Trading Wireless Information and Power Transfer: Relay Selection to Minimize the Outage Probability

This paper studies the outage probability minimization problem for a multiple relay network with energy harvesting constraints. The relays are hybrid nodes used for simultaneous wireless information and power transfer from the source radio frequency (RF) signals. There is a trade-off associated with the amount of time a relay node is used for energy and information transfer. Large intervals of information transfer implies little time for energy harvesting from RF signals and thus, high probability of outage events. We propose relay selection schemes for a cooperative system with a fixed number of RF powered relays. We address both causal and non-causal channel state information cases at the relay--destination link and evaluate the trade-off associated with information/power transfer in the context of minimization of outage probability.Comment: IEEE GlobalSiP, 201

Relaying in the Internet of Things (IoT): A Survey

The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions

Performance analysis of power-splitting relaying protocol in SWIPT based cooperative NOMA systems

This paper investigates a relay assisted simultaneous wireless information and power transfer (SWIPT) for downlink in cellular systems. Cooperative non-orthogonal multiple access (C-NOMA) is employed along with power splitting protocol to enable both energy harvesting (EH) and information processing (IP). A downlink model consists of a base station (BS) and two users is considered, in which the near user (NU) is selected as a relay to forward the received signal from the BS to the far user (FU). Maximum ratio combining is then employed at the FU to combine both the signals received from the BS and NU. Closed form expressions of outage probability, throughput, ergodic rate and energy efficiency (EE) are firstly derived for the SWIPT based C-NOMA considering both scenarios of with and without direct link between the BS and FU. The impacts of EH time, EH efficiency, power-splitting ratio, source data rate and distance between different nodes on the performance are then investigated. The simulation results show that the C-NOMA with direct link achieves an outperformed performance over C-NOMA without direct link. Moreover, the performance of C-NOMA with direct link is also higher than that for OMA. Specifically, (1) the outage probability for C-NOMA in both direct and relaying link cases is always lower than that for OMA. (2) the outage probability, throughput and ergodic rate vary according to β, (3) the EE of both users can obtain in SNR range of from -10 to 5 dB and it decreases linearly as SNR increases. Numerical results are provided to verify the findings

Full-Duplex Cooperative Cognitive Radio Networks with Wireless Energy Harvesting

This paper proposes and analyzes a new full-duplex (FD) cooperative cognitive radio network with wireless energy harvesting (EH). We consider that the secondary receiver is equipped with a FD radio and acts as a FD hybrid access point (HAP), which aims to collect information from its associated EH secondary transmitter (ST) and relay the signals. The ST is assumed to be equipped with an EH unit and a rechargeable battery such that it can harvest and accumulate energy from radio frequency (RF) signals transmitted by the primary transmitter (PT) and the HAP. We develop a novel cooperative spectrum sharing (CSS) protocol for the considered system. In the proposed protocol, thanks to its FD capability, the HAP can receive the PT's signals and transmit energy-bearing signals to charge the ST simultaneously, or forward the PT's signals and receive the ST's signals at the same time. We derive analytical expressions for the achievable throughput of both primary and secondary links by characterizing the dynamic charging/discharging behaviors of the ST battery as a finite-state Markov chain. We present numerical results to validate our theoretical analysis and demonstrate the merits of the proposed protocol over its non-cooperative counterpart.Comment: 6 pages, 3 figures, conferenc