1,706 research outputs found
Millimeter Wave Cellular Networks: A MAC Layer Perspective
The millimeter wave (mmWave) frequency band is seen as a key enabler of
multi-gigabit wireless access in future cellular networks. In order to overcome
the propagation challenges, mmWave systems use a large number of antenna
elements both at the base station and at the user equipment, which lead to high
directivity gains, fully-directional communications, and possible noise-limited
operations. The fundamental differences between mmWave networks and traditional
ones challenge the classical design constraints, objectives, and available
degrees of freedom. This paper addresses the implications that highly
directional communication has on the design of an efficient medium access
control (MAC) layer. The paper discusses key MAC layer issues, such as
synchronization, random access, handover, channelization, interference
management, scheduling, and association. The paper provides an integrated view
on MAC layer issues for cellular networks, identifies new challenges and
tradeoffs, and provides novel insights and solution approaches.Comment: 21 pages, 9 figures, 2 tables, to appear in IEEE Transactions on
Communication
Throughput-Delay Trade-off for Hierarchical Cooperation in Ad Hoc Wireless Networks
Hierarchical cooperation has recently been shown to achieve better throughput
scaling than classical multihop schemes under certain assumptions on the
channel model in static wireless networks. However, the end-to-end delay of
this scheme turns out to be significantly larger than those of multihop
schemes. A modification of the scheme is proposed here that achieves a
throughput-delay trade-off for T(n) between
and , where D(n) and T(n) are
respectively the average delay per bit and the aggregate throughput in a
network of n nodes. This trade-off complements the previous results of El Gamal
et al., which show that the throughput-delay trade-off for multihop schemes is
given by D(n)=T(n) where T(n) lies between and .
Meanwhile, the present paper considers the network multiple-access problem,
which may be of interest in its own right.Comment: 9 pages, 6 figures, to appear in IEEE Transactions on Information
Theory, submitted Dec 200
Hybrid routing and bridging strategies for large scale mobile ad hoc networks
Multi-hop packet radio networks (or mobile ad-hoc networks) are an ideal technology to establish instant communication infrastructure for military and civilian applications in which both hosts and routers are mobile. In this dissertation, a position-based/link-state hybrid, proactive routing protocol (Position-guided Sliding-window Routing - PSR) that provides for a flat, mobile ad-hoc routing architecture is described, analyzed and evaluated. PSR is based on the superposition of link-state and position-based routing, and it employs a simplified way of localizing routing overhead, without having to resort to complex, multiple-tier routing organization schemes. A set of geographic routing zones is defined for each node, where the purpose of the ith routing zone is to restrict propagation of position updates, advertising position differentials equal to the radius of the (i-i )th routing zone. Thus, the proposed protocol controls position-update overhead generation and propagation by making the overhead generation rate and propagation distance directly proportional to the amount of change in a node\u27s geographic position. An analytical model and framework is provided, in order to study the various design issues and trade-offs of PSR routing mechanism, discuss their impact on the protocol\u27s operation and effectiveness, and identify optimal values for critical design parameters, under different mobility scenarios. In addition an in-depth performance evaluation, via modeling and simulation, was performed in order to demonstrate PSR\u27s operational effectiveness in terms of scalability, mobility support, and efficiency. Furthermore, power and energy metrics, such as path fading and battery capacity considerations, are integrated into the routing decision (cost function) in order to improve PSR\u27s power efficiency and network lifetime. It is demonstrated that the proposed routing protocol is ideal for deployment and implementation especially in large scale mobile ad hoc networks.
Wireless local area networks (WLAN) are being deployed widely to support networking needs of both consumer and enterprise applications, and IEEE 802.11 specification is becoming the de facto standard for deploying WLAN. However IEEE 802.11 specifications allow only one hop communication between nodes. A layer-2 bridging solution is proposed in this dissertation, to increase the range of 802.11 base stations using ad hoc networking, and therefore solve the hotspot communication problem, where a large number of mobile users require Internet access through an access point. In the proposed framework nodes are divided into levels based on their distance (hops) from the access point. A layer-2 bridging tree is built based on the level concept, and a node in certain level only forwards packets to nodes in its neighboring level. The specific mechanisms for the forwarding tree establishment as well as for the data propagation are also introduced and discussed. An analytical model is also presented in order to analyze the saturation throughput of the proposed mechanism, while its applicability and effectiveness is evaluated via modeling and simulation. The corresponding numerical results demonstrate and confirm the significant area coverage extension that can be achieved by the solution, when compared with the conventional 802.1 lb scheme. Finally, for implementation purposes, a hierarchical network structure paradigm based on the combination of these two protocols and models is introduced
Green Cellular Networks: A Survey, Some Research Issues and Challenges
Energy efficiency in cellular networks is a growing concern for cellular
operators to not only maintain profitability, but also to reduce the overall
environment effects. This emerging trend of achieving energy efficiency in
cellular networks is motivating the standardization authorities and network
operators to continuously explore future technologies in order to bring
improvements in the entire network infrastructure. In this article, we present
a brief survey of methods to improve the power efficiency of cellular networks,
explore some research issues and challenges and suggest some techniques to
enable an energy efficient or "green" cellular network. Since base stations
consume a maximum portion of the total energy used in a cellular system, we
will first provide a comprehensive survey on techniques to obtain energy
savings in base stations. Next, we discuss how heterogeneous network deployment
based on micro, pico and femto-cells can be used to achieve this goal. Since
cognitive radio and cooperative relaying are undisputed future technologies in
this regard, we propose a research vision to make these technologies more
energy efficient. Lastly, we explore some broader perspectives in realizing a
"green" cellular network technologyComment: 16 pages, 5 figures, 2 table
- …