Wireless industrial monitoring and control networks: the journey so far and the road ahead

While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks

A Comprehensive Analysis of Literature Reported Mac and Phy Enhancements of Zigbee and its Alliances

Wireless communication is one of the most required technologies by the common man. The strength of this technology is rigorously progressing towards several novel directions in establishing personal wireless networks mounted over on low power consuming systems. The cutting-edge communication technologies like bluetooth, WIFI and ZigBee significantly play a prime role to cater the basic needs of any individual. ZigBee is one such evolutionary technology steadily getting its popularity in establishing personal wireless networks which is built on small and low-power digital radios. Zigbee defines the physical and MAC layers built on IEEE standard. This paper presents a comprehensive survey of literature reported MAC and PHY enhancements of ZigBee and its contemporary technologies with respect to performance, power consumption, scheduling, resource management and timing and address binding. The work also discusses on the areas of ZigBee MAC and PHY towards their design for specific applications

Chain Routing for Convergecast Small Scale Wireless Sensor Networks

Wireless sensor networks have many applications involving autonomous sensors transmitting their data to a sink placed in the network. A protocol by name Chain Routing for Convergecast Small Scale (CRCSS) Wireless sensor networks is proposed in this paper. The set of sensor nodes in the network send the data periodically to the sink located in the area of interest. The nodes who cannot reach sink in one hop choose one of the neighbours for forwarding the data to the sink by forming a chain of links. The selection of forwarding node and the waiting period before forwarding plays an important role in the protocol. The proposed CRCSS protocol exhibits improvement in energy spent per packet and latency per packet for a wireless sensor network as compared to ConverSS protocol for small scale wireless sensor networks. In CRCSS protocol energy spent per packet is independent of the network radius

Interference Mitigation in Multi-Hop Wireless Networks with Advanced Physical-Layer Techniques

In my dissertation, we focus on the wireless network coexistence problem with advanced physical-layer techniques. For the first part, we study the problem of Wireless Body Area Networks (WBAN)s coexisting with cross-technology interference (CTI). WBANs face the RF cross-technology interference (CTI) from non-protocol-compliant wireless devices. Werst experimentally characterize the adverse effect on BAN caused by the CTI sources. Then we formulate a joint routing and power control (JRPC) problem, which aims at minimizing energy consumption while satisfying node reachability and delay constraints. We reformulate our problem into a mixed integer linear programing problem (MILP) and then derive the optimal results. A practical JRPC protocol is then proposed. For the second part, we study the coexistence of heterogeneous multi-hop networks with wireless MIMO. We propose a new paradigm, called cooperative interference mitigation (CIM), which makes it possible for disparate networks to cooperatively mitigate the interference to/from each other to enhance everyone\u27s performance. We establish two tractable models to characterize the CIM behaviors of both networks by using full IC (FIC) and receiver-side IC (RIC) only. We propose two bi-criteria optimization problems aiming at maximizing both networks\u27 throughput, while cooperatively canceling the interference between them based on our two models. In the third and fourth parts, we study the coexistence problem with MIMO from a different point of view: the incentive of cooperation. We propose a novel two-round game framework, based on which we derive two networks\u27 equilibrium strategies and the corresponding closed-form utilities. We then extend our game-theoretical analysis to a general multi-hop case, specifically the coexistence problem between primary network and multi-hop secondary network in the cognitive radio networks domain. In the final part, we study the benefits brought by reconfigurable antennas (RA). We systematically exploit the pattern diversity and fast reconfigurability of RAs to enhance the throughput of MWNs. Werst propose a novel link-layer model that captures the dynamic relations between antenna pattern, link coverage and interference. Based on our model, a throughput optimization framework is proposed by jointly considering pattern selection and link scheduling, which is formulated as a mixed integer non-linear programming problem

A Survey on Energy-Efficient Strategies in Static Wireless Sensor Networks

A comprehensive analysis on the energy-efficient strategy in static Wireless Sensor Networks (WSNs) that are not equipped with any energy harvesting modules is conducted in this article. First, a novel generic mathematical definition of Energy Efficiency (EE) is proposed, which takes the acquisition rate of valid data, the total energy consumption, and the network lifetime of WSNs into consideration simultaneously. To the best of our knowledge, this is the first time that the EE of WSNs is mathematically defined. The energy consumption characteristics of each individual sensor node and the whole network are expounded at length. Accordingly, the concepts concerning EE, namely the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective, are proposed. Subsequently, the relevant energy-efficient strategies proposed from 2002 to 2019 are tracked and reviewed. Specifically, they respectively are classified into five categories: the Energy-Efficient Media Access Control protocol, the Mobile Node Assistance Scheme, the Energy-Efficient Clustering Scheme, the Energy-Efficient Routing Scheme, and the Compressive Sensing--based Scheme. A detailed elaboration on both of the basic principle and the evolution of them is made. Finally, further analysis on the categories is made and the related conclusion is drawn. To be specific, the interdependence among them, the relationships between each of them, and the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective are analyzed in detail. In addition, the specific applicable scenarios for each of them and the relevant statistical analysis are detailed. The proportion and the number of citations for each category are illustrated by the statistical chart. In addition, the existing opportunities and challenges facing WSNs in the context of the new computing paradigm and the feasible direction concerning EE in the future are pointed out

Improving the performance of wireless sensor networks using directional antennas

Over the last decades, lots of new applications have emerged thanks to the availability of small devices capable of wireless communications that form Wireless Sensor Networks (WSNs). These devices allow sensing, processing, and communication of multiple physical variables while keeping a low power consumption. During the last years, most of the research efforts were spent on the development and optimization of wireless communication protocols, aiming to maximize the reliability of the network while achieving the lowest possible power consumption. In this thesis, we study how to improve the performance of these WSNs by using directional antennas. Directional antennas can provide a higher gain and reduce the interference with other nodes by concentrating the radiated power in a certain direction. We present the different kinds of directional antennas available for WSNs, and we select the 6-element SPIDA antenna as a case of study. We present an electromagnetic model of this antenna, and we incorporate it into the COOJA network simulator. We report the first complete characterization of this antenna, including the radiation pattern and S11 parameters. The characterization shows that the antenna has a maximum gain of 6.8 dBi, a Half-Power Beamwidth (HPBW) of 113° and a module of S11 parameter of -7.5 dB at the central frequency (fc = 2.4525 GHz). We also present a novel way to optimize the antenna without changing its design by isolating multiple director elements. We show that with this technique, the performance of the antenna can be improved in terms of maximum gain, narrower HPBW, and a lower module of the S11 parameter without making any changes in the antenna itself. We evaluate the impact of supporting directional communications in the different layers of the network stack. We analyze the different challenges that arise and propose optimizations to overcome them in order to take advantage of the benefits of directional communication. We present an analysis of the state-of-the-art in neighbor discovery protocols for WSNs with directional antennas, and we propose, implement end evaluate two novel fully directional protocols: Q-SAND and DANDi. We compare both of them with SAND, a fully directional neighbor discovery protocol. DANDi is a fully directional asynchronous and dynamic neighbor discovery protocol where the contention resolution relies on a collision detection mechanism. To the best of our knowledge, DANDi is the fastest neighbor discovery protocol for WSN with directional antennas, with the additional advantage of being able to discover every reliable communication link in a network without requiring any prior information of the network topology. We combine the directional neighbor discovery protocol with MAC and routing optimizations in order fully take advantage of the benefits of using directional antennas. We focus on convergecast, a typical data collection application where every node sends packets periodically to a sink node. We present DirMAC, a novel MAC protocol that fully supports directional communication, together with four different heuristics to optimize the performance of the protocols. One of these heuristics has the added major benefit of being completely distributed and with no need for offline processing. Our evaluation shows that optimizations at both the MAC and routing layers are needed in order to reap the benefits of using directional antennas for convergecast. Our results show that the performance of the network can be greatly improved in terms of packet delivery rate, energy consumption, and energy per received packet, and that we obtain the largest performance improvements in networks with dense traffic. Simulations with different node densities show that when using directional antennas the PDR increases up to 29%, while energy consumption and energy per received packet decreases by up to 55% and 46% respectively. Experiments with real nodes validate these results showing a significant performance increase when using directional antennas in our scenarios, with a reduction in the RDC and EPRP of 25% and 15% respectively, while maintaining a PDR of 100%.Durante las últimas décadas, la disponibilidad de pequeños dispositivos con comunicación inalámbrica ha permitido el desarrollo de muchas nuevas aplicaciones. Estos dispositivos forman Redes de Sensores Inalámbricos (RSI, o WSN por sus siglas en inglés) que permiten sensar, procesar y comunicar datos provenientes de variables físicas, mientras que mantienen un bajo consumo energético. En los últimos años, la mayor parte de los esfuerzos de la comunidad científica estuvieron concentrados en el desarrollo y optimización de los protocolos de comunicación inalámbricos, buscando maximizar la confiabilidad de la red y minimizar el consumo energético. En esta tesis estudiamos cómo mejorar el rendimiento de las RSI usando antenas direccionales. Las antenas direccionales pueden proporcionar una mayor ganancia y reducir la interferencia con otros nodos al concentrar la potencia radiada en una cierta dirección. Comenzamos presentando los distintos tipos de antenas direccionales disponibles para las RSI, y seleccionamos la antena SPIDA de 6 elementos como caso de estudio. Luego presentamos un modelo electromagnético de la antena, que incorporamos al simulador de red COOJA. Construimos un primer prototipo con el que realizamos la primera caracterización completa de ésta antena, incluyendo el patrón de radiación y el parámetro S11. La caracterización muestra que la antena tiene una ganancia máxima de 6,8 dBi, un ancho de haz a mitad de potencia (HPBW por sus siglas en inglés) de 113° y un módulo del parámetro S11 de -7,5 dB en la frecuencia central (fc = 2,4525 GHz). También mostramos una forma innovadora de optimizar la antena sin cambiar su diseño utilizando varios elementos directores al mismo tiempo. Mostramos que con esta técnica se puede mejorar el rendimiento de la antena en términos de ganancia máxima, ancho de haz a mitad de potencia, y módulo del parámetro S11. Luego evaluamos el impacto de usar comunicaciones direccionales en las diferentes capas del stack de red. Analizamos los diferentes desafíos que surgen y proponemos optimizaciones para sortearlos. Presentamos un análisis del estado del arte en protocolos de descubrimiento de vecinos en RSI con antenas direccionales, y proponemos, implementamos y evaluamos dos protocolos direccionales : Q-SAND y DANDi. DANDi es un protocolo de descubrimiento de vecinos direccional, asíncrono y dinámico, donde la contienda por el canal se resuelve con un mecanismo basado en la detección de colisiones. Hasta donde sabemos, DANDi es el protocolo de descubrimiento de vecinos más rápido para RSI con antenas direccionales, con la ventaja adicional de que permite descubrir todos los enlaces de comunicación confiables de una red sin requerir ningún conocimiento previo de la topología. Luego combinamos los protocolos de descubrimiento de vecinos con optimizaciones en las capas de ruteo y acceso al medio para construir una aplicación de recolección de datos, donde cada nodo envía paquetes periódicamente a un nodo centralizador. Presentamos DirMAC, un protocolo de acceso al medio innovador que soporta comunicaciones direccionales, junto con cuatro heurísticas que permiten optimizar el rendimiento de los protocolos (una de ellas con la ventaja adicional que es totalmente distribuida). Los resultados muestran que usar antenas direccionales en este tipo de aplicaciones permite mejorar sustancialmente el rendimiento de la red, mostrando las mayores mejoras en redes con alto tráfico. Las simulaciones con diferentes densidades de nodos muestran que al usar antenas direccionales se puede aumentar el ratio de entrega de paquetes en hasta 29%, mientras que el consumo energético y la energía por paquete recibido bajan en hasta 55% y 46% respectivamente. Los experimentos en nodos reales validan estos resultados, mostrando una reducción en el consumo energético y en la energía por paquete recibido de 25% y 15% respectivamente, mientras que mantienen un ratio de entrega de paquetes de 100%

An efficient multichannel wireless sensor networks MAC protocol based on IEEE 802.11 distributed co-ordinated function.

This research aimed to create new knowledge and pioneer a path in the area relating to future trends in the WSN, by resolving some of the issues at the MAC layer in Wireless Sensor Networks. This work introduced a Multi-channel Distributed Coordinated Function (MC-DCF) which takes advantage of multi-channel assignment. The backoff algorithm of the IEEE 802.11 distributed coordination function (DCF) was modified to invoke channel switching, based on threshold criteria in order to improve the overall throughput for wireless sensor networks. This work commenced by surveying different protocols: contention-based MAC protocols, transport layer protocols, cross-layered design and multichannel multi-radio assignments. A number of existing protocols were analysed, each attempting to resolve one or more problems faced by the current layers. The 802.15.4 performed very poorly at high data rate and at long range. Therefore 802.15.4 is not suitable for sensor multimedia or surveillance system with streaming data for future multichannel multi-radio systems. A survey on 802.11 DCF - which was designed mainly for wireless networks –supports and confirm that it has a power saving mechanism which is used to synchronise nodes. However it uses a random back-off mechanism that cannot provide deterministic upper bounds on channel access delay and as such cannot support real-time traffic. The weaknesses identified by surveying this protocol form the backbone of this thesis The overall aim for this thesis was to introduce multichannel with single radio as a new paradigm for IEEE 802.11 Distributed Coordinated Function (DCF) in wireless sensor networks (WSNs) that is used in a wide range of applications, from military application, environmental monitoring, medical care, smart buildings and other industry and to extend WSNs with multimedia capability which sense for instance sounds or motion, video sensor which capture video events of interest. Traditionally WSNs do not need high data rate and throughput, since events are normally captured periodically. With the paradigm shift in technology, multimedia streaming has become more demanding than data sensing applications as such the need for high data rate protocol for WSN which is an emerging technology in this area. The IEEE 802.11 can support data rates up to 54Mbps and 802.11 DCF was designed specifically for use in wireless networks. This thesis focused on designing an algorithm that applied multichannel to IEEE 802.11 DCF back-off algorithm to reduce the waiting time of a node and increase throughput when attempting to access the medium. Data collection in WSN tends to suffer from heavy congestion especially nodes nearer to the sink node. Therefore, this thesis proposes a contention based MAC protocol to address this problem from the inspiration of the 802.11 DCF backoff algorithm resulting from a comparison of IEEE 802.11 and IEEE 802.15.4 for Future Green Multichannel Multi-radio Wireless Sensor Networks