148 research outputs found

    A system level simulation study of WiMAX

    Get PDF
    Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 2010.Thesis (Master's) -- Bilkent University, 2010.Includes bibliographical references leaves 56-58.In this thesis, we implement a WiMAX system level simulator compliant with the evaluation methodology document published by the IEEE 802.16m Task Group. We study the PHY abstraction of polar codes and integrate polar codes into the simulator. We compare the system level performances of polar code and convolutional turbo code (CTC) and observe that CTC outperforms polar code. On the simulator, we study the downlink (DL) performance of WiMAX under various configurations such as scheduling methods, subchannelization methods, and frequency reuse models. We study there types of scheduling methods, namely round robin (RR) scheduling, proportional fair (PF) scheduling, and maximum sum rate (MSR) scheduling. We observe that MSR scheduling has the best throughput performance but does not support the users far from the base station. We study three frequency reuse models, namely 1×3×1, 1×3×3, and 3×3×1. We observe that 1 ×3×1 reuse model has the best throughput performance and maximum spectral efficiency is obtained in 1 × 3 × 3 reuse model. We study two subchannelization methods, namely PUSC and band AMC. We observe that in low mobility cases, band AMC outperforms PUSC and in high mobility cases, PUSC is better than band AMC.Başçiftçi, Yüksel OzanM.S

    IST-2000-30148 I-METRA: D3.1 Design, analysis and selection of suitable algorithms

    Get PDF
    This deliverable contains a description of the space-time coding algorithms to be simulated within the I-METRA project. Different families of algorithms have been selected and described in this document with the objective of evaluating their performance. One of the main objectives of the I-METRA project is to impact into the current standardisation efforts related to the introduction of Multiple Input Multiple Output (MIMO) configurations into the High Speed Downlink and Uplink Packet Access concepts of UMTS (HSDPA and HSUPA). This required a review of the current specifications for these systems and the analysis of the impact of the potential incorporation of the selected MIMO schemes.Preprin

    Automatic Modulation Classification for Adaptive Wireless OFDM Systems

    Get PDF

    Cross-Layer Capacity Optimization In OFDMA Systems: WiMAX And LTE

    Get PDF
    Given the broad range of applications supported, high data rate required and low latency promised; dynamic radio resource management is becoming vital for newly emerging air interface technologies such as wireless interoperability for microwave access (Wimax) and long term evolution (lte) adopted by international standards. This thesis considers orthogonal frequency division multiple access (ofdma) system, which has been implemented in both Wimax and lte technologies as their air interface multiple access mechanism. A framework for optimized resource allocation with quality of service (qos) support that aims to balance between service provider\u27s revenue and subscriber\u27s satisfaction is proposed. A cross-layer optimization design for subchannel, for Wimax, and physical resource block (prb), for lte, and power allocations with the objective of maximizing the capacity (in bits/symbol/hz) subject to fairness parameters and qos requirements as constraints is presented. An adaptive modulation and coding (amc)-based cross-layer scheme has also been proposed in this thesis by adopting an amc scheme together with the cross-layer scheme to realize a more practical and viable resource allocation. The optimization does not only consider users channel conditions but also queue status of each user as well as different qos requirements. In the proposed framework, the problem of power allocation is solved analytically while the subchannel/prb allocation is solved using integer programming exhaustive search. The simulation and numerical results obtained in this thesis have shown improved system performance as compared to other optimization schemes known in literature

    Blind LDPC encoder identification

    Get PDF
    Nowadays, adaptive modulation and coding (AMC) techniques can facilitate flexible strategies subject to dynamic channel quality. The AMC transceivers select the most suitable coding and modulation mechanisms subject to the acquired channel information. Meanwhile, a control channel or a preamble is usually required to synchronously coordinate such changes between transmitters and receivers. On the other hand, low-density parity-check (LDPC) codes become more and more popular in recent years due to their promising capacity-approaching property. The broad range of variations in code rates and codeword lengths for LDPC codes makes them ideal candidates for future AMC transceivers. The blind encoder identification problem emerges when the underlying control channel is absent or the preamble is not allowed in AMC systems. It would be quite intriguing for one to build a blind encoder identification technique without spectrum-efficiency sacrifice. Therefore, in this thesis, we investigate blind LDPC encoder identification for AMC systems. Specifically, we would like to tackle the blind identification of binary LDPC codes (encoders) for binary phase-shift keying (BPSK) signals and nonbinary LDPC codes for quadrature-amplitude modulation (QAM) signals. We propose a novel blind identification system which consists of three major components, namely expectation-maximization (EM) estimator for unknown parameters (signal amplitude, noise variance, and phase offset), log-likelihood ratio (LLR) estimator for syndrome a posteriori probabilities, and maximum average-LLR detector. Monte Carlo simulation results demonstrate that our proposed blind LDPC encoder identification scheme is very promising over different signal-to-noise ratio conditions

    Enabling Techniques Design for QoS Provision in Wireless Communications

    Get PDF
    Guaranteeing Quality of Service (QoS) has become a recognized feature in the design of wireless communications. In this thesis, the problem of QoS provision is addressed from different prospectives in several modern communication systems. In the first part of the thesis, a wireless communication system with the base station (BS) associated by multiple subscribers (SS) is considered, where different subscribers require different QoS. Using the cross-layer approach, the conventional single queue finite state Markov chain system model is extended to multiple queues\u27 scenario by combining the MAC layer queue status with the physical layer channel states, modeled by finite state Markov channel (FSMC). To provide the diverse QoS to different subscribers, a priority-based rate allocation (PRA) algorithm is proposed to allocate the physical layer transmission rate to the multiple medium access control (MAC) layer queues, where different queues are assigned with different priorities, leading to their different QoS performance and thus, the diverse QoS are guaranteed. Then, the subcarrier allocation in multi-user OFDM (MU-OFDM) systems is stuied, constrained by the MAC layer diverse QoS requirements. A two-step cross-layer dynamic subcarrier allocation algorithm is proposed where the MAC layer queue status is firstly modeled by a finite state Markov chain, using which MAC layer diverse QoS constraints are transformed to the corresponding minimum physical layer data rate of each user. Then, with the purpose of maximizing the system capacity, the physical layer OFDM subcarriers are allocated to the multiple users to satisfy their minimum data rate requirements, which is derived by the MAC layer queue status model. Finally, the problem of channel assignment in IEEE 802.11 wireless local area networks (WLAN) is investigated, oriented by users\u27 QoS requirements. The number of users in the IEEE 802.11 channels is first determined through the number of different channel impulse responses (CIR) estimated at physical layer. This information is involved thereafter in the proposed channel assignment algorithm, which aims at maximum system throughput, where we explore the partially overlapped IEEE 802.11 channels to provide additional frequency resources. Moreover, the users\u27 QoS requirements are set to trigger the channel assignment process, such that the system can constantly maintain the required QoS

    Mac-Phy Cross-Layer analysis and design of Mimo-Ofdm Wlans based on fast link adaptation

    Get PDF
    The latestWLAN standard, known as IEEE 802.11n, has notably increased the network capacity with respect to its predecessors thanks to the incorporation of the multipleinput multiple-output (MIMO) technology. Nonetheless, the new amendment, as its previous ones, does not specify how crucial configuration mechanisms, most notably the adaptive modulation and coding (AMC) algorithm should be implemented. The AMC process has proved essential to fully exploit the system resources in light of varying channel conditions. In this dissertation, a closed-loop AMC technique, referred to as fast link adaption (FLA) algorithm, that effectively selects themodulation and coding scheme (MCS) for multicarriermultiantennaWLAN networks is proposed. The FLA algorithm determines the MCS that maximizes the throughput while satisfying a quality of service (QoS) constraint, usually defined in the form of an objective packet error rate (PER). To this end, FLA uses a packet/bit error rate prediction methodology based on the exponential effective SNRmetric (EESM). The FLA algorithm performance has been evaluated under IEEE 802.11n systems that thanks to the incorporation of a feedbackmechanismare able to implement closed- loop AMC mechanisms. Initially, this AMC technique relies only on physical layer information but it is subsequently extended to also take into account themediumaccess control (MAC) sublayer performance. At the physical layer, the FLA algorithm has demonstrated its effectivity by performing very close to optimality in terms of throughput, while satisfying a prescribed PER constraint. The FLA algorithm has also been evaluated using imperfect channel information. It has been observed that the proposed FLA technique is rather robust against imperfect channel information, and only in highly-frequency selective channels, imperfect channel knowledge causes a noticeable degradation in throughput. At the MAC sublayer, the FLA algorithm has been complemented with a timeout strategy that weighs down the influence of the available channel information as this becomes outdated. This channel information outdate is caused by the MAC sublayer whose user multiplexing policy potentially results in large delays between acquiring the instant in which the channel state information is acquired and that in which the channel is accessed. Results demonstrate the superiority of FLA when compared to open-loop algorithms under saturated and non-saturated conditions and irrespective of the packet length, number of users, protocol (CSMA/CA or CDMA/E2CA) and access scheme (Basic Access or RTS/CTS). Additionally, several analytical models have been developed to estimate the system performance at the MAC sublayer. These models account for all operational details of the IEEE 802.11n MAC sublayer, such as finite number of retries, anomalous slot or channel errors. In particular, a semi-analytical model that assesses the MAC layer throughput under saturated conditions, considering the AMC performance is first introduced. Then, an analytical model that allows the evaluation of the QoS performance under non-saturated conditions is presented. This model focuses on single MCS and it is able to accurately predict very important system performance metrics such as blocking probability, delay, probability of discard or goodput thanks to the consideration of the finite queues on each station. Finally, the previous non-saturated analytical approach is used to define a semi-analytical model in order to estimate the system performance when considering AMC algorithms (i.e. whenmultiple MCSs are available)La darrera versió de l’estàndard deWLAN, anomenada IEEE 802.11n, ha augmentat la seva capacitat notablement en relació als sistemes anteriors gràcies a la incorporació de la tecnologia de múltiples antenes en transmissió i recepció (MIMO). No obstant això, la nova proposta, al igual que les anteriors, segueix sense especificar com s’han d’implementar elsmecanismes de configuraciómés crucials, un dels quals és l’algoritme de codificació imodulació adaptativa (AMC). Aquests algoritmes ja han demostrat la seva importància a l’hora demaximitzar el rendiment del sistema tenint en compte les condicions canviants del canal. En aquesta tesis s’ha proposat un algoritme AMC de llaç tancat, anomenat adaptació ràpida de l’enllaç (FLA), que selecciona eficientment l’esquema demodulació i codificació adaptativa per xarxes WLAN basades en arquitectures multiportadora multiantena. L’algoritme FLA determina el mode de transmissió capaç de maximitzar el throughput per les condicions de canal actuals, mentre satisfà un requisit de qualitat de servei en forma de taxa d’error per paquet (PER). FLA utilitza una metodologia de predicció de PER basada en l’estimació de la relació senyal renou (SNR) efectiva exponencial (EESM). El rendiment de l’algoritme FLA ha estat avaluat en sistemes IEEE 802.11n, ja que aquests, gràcies a la incorporació d’unmecanisme de realimentació demodes de transmissió, poden adoptar solucions AMC de llaç tancat. En una primera part, l’estudi s’ha centrat a la capa física i després s’ha estès a la subcapa MAC. A la capa física s’ha demostrat l’efectivitat de l’algoritme FLA aconseguint un rendiment molt proper al que ens proporcionaria un esquema AMC òptim en termes de throughput, alhora que es satisfan els requisits de PER objectiu. L’algoritme FLA també ha estat avaluat utilitzant informació imperfecte del canal. S’ha vist que l’algoritme FLA proposat és robust en front dels efectes d’estimació imperfecte del canal, i només en canals altament selectius en freqüència, la informació imperfecte del canal provoca una davallada en el rendiment en termes de throughput. A la subcapa MAC, l’algoritme FLA ha estat complementat amb una estratègia de temps d’espera que disminueix la dependència amb la informació de canal disponible a mesura que aquesta va quedant desfassada respecte de l’estat actual. Aquesta informació de canal desfassada és conseqüència de la subcapa MAC que degut a la multiplexació d’usuaris introdueix grans retards entre que es determina el mode de transmissió més adequat i la seva utilització per a l’accés al canal. Els resultats obtinguts han demostrat la superioritat de FLA respecte d’altres algoritmes de llaç obert en condicions de saturació i de no saturació, i independentment de la longitud de paquet, nombre d’usuaris, protocol (CSMA/CA i CSMA/E2CA) i esquema d’accés (Basic Access i RTS/CTS). Amés, s’han desenvolupat diversosmodels analítics per tal d’estimar el rendiment del sistema a la subcapa MAC. Aquests models consideren tots els detalls de funcionament de la subcapaMAC del 802.11n, comper exemple un nombre finit de retransmissions de cada paquet, l’slot anòmal o els errors introduïts pel canal. Inicialment s’ha proposat unmodel semi-analític que determina el throughtput en condicions de saturació, considerant el rendiment dels algoritmes AMC. Després s’ha presentat un model analític que estima el rendiment del sistema per condicions de no saturació, mitjançat elmodelat de cues finites a cada estació. Aquestmodel consideramodes de transmissió fixes i és capaç de determinar de manera molt precisa mètriques de rendimentmolt importants comsón la probabilitat de bloqueig de cada estació, el retard mitjà del paquets, la probabilitat de descart o la mesura del goodput. Finalment, el model analític de no saturació s’ha utilitzat per definir un model semi-analític per tal d’estimar el rendiment del sistema quan es considera l’ús d’algoritmes AMC

    An efficient scheduling for diverse QoS requirements in WiMAX

    Get PDF
    WiMAX is one of the most important broadband wireless technologies and is anticipated to be a viable alternative to traditional wired broadband techniques due to its cost efficiency. Being an emerging technology, WiMAX supports multimedia applications such as voice over IP (VoIP), voice conference and online gaming. It is necessary to provide Quality of Service (QoS) guaranteed with different characteristics, quite challenging, however, for Broadband Wireless Access (BWA) networks. Therefore, an effective scheduling is critical for the WiMAX system. Many traffic scheduling algorithms are available for wireless networks, e.g. Round Robin, Proportional Fairness (PF) scheme and Integrated Cross-layer scheme (ICL). Among these conventional schemes, some cannot differentiate services, while some can fulfill the service differentiation with a high-complexity implementation. This thesis proposes a novel scheduling algorithm for Orthogonal Frequency Division Multiplex/Time Division Multiple Access (OFDM/TDMA)-based systems, which extends the PF scheme to multiple service types with diverse QoS requirements. The design objective is to provide differentiated services according to their QoS requirements, while the objective can be achieved by adjusting only one unique parameter, the time window for evaluating the average throughput. By extensive simulation, it is shown that the proposed scheduling algorithm exploits the advantage of the PF scheme, enhancing the throughput, and distinguishes the services in terms of the average delay. Afterward, we prove the superiority of the new scheme over the conventional ones by showing simulation results
    • …
    corecore