A parallel algorithm for switch-level timing simulation on a hypercube multiprocessor

The parallel approach to speeding up simulation is studied, specifically the simulation of digital LSI MOS circuitry on the Intel iPSC/2 hypercube. The simulation algorithm is based on RSIM, an event driven switch-level simulator that incorporates a linear transistor model for simulating digital MOS circuits. Parallel processing techniques based on the concepts of Virtual Time and rollback are utilized so that portions of the circuit may be simulated on separate processors, in parallel for as large an increase in speed as possible. A partitioning algorithm is also developed in order to subdivide the circuit for parallel processing

PC-CUBE: A Personal Computer Based Hypercube

PC-CUBE is an ensemble of IBM PCs or close compatibles connected in the hypercube topology with ordinary computer cables. Communication occurs at the rate of 115.2 K-band via the RS-232 serial links. Available for PC-CUBE is the Crystalline Operating System III (CrOS III), Mercury Operating System, CUBIX and PLOTIX which are parallel I/O and graphics libraries. A CrOS performance monitor was developed to facilitate the measurement of communication and computation time of a program and their effects on performance. Also available are CXLISP, a parallel version of the XLISP interpreter; GRAFIX, some graphics routines for the EGA and CGA; and a general execution profiler for determining execution time spent by program subroutines. PC-CUBE provides a programming environment similar to all hypercube systems running CrOS III, Mercury and CUBIX. In addition, every node (personal computer) has its own graphics display monitor and storage devices. These allow data to be displayed or stored at every processor, which has much instructional value and enables easier debugging of applications. Some application programs which are taken from the book Solving Problems on Concurrent Processors (Fox 88) were implemented with graphics enhancement on PC-CUBE. The applications range from solving the Mandelbrot set, Laplace equation, wave equation, long range force interaction, to WaTor, an ecological simulation

Improving the Immunity of Hybrid SET/MOS Circuits Using Boltzmann Machine Network

Rapid progress in the fabrication technology of silicon nano devices has pushed the device dimension toward 1- 100nm length scale, which renders the basic working principles of CMOS devices more dependent upon quantum effects and doping fluctuations. When device dimensions are scaled down to a few nanometers, quantum effects such as single electron tunneling (SET) and energy quantization lead to interesting new device characteristics that can be exploited to create extremely compact circuits. The SET is one type of nanoscale electronic devices based on quantum tunneling and Coulomb blockade effect, where one or more Coulomb islands are sandwiched between two tunnel junctions which connect respectively with the drain electrode and the source electrode, and are capacitively coupled with one or more gate electrodes. However, both pure SET devices and hybrid SET-MOS circuits face a big problem – the background charges, which influence the accuracy of the circuit. In order to improve their immunity against these charges, we introduce the neuron network ‘Boltzmann machine’ into the circuit. This idea is to improve the accuracy with increasing time redundancy. Single-electron circuits show stochastic behaviors in their operation because of the probabilistic nature of electron tunneling phenomena. They can therefore be successfully used for implementing the stochastic neuron operation of Boltzmann machines. This thesis proposes applications of Boltzmann machine network to improve the immunity of hybrid SET/MOS circuits to overcome random background charges. Detailed unit neuron block and whole neuron network model are used to design hybrid SET/MOS circuits. Two applications based on Boltzmann machine are proposed: (1) Multi-bit A/D converter, and (2) One-bit full adder. Simulation was done using Cadence Spectre simulator with 180nm CMOS model and SET MIB macro model for performance evaluation. And it is expected that our idea can be extended to other hybrid SETMOS

Custom Integrated Circuits

Contains reports on nine research projects.Analog Devices, Inc.International Business Machines, Inc.Joint Services Electronics Program (Contract DAALO03-86-K-0002)U.S. Air Force - Office of Scientific Research (Grant AFOSR 86-0164)Rockwell International CorporationOKI SemiconductorU.S. Navy - Office of Naval Research (Contract N00014-81-K-0742)Charles Stark Draper LaboratoryDARPA/U.S. Navy - Office of Naval Research (Contract N00014-80-C-0622)DARPA/U.S. Navy - Office of Naval Research (Contract N00014-87-K-0825)National Science Foundation (Grant ECS-83-10941)AT&T Bell Laboratorie

Metodologia Per la Caratterizzazione di amplificatori a basso rumore per UMTS

In questo lavoro si presenta una metodologia di progettazione elettronica a livello di sistema, affrontando il problema della caratterizzazione dello spazio di progetto dell' amplificatore a basso rumore costituente il primo stadio di un front end a conversione diretta per UMTS realizzato in tecnologia CMOS con lunghezza di canale .18u. La metodologia è sviluppata al fine di valutare in modo quantititativo le specifiche ottime di sistema per il front-end stesso e si basa sul concetto di Piattaforma Analogica, che prevede la costruzione di un modello di prestazioni per il blocco analogico basato su campionamento statistico di indici di prestazioni del blocco stesso, misurati tramite simulazione di dimensionamenti dei componenti attivi e passivi soddisfacenti un set di equazioni specifico della topologia circuitale. Gli indici di prestazioni vengono successivamente ulizzati per parametrizzare modelli comportamentali utilizzati nelle fasi di ottimizzazione a livello di sistema. Modelli comportamentali atti a rappresentare i sistemi RF sono stati pertanto studiati per ottimizzare la scelta delle metriche di prestazioni. L'ottimizzazione dei set di equazioni atti a selezionare le configurazione di interesse per il campionamento ha al tempo stesso richiesto l'approfondimento dei modelli di dispositivi attivi validi in tutte le regioni di funzionamento, e lo studio dettagliato della progettazione degli amplificatori a basso rumore basati su degenerazione induttiva. Inoltre, il problema della modellizzazione a livello di sistema degli effetti della comunicazione tra LNA e Mixer è stato affrontato proponendo e analizzando diverse soluzioni. Il lavoro ha permesso di condurre un'ottimizzazione del front-end UMTS, giungendo a specifiche ottime a livello di sistema per l'amplificatore stesso