Throughput-Delay Trade-Offs in Slotted WDM Ring Networks

International audienceWe analyse the throughput-delay trade-offs that arise in an optical burst-switched slotted WDM ring, where each node can transmit and receive on a subset of the available wavelengths. Specifically, we compare SWING, an access control scheme that combines opportunistic transmission and dynamic reservations, with a purely opportunistic access scheme. By means of analysis, we highlight the shortcomings of the opportunistic scheme in terms of load balancing and fairness. We then evaluate the performance of both schemes by simulation under several traffic scenarios and show that SWING yields a good throughput-delay trade-off

Terabit Burst Switching Final Report

This is the final report For Washington University\u27s Terabit Burst Switching Project, supported by DARPA and Rome Air Force Laboratory. The primary objective of the project has been to demonstrate the feasibility of Burst Switching, a new data communication service, which seeks to more effectively exploit the large bandwidths becoming available in WDM transmission systems. Burst switching systems dynamically assign data bursts to channels in optical datalinks, using routing information carried in parallel control channels

Convergencia de tecnologías ópticas y Ethernet en LAN, MAN y SAN: nuevas arquitecturas, análisis de prestaciones y eficiencia energética

Mención Internacional en el título de doctorThe development of Information Technologies in the last decades, especially the last two, together with the introduction of computing devices to the mainstream consumer market, has had the logical consequence of the generalisation of the Internet access. The explosive development of the smartphone market has brought ubiquity to that generalisation, to the point that social interaction, content sharing and content production happens all the time. Social networks have all but increased that trend, maximising the diffusion of multimedia content: images, audio and video, which require high network capacities to be enjoyed quickly. This need for endless bandwidth and speed in information sharing brings challenges that affect mainly optical Metropolitan Area Networks (MANs) and Wide Area Networks (WANs). Furthermore, the wide spreading of Ethernet technologies has also brought the possibility to achieve economies of scale by either extending the reach of Ethernet Local Area Networks (LANs) to the MAN and WAN environment or even integrating them with Storage Area Networks (SANs). Finally, this generalisation of telecommunication technologies in every day life has as a consequence an important rise in energy consumption as well. Because of this, providing energy efficient strategies in networking is key to ensure the scalability of the whole Internet. In this thesis, the main technologies in all the fields mentioned above are reviewed, its core challenges identified and several contributions beyond the state of the art are suggested to improve today’s MANs andWANs. In the first contribution of this thesism, the integration between Metro Ethernet and Wavelength Division Multiplexion (WDM) optical transparent rings is explored by proposing an adaptation architecture to provide efficient broadcast and multicast. The second contribution explores the fusion between transparent WDM and OCDMA architectures to simplify medium access in a ring. Regarding SANs, the third contribution explores the challenges in SANs through the problems of Fibre Channel over Ethernet due to buffer design issues. In this contribution, analysis, design and validation with FCoE traces and simulation is provided to calculate buffer overflow probabilities in the absence of flow control mechanisms taking into account the bursty nature of SAN traffic. Finally, the fourth and last contribution addresses the problems of energy efficiency in Plastic Optical Fibres (POF), a new kind of optical fibre more suitable for transmission in vehicles and for home networking. This contribution suggests two packet coalescing strategies to further improve the energy effiency mechanisms in POFs.El desarrollo de las Tecnologías de la Información en las últimas décadas, especialmente las últimas dos, junto con la introducción de dispositivos informáticos al mercado de masas, ha tenido como consecuencia lógica la generalización del acceso a Internet. El explosivo desarrollo del mercado de teléfonos inteligentes ha añadido un factor de ubicuidad a tal generalización, al extremo de que la interacción social, la compartición y producción de contenidos sucede a cada instante. Las redes sociales no han hecho sino incrementar tal tendencia, maximizando la difusión de contenido multimedia: imágenes, audio y vídeo, los cuales requieren gran capacidad en las redes para poder obtenerse con rapidez. Esta necesidad de ancho de banda ilimitado y velocidad en la compartición de información trae consigo retos que afectan principalmente a las Redes de Área Metropolitana (Metropolitan Area Networks, MANs) y Redes de Área Extensa (Wide Area Networks, WANs). Además, la gran difusión de las tecnologías Ethernet ha traído la posibilidad de alcanzar economías de escala bien extendiendo el alcance de Ethernet más allá de las Redes de Área Local (Local Area Networks, LANs) al entorno de las MAN y las WAN o incluso integrándolas con Redes de Almacenamiento (Storage Area Networks, SANs). Finalmente, esta generalización de las tecnologías de la comunicación en la vida cotidiana tiene también como consecuencia un importante aumento en el consumo de energía. Por tanto, desarrollar estrategias de transmisión en red eficientes energéticamente es clave para asegurar la escalabilidad de Internet. En esta tesis, las principales tecnologías de todos los campos mencionados arriba serán estudiadas, sus más importantes retos identificados y se sugieren varias contribuciones más allá del actual estado del arte para mejorar las actuales MANs y WANs. En la primera contribución de esta tesis, se explora la integración entre Metro Ethernet y anillos ópticos transparentes por Multiplexión en Longitud de Onda (Wavelength Division Multiplex, WDM) mediante la proposición de una arquitectura de adaptación para permitir la difusión y multidifusión eficiente. La segunda contribución explora la fusión entre las arquitecturas transparentes WDM y arquitecturas por Accesso Dividido Múltiple por Códigos Ópticos (OCDMA) para simplificar el acceso en una red en anillo. En lo referente a las SANs, la tercera contribución explora los retos en SANs a través de los problemas de Fibre Channel sobre Ethernet debido a los problemas en el diseño de búferes. En esta contribución, se provee un análisis, diseño y validación con trazas FCoE para calcular las probabilidades de desbordamiento de buffer en ausencia de mecanismos de control de flujo teniendo en cuenta la naturaleza rafagosa del tráfico de SAN. Finalmente, la cuarta y última contribución aborda los problemas de eficiencia energética en Fibras Ópticas Plásticas (POF), una nueva variedad de fibra óptica más adecuada para la transmisión en vehículos y para entornos de red caseros. Esta contribución sugiere dos estrategias de agrupamiento de paquetes para mejorar los mecanismos de eficiencia energética en POFs.Programa Oficial de Posgrado en Ingeniería TelemáticaPresidente: Luca Valcarenghi.- Secretario: Ignacio Soto Campos.- Vocal: Bas Huiszoo

Design and protection algorithms for path level aggregation of traffic in WDM metro optical networks

Wavelength Division Multiplexing (WDM) promises to offer a cost effective and scalable solution to meet the emerging demands of the Internet. WDM splits the tremendous bandwidth latent in a fiber into multiple non-overlapping wavelength channels, each of which can be operated at the peak electronic rate. Commercial systems with 128 wavelengths and transmission rates of up to 40 Gbps per wavelength have been made possible using state of the art optical technologies to deal with physical impairments. Systems with higher capacities are likely to evolve in the future. The end user requirements for bandwidth, on the other hand, have been ranging from 155 Mbps to 2.5 Gbps. Dedicating a wavelength for each end user will lead to severe underutilization of WDM channels. This brings to forefront the requirement for sharing of bandwidth in a wavelength among multiple end users.;The concept of wavelength sharing among multiple clients is called grooming. Grooming can be done purely at the optical layer (optical grooming) or it can be done with support from the client layer (electronic grooming). The advantage of all optical grooming is the ease of scalability due to its transparency as opposed to electronic grooming which is constrained by electronic bottlenecks. Efforts towards enhancing optical grooming is pursued through increasing optical switching speeds. However, technologies to make optical switches with high speeds, large port counts and low insertion losses have been elusive and may continue to remain so in the near future.;Recently, there have been some research into designing new architectures and protocols focused on optical grooming without resorting to fast optical switching. Typically, this is achieved in three steps: (1) configure the circuit in the form of a path or a tree; (2) use optical devices like couplers or splitters to allow multiple transmitters and/or receivers to share the same circuit; and (3) provide an arbitration mechanism to avoid contention among end users of the circuit. This transparent sharing of the wavelength channel utilizes the network resources better than the conventional low-speed circuit switched approaches. Consequently, it becomes important to quantify the improvement in achieved performance and evaluate if the reaped benefits justify the cost of the required additional hardware and software.;The contribution of this thesis is two fold: (1) developing a new architecture called light-trails as an IP based solution for next generation WDM optical networks, and (2) designing a unified framework to model Path Level Aggregation of Traffic in metrO Optical Networks (PLATOONs). The algorithms suggested here have three features: (1) accounts for four different path level aggregation strategies---namely, point to point (for example, lightpaths), point to multi-point (for example, source based light-trails), multi-point to point (for example, destination based light-trails) and multi-point to multi-point (for example, light-trails); (2) incorporates heterogenous switching architectures; and (3) accommodates multi-rate traffic. Algorithms for network design and survivability are developed for PLATOONs in the presence of both static and dynamic traffic. Connection level dedicated/shared, segregated/mixed protection schemes are formulated for single link failures in the presence of static and dynamic traffic. A simple medium access control protocol that avoids collisions when the channel is shared by multiple clients is also proposed.;Based on extensive simulations, we conclude that, for the studied scenarios, (1) when client layer has no electronic grooming capabilities, light-trails (employing multi-point to multi-point aggregation strategy) perform several orders of magnitude better than lightpaths and (2) when client layer has full electronic grooming capabilities, source based light-trails (employing point to multi-point aggregation strategy) perform the best in wavelength limited scenarios and lightpaths perform the best in transceiver limited scenarios.;The algorithms that are developed here will be helpful in designing optical networks that deploy path level aggregation strategies. The proposed ideas will impact the design of transparent, high-speed all-optical networks.</p