Unified clustering and communication protocol for wireless sensor networks

In this paper we present an energy-efficient cross layer protocol for providing application specific reservations in wireless senor networks called the “Unified Clustering and Communication Protocol ” (UCCP). Our modular cross layered framework satisfies three wireless sensor network requirements, namely, the QoS requirement of heterogeneous applications, energy aware clustering and data forwarding by relay sensor nodes. Our unified design approach is motivated by providing an integrated and viable solution for self organization and end-to-end communication is wireless sensor networks. Dynamic QoS based reservation guarantees are provided using a reservation-based TDMA approach. Our novel energy-efficient clustering approach employs a multi-objective optimization technique based on OR (operations research) practices. We adopt a simple hierarchy in which relay nodes forward data messages from cluster head to the sink, thus eliminating the overheads needed to maintain a routing protocol. Simulation results demonstrate that UCCP provides an energy-efficient and scalable solution to meet the application specific QoS demands in resource constrained sensor nodes. Index Terms — wireless sensor networks, unified communication, optimization, clustering and quality of service

Data and resource management in wireless networks via data compression, GPS-free dissemination, and learning

“This research proposes several innovative approaches to collect data efficiently from large scale WSNs. First, a Z-compression algorithm has been proposed which exploits the temporal locality of the multi-dimensional sensing data and adapts the Z-order encoding algorithm to map multi-dimensional data to a one-dimensional data stream. The extended version of Z-compression adapts itself to working in low power WSNs running under low power listening (LPL) mode, and comprehensively analyzes its performance compressing both real-world and synthetic datasets. Second, it proposed an efficient geospatial based data collection scheme for IoTs that reduces redundant rebroadcast of up to 95% by only collecting the data of interest. As most of the low-cost wireless sensors won’t be equipped with a GPS module, the virtual coordinates are used to estimate the locations. The proposed work utilizes the anchor-based virtual coordinate system and DV-Hop (Distance vector of hops to anchors) to estimate the relative location of nodes to anchors. Also, it uses circle and hyperbola constraints to encode the position of interest (POI) and any user-defined trajectory into a data request message which allows only the sensors in the POI and routing trajectory to collect and route. It also provides location anonymity by avoiding using and transmitting GPS location information. This has been extended also for heterogeneous WSNs and refined the encoding algorithm by replacing the circle constraints with the ellipse constraints. Last, it proposes a framework that predicts the trajectory of the moving object using a Sequence-to-Sequence learning (Seq2Seq) model and only wakes-up the sensors that fall within the predicted trajectory of the moving object with a specially designed control packet. It reduces the computation time of encoding geospatial trajectory by more than 90% and preserves the location anonymity for the local edge servers”--Abstract, page iv

Data-Gathering and Aggregation Protocol for Networked Carrier Ad Hoc Networks: The Optimal and Heuristic Approach

In this chapter, we address the problem of data-gathering and aggregation (DGA) in navigation carrier ad hoc networks (NC-NET), in order to reduce energy consumption and enhance network scalability and lifetime. Several clustering algorithms have been presented for vehicle ad hoc network (VANET) and other mobile ad hoc network (MANET). However, DGA approach in harsh environments, in terms of long-range transmission, high dynamic topology and three-dimensional monitor region, is still an open issue. In this chapter, we propose a novel clustering-based DGA approach, namely, distributed multiple-weight data-gathering and aggregation (DMDG) protocol, to guarantee quality of service (QoS)-aware DGA for heterogeneous services in above harsh environments. Our approach is explored by the synthesis of three kernel features. First, the network model is addressed according to specific conditions of networked carrier ad hoc networks (NC-NET), and several performance indicators are selected. Second, a distributed multiple-weight data-gathering and aggregation protocol (DMDG) is proposed, which contains all-sided active clustering scheme and realizes long-range real-time communication by tactical data link under a time-division multiple access/carrier sense multiple access (TDMA/CSMA) channel sharing mechanism. Third, an analytical paradigm facilitating the most appropriate choice of the next relay is proposed. Experimental results have shown that DMDG scheme can balance the energy consumption and extend the network lifetime notably and outperform LEACH, PEACH and DEEC in terms of network lifetime and coverage rate, especially in sparse node density or anisotropic topologies

Alibi framework for identifying reactive jamming nodes in wireless LAN

Reactive jamming nodes are the nodes of the network that get compromised and become the source of jamming attacks. They assume to know any shared secrets and protocols used in the networks. Thus, they can jam very effectively and are very stealthy. We propose a novel approach to identifying the reactive jamming nodes in wireless LAN (WLAN). We rely on the half-duplex nature of nodes: they cannot transmit and receive at the same time. Thus, if a compromised node jams a packet, it cannot guess the content of the jammed packet. More importantly, if an honest node receives a jammed packet, it can prove that it cannot be the one jamming the packet by showing the content of the packet. Such proofs of jammed packets are called "alibis" - the key concept of our approach. In this paper, we present an alibi framework to deal with reactive jamming nodes in WLAN. We propose a concept of alibi-safe topologies on which our proposed identification algorithms are proved to correctly identify the attackers. We further propose a realistic protocol to implement the identification algorithm. The protocol includes a BBC-based timing channel for information exchange under the jamming situation and a similarity hashing technique to reduce the storage and network overhead. The framework is evaluated in a realistic TOSSIM simulation where the simulation characteristics and parameters are based on real traces on our small-scale MICAz test-bed. The results show that in reasonable dense networks, the alibi framework can accurately identify both non-colluding and colluding reactive jamming nodes. Therefore, the alibi approach is a very promising approach to deal with reactive jamming nodes.published or submitted for publicationnot peer reviewe

Novel Medium Access Control (MAC) Protocols for Wireless Sensor and Ad Hoc Networks (WSANs) and Vehicular Ad Hoc Networks (VANETs)

Efficient medium access control (MAC) is a key part of any wireless network communication architecture. MAC protocols are needed for nodes to access the shared wireless medium efficiently. Providing high throughput is one of the primary goals of the MAC protocols designed for wireless networks. MAC protocols for Wireless Sensor and Ad hoc networks (WSANs) must also conserve energy as sensor nodes have limited battery power. On the other hand, MAC protocols for Vehicular Ad hoc networks (VANETs) must also adapt to the highly dynamic nature of the network. As communication link failure is very common in VANETs because of the fast movement of vehicles so quick reservation of packet transmission slots by vehicles is important. In this thesis we propose two new distributed MAC algorithms. One is for WSANs and the other one is for VANETs. We demonstrate using simulations that our algorithms outperform the state-of-the-art algorithms

Dual Auction Mechanism for Transaction Forwarding and Validation in Complex Wireless Blockchain Network

In traditional blockchain networks, transaction fees are only allocated to full nodes (i.e., miners) regardless of the contribution of forwarding behaviors of light nodes. However, the lack of forwarding incentive reduces the willingness of light nodes to relay transactions, especially in the energy-constrained Mobile Ad Hoc Network (MANET). This paper proposes a novel dual auction mechanism to allocate transaction fees for forwarding and validation behaviors in the wireless blockchain network. The dual auction mechanism consists of two auction models: the forwarding auction and the validation auction. In the forwarding auction, forwarding nodes use Generalized First Price (GFP) auction to choose transactions to forward. Besides, forwarding nodes adjust the forwarding probability through a no-regret algorithm to improve efficiency. In the validation auction, full nodes select transactions using Vickrey-Clarke-Grove (VCG) mechanism to construct the block. We prove that the designed dual auction mechanism is Incentive Compatibility (IC), Individual Rationality (IR), and Computational Efficiency (CE). Especially, we derive the upper bound of the social welfare difference between the social optimal auction and our proposed one. Extensive simulation results demonstrate that the proposed dual auction mechanism decreases energy and spectrum resource consumption and effectively improves social welfare without sacrificing the throughput and the security of the wireless blockchain network

When Distributed Consensus Meets Wireless Connected Autonomous Systems: A Review and A DAG-based Approach

The connected and autonomous systems (CAS) and auto-driving era is coming into our life. To support CAS applications such as AI-driven decision-making and blockchain-based smart data management platform, data and message exchange/dissemination is a fundamental element. The distributed message broadcast and forward protocols in CAS, such as vehicular ad hoc networks (VANET), can suffer from significant message loss and uncertain transmission delay, and faulty nodes might disseminate fake messages to confuse the network. Therefore, the consensus mechanism is essential in CAS with distributed structure to guaranteed correct nodes agree on the same parameter and reach consistency. However, due to the wireless nature of CAS, traditional consensus cannot be directly deployed. This article reviews several existing consensus mechanisms, including average/maximum/minimum estimation consensus mechanisms that apply on quantity, Byzantine fault tolerance consensus for request, state machine replication (SMR) and blockchain, as well as their implementations in CAS. To deploy wireless-adapted consensus, we propose a Directed Acyclic Graph (DAG)-based message structure to build a non-equivocation data dissemination protocol for CAS, which has resilience against message loss and unpredictable forwarding latency. Finally, we enhance this protocol by developing a two-dimension DAG-based strategy to achieve partial order for blockchain and total order for the distributed service model SMR

Generalized Adaptive Network Coding Aided Successive Relaying Based Noncoherent Cooperation

A generalized adaptive network coding (GANC) scheme is conceived for a multi-user, multi-relay scenario, where the multiple users transmit independent information streams to a common destination with the aid of multiple relays. The proposed GANC scheme is developed from adaptive network coded cooperation (ANCC), which aims for a high flexibility in order to: 1) allow arbitrary channel coding schemes to serve as the cross-layer network coding regime; 2) provide any arbitrary trade-off between the throughput and reliability by adjusting the ratio of the source nodes and the cooperating relay nodes. Furthermore, we incorporate the proposed GANC scheme in a novel successive relaying aided network (SRAN) in order to recover the typical 50% half-duplex relaying-induced throughput loss. However, it is unrealistic to expect that in addition to carrying out all the relaying functions, the relays could additionally estimate the source-to-relay channels. Hence noncoherent detection is employed in order to obviate the power-hungry channel estimation. Finally, we intrinsically amalgamate our GANC scheme with the joint network-channel coding (JNCC) concept into a powerful three-stage concatenated architecture relying on iterative detection, which is specifically designed for the destination node (DN). The proposed scheme is also capable of adapting to rapidly time-varying network topologies, while relying on energy-efficient detection