ETC-based control of underactuated AUVs and AUV formations in a 2D plane

This master thesis is aimed at single auv (autonomous underwater vehicle) and auv formation control in two-dimensional horizontal plane. For sake of increasing services life and saving communication resources, event-triggered mechanism is taken into consideration. two coordinate systems are introduced: earth-fixed frame and body-fixed frame. Some motion parameters and force analysis are used in the process of establishing mathematical model. then the related theorems, lemmas and control method commonly used in analyzing control systems are introduced. then, the auv control system is divided into two subsystems with cascade relationship. considering each subsystem separately, a controller is designed that can simultaneously carry out trajectory tracking and point stabilization. considering the service life of actuator equipment, an event-triggered controller was designed, which can reduce the frequency of actuator adjustment, prolong the service life of equipment. finally, combining the idea of light-of-sight method and virtual structure method, the auv formation tracking control problem is solved similarly to single auv. in deep sea conditions, an event- triggered communicating mechanism is designed to reduce the frequency of communication and adapt to limited communication resources, which balances the reliability and economy. matlab simulink is used to simulate the controller designed in the thesis, and confirms the feasibility of the controller

Formation Control of Unmanned Surface Vehicles with Sensing Constraints Using Exponential Remapping Method

This paper presents a formation control strategy for unmanned surface vehicles (USVs) with sensing constraints moving in a leader-follower formation. Each USV is assumed to be equipped with a vision-based sensor, which is able to get the line-of-sight (LOS) range and bearing information. Most existing literature assumes that the USVs in formation control are with no sensing limitations or with 360-degree sensing fields; however, in our research, the vision-based sensor’s capability is restricted due to limited Field of View (FOV) and visual range. We consider that each USV in formation problem is equipped with a sector-like sensing field sensor for the leader-follower formation in two-dimensional space. The formation controller is developed by employing backstepping control technique and exponential remapping. The backstepping controller is designed to stabilize the triangular formation of three USVs, and the proposed exponential remapping method is to deal with the sector-like sensing constraint problem. Comparative analysis with three exponential remapping methods using numerical simulations is given to demonstrate the effectiveness of the proposed method

Distributed Robust Learning-Based Backstepping Control Aided with Neurodynamics for Consensus Formation Tracking of Underwater Vessels

This paper addresses distributed robust learning-based control for consensus formation tracking of multiple underwater vessels, in which the system parameters of the marine vessels are assumed to be entirely unknown and subject to the modeling mismatch, oceanic disturbances, and noises. Towards this end, graph theory is used to allow us to synthesize the distributed controller with a stability guarantee. Due to the fact that the parameter uncertainties only arise in the vessels' dynamic model, the backstepping control technique is then employed. Subsequently, to overcome the difficulties in handling time-varying and unknown systems, an online learning procedure is developed in the proposed distributed formation control protocol. Moreover, modeling errors, environmental disturbances, and measurement noises are considered and tackled by introducing a neurodynamics model in the controller design to obtain a robust solution. Then, the stability analysis of the overall closed-loop system under the proposed scheme is provided to ensure the robust adaptive performance at the theoretical level. Finally, extensive simulation experiments are conducted to further verify the efficacy of the presented distributed control protocol

Development of Robust Control Strategies for Autonomous Underwater Vehicles

The resources of the energy and chemical balance in the ocean sustain mankind in many ways. Therefore, ocean exploration is an essential task that is accomplished by deploying Underwater Vehicles. An Underwater Vehicle with autonomy feature for its navigation and control is called Autonomous Underwater Vehicle (AUV). Among the task handled by an AUV, accurately positioning itself at a desired position with respect to the reference objects is called set-point control. Similarly, tracking of the reference trajectory is also another important task. Battery recharging of AUV, positioning with respect to underwater structure, cable, seabed, tracking of reference trajectory with desired accuracy and speed to avoid collision with the guiding vehicle in the last phase of docking are some significant applications where an AUV needs to perform the above tasks. Parametric uncertainties in AUV dynamics and actuator torque limitation necessitate to design robust control algorithms to achieve motion control objectives in the face of uncertainties. Sliding Mode Controller (SMC), H / μ synthesis, model based PID group controllers are some of the robust controllers which have been applied to AUV. But SMC suffers from less efficient tuning of its switching gains due to model parameters and noisy estimated acceleration states appearing in its control law. In addition, demand of high control effort due to high frequency chattering is another drawback of SMC. Furthermore, real-time implementation of H / μ synthesis controller based on its stability study is restricted due to use of linearly approximated dynamic model of an AUV, which hinders achieving robustness. Moreover, model based PID group controllers suffer from implementation complexities and exhibit poor transient and steady-state performances under parametric uncertainties. On the other hand model free Linear PID (LPID) has inherent problem of narrow convergence region, i.e.it can not ensure convergence of large initial error to zero. Additionally, it suffers from integrator-wind-up and subsequent saturation of actuator during the occurrence of large initial error. But LPID controller has inherent capability to cope up with the uncertainties. In view of addressing the above said problem, this work proposes wind-up free Nonlinear PID with Bounded Integral (BI) and Bounded Derivative (BD) for set-point control and combination of continuous SMC with Nonlinear PID with BI and BD namely SM-N-PID with BI and BD for trajectory tracking. Nonlinear functions are used for all P,I and D controllers (for both of set-point and tracking control) in addition to use of nonlinear tan hyperbolic function in SMC(for tracking only) such that torque demand from the controller can be kept within a limit. A direct Lyapunov analysis is pursued to prove stable motion of AUV. The efficacies of the proposed controllers are compared with other two controllers namely PD and N-PID without BI and BD for set-point control and PD plus Feedforward Compensation (FC) and SM-NPID without BI and BD for tracking control. Multiple AUVs cooperatively performing a mission offers several advantages over a single AUV in a non-cooperative manner; such as reliability and increased work efficiency, etc. Bandwidth limitation in acoustic medium possess challenges in designing cooperative motion control algorithm for multiple AUVs owing to the necessity of communication of sensors and actuator signals among AUVs. In literature, undirected graph based approach is used for control design under communication constraints and thus it is not suitable for large number of AUVs participating in a cooperative motion plan. Formation control is a popular cooperative motion control paradigm. This thesis models the formation as a minimally persistent directed graph and proposes control schemes for maintaining the distance constraints during the course of motion of entire formation. For formation control each AUV uses Sliding Mode Nonlinear PID controller with Bounded Integrator and Bounded Derivative. Direct Lyapunov stability analysis in the framework of input-to-state stability ensures the stable motion of formation while maintaining the desired distance constraints among the AUVs

Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Cooperative Control and Fault Recovery for Network of Heterogeneous Autonomous Underwater Vehicles

The purpose of this thesis is to develop cooperative recovery control schemes for a team of heterogeneous autonomous underwater vehicles (AUV). The objective is to have the network of autonomous underwater vehicles follow a desired trajectory while agents maintain a desired formation. It is assumed that the model parameters associated with each vehicle is different although the order of the vehicles are the same. Three cooperative control schemes based on dynamic surface control (DSC) technique are developed. First, a DSC-based centralized scheme is presented in which there is a central controller that has access to information of all agents at the same time and designs the optimal solution for this cooperative problem. This scheme is used as a benchmark to evaluate the performance of other schemes developed in this thesis. Second, a DSC-based decentralized scheme is presented in which each agent designs its controller based on only its information and the information of its desired trajectory. In this scheme, there is no information exchange among the agents in the team. This scheme is also developed for the purpose of comparative studies. Third, two different semi-decentralized or distributed schemes for the network of heterogeneous autonomous underwater vehicles are proposed. These schemes are a synthesis of a consensus-based algorithm and the dynamic surface control technique with the difference that in one of them the desired trajectories of agents are used in the consensus algorithm while in the other the actual states of the agents are used. In the former scheme, the agents communicate their desired relative distances with the agents within their set of nearest neighbors and each agent determines its own control trajectory. In this semi-decentralized scheme, the velocity measurements of the virtual leader and all the followers are not required to reach the consensus formation. However, in the latter, agents communicate their relative distances and velocities with the agents within their set of nearest neighbors. In both semi-decentralized schemes only a subset of agents has access to information of a virtual leader. The comparative studies between these two semi-decentralized schemes are provided which show the superiority of the former semi-decentralized scheme over latter. Furthermore, to evaluate the efficiency of the proposed DSC-based semi-decentralized scheme with consensus algorithm using desired trajectories, a comparative study is performed between this scheme and three cooperative schemes of model-dependent coordinated tracking algorithm, namely the centralized, decentralized, and semi-decentralized schemes. Given that the dynamics of autonomous underwater vehicles are inevitably subjected to system faults, and in particular the actuator faults, to improve the performance of the network of agents, active fault-tolerant control strategies corresponding to the three developed schemes are also designed to recover the team from the loss-of-effectiveness in the actuators and to ensure that the closed-loop signals remain bounded and the team of heterogeneous autonomous underwater vehicles satisfy the overall design specifications and requirements. The results of this research can potentially be used in various marine applications such as underwater oil and gas pipeline inspection and repairing, monitoring oil and gas pipelines, detecting and preventing any oil and gas leakages. However, the applications of the proposed cooperative control and its fault-tolerant scheme are not limited to underwater formation path-tracking and can be applied to any other multi-vehicle systems that are characterized by Euler–Lagrange equations

UAV Formation Control under Fixed and Variable Adjacency based Directed Network Topologies

The UAV formation control is one of the key aspects in several applications like surveillance, moving target tracking, load-transportation, and delivery systems etc. These situations demand the multiple UAVs to manoeuvre in a desired formation. To address this problem, a distributed formation control scheme is proposed incorporating the details about the state of the neighbouring UAVs. The communication network topology among the UAVs is considered to be directed with the constant and the weighted adjacency matrices. The nonholonomic constraints are considered while deriving the desired Euler angles. Satisfying the conditions of Lyapunov provides necessary proof of stability along the positional and the attitude subsystems. Simulation results demonstrate that the desired tetrahedron, octahedron, and cube shapes are attained and maintained by the UAVs successfully. Also, the designed formation paradigm works proficiently for both the constant and the weighted adjacency matrices based directed network topologies. The performance validation is done through extensive comparative analysis for varying network connections

Development of Path Following and Cooperative Motion Control Algorithms for Autonomous Underwater Vehicles

Research on autonomous underwater vehicle (AUV) is motivating and challenging owing to their specific applications such as defence, mine counter measure, pipeline inspections, risky missions e.g. oceanographic observations, bathymetric surveys, ocean floor analysis, military uses, and recovery of lost man-made objects. Motion control of AUVs is concerned with navigation, path following and co-operative motion control problems. A number of control complexities are encountered in AUV motion control such as nonlinearities in mass matrix, hydrodynamic terms and ocean currents. These pose challenges to develop efficient control algorithms such that the accurate path following task and effective group co-ordination can be achieved in face of parametric uncertainties and disturbances and communication constraints in acoustic medium. This thesis first proposes development of a number of path following control laws and new co-operative motion control algorithms for achieving successful motion control objectives. These algorithms are potential function based proportional derivative path following control laws, adaptive trajectory based formation control, formation control of multiple AUVs steering towards a safety region, mathematical potential function based flocking control and fuzzy potential function based flocking control. Development of a path following control algorithm aims at generating appropriate control law, such that an AUV tracks a predefined desired path. In this thesis first path following control laws are developed for an underactuated (the number of inputs are lesser than the degrees of freedom) AUV. A potential function based proportional derivative (PFPD) control law is derived to govern the motion of the AUV in an obstacle-rich environment (environment populated by obstacles). For obstacle avoidance, a mathematical potential function is exploited, which provides a repulsive force between the AUV and the solid obstacles intersecting the desired path. Simulations were carried out considering a special type of AUV i.e. Omni Directional Intelligent Navigator (ODIN) to study the efficacy of the developed PFPD controller. For achieving more accuracy in the path following performance, a new controller (potential function based augmented proportional derivative, PFAPD) has been designed by the mass matrix augmentation with PFPD control law. Simulations were made and the results obtained with PFAPD controller are compared with that of PFPD controlle