Intelligent Transportation Systems

Intelligent Transportation Systems (ITS) are proposed as an efficient way to improve performances in transportation systems applying information, communication, and sensor technologies to vehicles and transportation infrastructures. The great amount of vehicles produced data, indeed, can potentially lead to a revolution in ITS development, making them more powerful multifunctional systems. To this purpose, the use of Vehicular Ad-hoc Networks (VANETs) can provide comfort and security to drivers through reliable communications. Meanwhile, distributed ledgers have emerged in recent years radically evolving the way that we used to consider finance, trust in communication and even renewing the concept of data sharing and allowing to establish autonomous, secured, trusted and decentralized systems. In this work an ITS infrastructure based on the combination of different emerging Distributed Ledger Technologies (DLTs) and VANETs is proposed, resulting in a transparent, self-managed and self-regulated system, that is not fully managed by a central authority. The intended design is focused on the user ability to use any type of DLT-based application and to transact using Smart Contracts, but also on the access control and verification over user’s vehicle produced data. Users "smart" transactions are achieved thanks to the Ethereum blockchain, widely used for distributed trusted computation, whilst data sharing and data access is possible thanks to the use of IOTA, a DLT fully designed to operate in the Internet of Things landscape, and IPFS, a protocol and a network that allows to work in a distributed file system. The aim of this thesis is to create a ready-to-work infrastructure based on the hypothesis that every user in the ITS must be able to participate. To evaluate the proposal, an infrastructure implementation is used in different real world use cases, common in Smart Cities and related to the ITS, and performance measurements are carried out for DLTs used

Utilising in-vehicle information to detect traffic conditions in vehicular ad-hoc networks

In the last decade, cooperative vehicular network has been one of the most studied areas for developing the intelligent transportation systems (ITS). It is considered as an important approach to share the periodic traffic situations over vehicular ad hoc networks (VANETs) to improve efficiency and safety over the road. In addition to the uses of ITS, VANETs will contribute in service access, cooperative driving, entertainment and navigation for cars of the future. Vehicle to vehicle and vehicle to infrastructure communication are two distinct avenues that make possible efficient delivery of messages through direct wireless transmissions in traffic regions. Furthermore, promising quality of communication performance is desirable for a communication system composed mostly if roaming participants; such a system needs to be dynamic, flexible and infrastructure-less. Thus VANET architecture is a natural fit for ITS. However, there are a number of issues in exchanging traffic data over high mobility of VANET, such as broadcast storms, hidden nodes and network instability. Therefore, vehicular traffic efficiency applications have been investigated recently using VANET. This aspect of research is primarily concerned with increasing the traffic awareness over roads. In this thesis, a novel model, Efficient Traffic Conditions Detection (ETraCD) is proposed to detect the traffic conditions utilising vehicles’ characteristics and in-vehicles sensors information to evaluate traffic situations that are gathered from the nodes (vehicles) in VANET. The model revolves around the core idea to what extent we will be considering the traffic characteristics between groups of cars rather than individual cars. This does not concern the physical transmission of data but the data processing in the network. More precisely, vehicles are clustered into traffic groups based on the similarity of sensors’s data. ETraCD (a) divides the situations of vehicles into clusters, (b) designs a set of metrics to get the correlations among vehicles and (c) detects the traffic condition in certain areas. These approaches have been simulated in NS3 network simulator to investigate the performance of stability of the network, latency, and the accuracy of traffic situations detection. The proposed model applies V2V clustering paradigm for detecting traffic conditions, it has been implemented and its features investigated through simulation runs. It shows the benefit of using the vehicular sensors informations such as ABS, windscreen lights and so on based on V2V communication to provide an efficient traffic conclusion in urban environment. Experiments also show improved overall performance when compared to previous protocols