1,450 research outputs found
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
Multi-service Signal Multiplexing and Isolation for Physical-Layer Network Slicing (PNS)
Network slicing has been identified as one of the most important features for 5G and beyond to enable operators to utilize networks on an as-a-service basis and meet the wide range of use cases. In physical layer, the frequency and time resources are split into slices to cater for the services with individual optimal designs, resulting in services/slices having different baseband numerologies (e.g., subcarrier spacing) and / or radio frequency (RF) front-end configurations. In such a system, the multi-service signal multiplexing and isolation among the service/slices are critical for the Physical-Layer Network Slicing (PNS) since orthogonality is destroyed and significant inter-service/ slice-band-interference (ISBI) may be generated. In this paper, we first categorize four PNS cases according to the baseband and RF configurations among the slices. The system model is established by considering a low out of band emission (OoBE) waveform operating in the service/slice frequency band to mitigate the ISBI. The desired signal and interference for the two slices are derived. Consequently, one-tap channel equalization algorithms are proposed based on the derived model. The developed system models establish a framework for further interference analysis, ISBI cancelation algorithms, system design and parameter selection (e.g., guard band), to enable spectrum efficient network slicing
State-of-the-art in Power Line Communications: from the Applications to the Medium
In recent decades, power line communication has attracted considerable
attention from the research community and industry, as well as from regulatory
and standardization bodies. In this article we provide an overview of both
narrowband and broadband systems, covering potential applications, regulatory
and standardization efforts and recent research advancements in channel
characterization, physical layer performance, medium access and higher layer
specifications and evaluations. We also identify areas of current and further
study that will enable the continued success of power line communication
technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on
Selected Areas in Communications. Special Issue on Power Line Communications
and its Integration with the Networking Ecosystem. 201
Learning and Management for Internet-of-Things: Accounting for Adaptivity and Scalability
Internet-of-Things (IoT) envisions an intelligent infrastructure of networked
smart devices offering task-specific monitoring and control services. The
unique features of IoT include extreme heterogeneity, massive number of
devices, and unpredictable dynamics partially due to human interaction. These
call for foundational innovations in network design and management. Ideally, it
should allow efficient adaptation to changing environments, and low-cost
implementation scalable to massive number of devices, subject to stringent
latency constraints. To this end, the overarching goal of this paper is to
outline a unified framework for online learning and management policies in IoT
through joint advances in communication, networking, learning, and
optimization. From the network architecture vantage point, the unified
framework leverages a promising fog architecture that enables smart devices to
have proximity access to cloud functionalities at the network edge, along the
cloud-to-things continuum. From the algorithmic perspective, key innovations
target online approaches adaptive to different degrees of nonstationarity in
IoT dynamics, and their scalable model-free implementation under limited
feedback that motivates blind or bandit approaches. The proposed framework
aspires to offer a stepping stone that leads to systematic designs and analysis
of task-specific learning and management schemes for IoT, along with a host of
new research directions to build on.Comment: Submitted on June 15 to Proceeding of IEEE Special Issue on Adaptive
and Scalable Communication Network
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
Towards Massive Machine Type Communications in Ultra-Dense Cellular IoT Networks: Current Issues and Machine Learning-Assisted Solutions
The ever-increasing number of resource-constrained Machine-Type Communication
(MTC) devices is leading to the critical challenge of fulfilling diverse
communication requirements in dynamic and ultra-dense wireless environments.
Among different application scenarios that the upcoming 5G and beyond cellular
networks are expected to support, such as eMBB, mMTC and URLLC, mMTC brings the
unique technical challenge of supporting a huge number of MTC devices, which is
the main focus of this paper. The related challenges include QoS provisioning,
handling highly dynamic and sporadic MTC traffic, huge signalling overhead and
Radio Access Network (RAN) congestion. In this regard, this paper aims to
identify and analyze the involved technical issues, to review recent advances,
to highlight potential solutions and to propose new research directions. First,
starting with an overview of mMTC features and QoS provisioning issues, we
present the key enablers for mMTC in cellular networks. Along with the
highlights on the inefficiency of the legacy Random Access (RA) procedure in
the mMTC scenario, we then present the key features and channel access
mechanisms in the emerging cellular IoT standards, namely, LTE-M and NB-IoT.
Subsequently, we present a framework for the performance analysis of
transmission scheduling with the QoS support along with the issues involved in
short data packet transmission. Next, we provide a detailed overview of the
existing and emerging solutions towards addressing RAN congestion problem, and
then identify potential advantages, challenges and use cases for the
applications of emerging Machine Learning (ML) techniques in ultra-dense
cellular networks. Out of several ML techniques, we focus on the application of
low-complexity Q-learning approach in the mMTC scenarios. Finally, we discuss
some open research challenges and promising future research directions.Comment: 37 pages, 8 figures, 7 tables, submitted for a possible future
publication in IEEE Communications Surveys and Tutorial
- …