Detection of irrigation inhomogeneities in an olive grove using the NDRE vegetation index obtained from UAV images

We have developed a simple photogrammetric method to identify heterogeneous areas of irrigated olive groves and vineyard crops using a commercial multispectral camera mounted on an unmanned aerial vehicle (UAV). By comparing NDVI, GNDVI, SAVI, and NDRE vegetation indices, we find that the latter shows irrigation irregularities in an olive grove not discernible with the other indices. This may render the NDRE as particularly useful to identify growth inhomogeneities in crops. Given the fact that few satellite detectors are sensible in the red-edge (RE) band and none with the spatial resolution offered by UAVs, this finding has the potential of turning UAVs into a local farmer’s favourite aid tool.Peer ReviewedPostprint (published version

Topsoil Moisture Estimation for Precision Agriculture Using Unmanned Aerial Vehicle Multispectral Imagery

There is an increasing trend in crop production management decisions in precision agriculture based on observation of high resolution aerial images from unmanned aerial vehicles (UAV). Nevertheless, there are still limitations in terms of relating the spectral imagery information to the agricultural targets. AggieAir™ is a small, autonomous unmanned aircraft which carries multispectral cameras to capture aerial imagery during pre-programmed flights. AggieAir enables users to gather imagery at greater spatial and temporal resolution than most manned aircraft and satellite sources. The platform has been successfully used in support of a wide variety of water and natural resources management areas. This paper presents results of an on-going research in the application of the imagery from AggieAir in the remote sensing of top soil moisture estimations for a large field served by a center pivot sprinkler irrigation system

Last generation instrument for agriculture multispectral data collection

In recent years, the acquisition and analysis of multispectral data are gaining a growing interest and importance in agriculture. On the other hand, new technologies are opening up for the possibility of developing and implementing sensors with relatively small size and featuring high technical performances. Thanks to low weights and high signal to noise ratios, such sensors can be transported by different type of means (terrestrial as well as aerial vehicles), giving new opportunities for assessment and monitoring of several crops at different growing stages or health conditions. The choice and specialization of individual bands within the electromagnetic spectrum ranging from the ultraviolet to the infrared, plays a fundamental role in the definition of the so-called vegetation indices (eg. NDVI, GNDVI, SAVI, and dozens of others), posing new questions and challenges in their effective implementation. The present paper firstly discusses the needs of low-distance based sensors for indices calculation, then focuses on development of a new multispectral instrument specially developed for agricultural multispectral analysis. Such instrument features high frequency and high resolution imaging through nine different sensors (1 RGB and 8 monochromes with relative band-pass filters, covering the 390 to 950 nm range). The instrument allows synchronized multiband imaging thanks to integrated global shutter technology, with a frame rate up to 5 Hz; exposure time can be as low as 1/5000 s. An applicative case study is eventually reported on an area featuring different materials (organic and non-organic), to show the new instrument potential. Last generation instrument for agriculture multispectral data collection. Available from: https://www.researchgate.net/publication/317596952_Last_generation_instrument_for_agriculture_multispectral_data_collection [accessed Jul 11, 2017]

A Direct Comparison of Remote Sensing Approaches for High-Throughput Phenotyping in Plant Breeding

Remote sensing (RS) of plant canopies permits non-intrusive, high-throughput monitoring of plant physiological characteristics. This study compared three RS approaches using a low flying UAV (unmanned aerial vehicle), with that of proximal sensing, and satellite-based imagery. Two physiological traits were considered, canopy temperature (CT) and a vegetation index (NDVI), to determine the most viable approaches for large scale crop genetic improvement. The UAV-based platform achieves plot-level resolution while measuring several hundred plots in one mission via high-resolution thermal and multispectral imagery measured at altitudes of 30-100 m. The satellite measures multispectral imagery from an altitude of 770 km. Information was compared with proximal measurements using IR thermometers and an NDVI sensor at a distance of 0.5-1m above plots. For robust comparisons, CT and NDVI were assessed on panels of elite cultivars under irrigated and drought conditions, in different thermal regimes, and on un-adapted genetic resources under water deficit. Correlations between airborne data and yield/biomass at maturity were generally higher than equivalent proximal correlations. NDVI was derived from high-resolution satellite imagery for only larger sized plots (8.5 x 2.4 m) due to restricted pixel density. Results support use of UAV-based RS techniques for high-throughput phenotyping for both precision and efficiency

Automatic Identification and Monitoring of Plant Diseases Using Unmanned Aerial Vehicles: A Review

Disease diagnosis is one of the major tasks for increasing food production in agriculture. Although precision agriculture (PA) takes less time and provides a more precise application of agricultural activities, the detection of disease using an Unmanned Aerial System (UAS) is a challenging task. Several Unmanned Aerial Vehicles (UAVs) and sensors have been used for this purpose. The UAVs’ platforms and their peripherals have their own limitations in accurately diagnosing plant diseases. Several types of image processing software are available for vignetting and orthorectification. The training and validation of datasets are important characteristics of data analysis. Currently, different algorithms and architectures of machine learning models are used to classify and detect plant diseases. These models help in image segmentation and feature extractions to interpret results. Researchers also use the values of vegetative indices, such as Normalized Difference Vegetative Index (NDVI), Crop Water Stress Index (CWSI), etc., acquired from different multispectral and hyperspectral sensors to fit into the statistical models to deliver results. There are still various drifts in the automatic detection of plant diseases as imaging sensors are limited by their own spectral bandwidth, resolution, background noise of the image, etc. The future of crop health monitoring using UAVs should include a gimble consisting of multiple sensors, large datasets for training and validation, the development of site-specific irradiance systems, and so on. This review briefly highlights the advantages of automatic detection of plant diseases to the growers

High resolution thermal and multispectral UAV imagery for precision assessment of apple tree response to water stress

UMR AGAP - équipe AFEF - Architecture et fonctionnement des espèces fruitières(Edited by Pablo Gonzalez-de-Santos and Angela Ribeiro)This manuscript presents a comprehensive methodology to obtain Thermal, Visible and Near Infrared ortho-mosaics, as a previous step for the further image-based assessment of response to water stress of an experimental apple tree orchard. Using this methodology, multi-temporal ortho-mosaics of the field plot were created and accuracy of ortho-rectification and geo-location computed. Unmanned aerial vehicle (UAV) flights were performed on an irrigated apple tree orchard located in Southern France. The 6400 m² plot was composed of 520 apple trees which were disposed in 10 rows. In this field set-up, five well irrigated rows alternated with five rows submitted to progressive summer water constraints. For remote image acquisition, on 4th July, 19th July, 1st August and 6th September UAV flights with three cameras onboard (thermal, visible and near infrared) were performed at solar noon. On 1st August, five successive UAV flights were carried out at 8, 10, 12, 14 and 16 h (solar time). By using selfdeveloped software, frames were automatically extracted from the recorded thermal video and turned in the right image format. The temperature of four different targets (hot, cold, wet and dry bare soil) was continuously measured by the IR120 thermoradiometers during each flight, for radiometric calibration purpose. Based each on thirty images, all ortho-mosaics were successfully obtained. As high spatial resolution imagery requires high precision geo-location, and the root mean squared error (RMSE) of each ortho-mosaic positioning was calculated in order to assess its spatial accuracy. RMSE values were less than twice the pixel size in every case, which allowed a precise overlapping of the mosaics created. Canopy temperature data extracted from thermal images for showed significantly higher temperatures in water stressed trees compared to well irrigated, difference being related to severity of water stress. Thanks to the ultrahigh resolution of remote images obtained (<0.1m spatial resolution for thermal infrared images), and beyond its capacity to delineate efficiently each individual tree, the methodology presented here will also make it possible the analysis of intra-canopy variations and the accurate calculation of vegetation and water stress indices

Mehitamata õhusõiduki rakendamine põllukultuuride saagikuse ja maa harimisviiside tuvastamisel

A Thesis for applying for the degree of Doctor of Philosophy in Environmental Protection.Väitekiri filosoofiadoktori kraadi taotlemiseks keskkonnakaitse erialal.This thesis aims to examine how machine learning (ML) technologies have aided significant advancements in image analysis in the area of precision agriculture. These multimodal computing technologies extend the use of machine learning to a broader spectrum of data collecting and selection for the advancement of agricultural practices (Nawar et al., 2017) These techniques will assist complicated cropping systems with more informed decisions with less human intervention, and provide a scalable framework for incorporating expert knowledge of the PA system. (Chlingaryan et al., 2018). Complexity, on the other hand, can be seen as a disadvantage in crop trials, as machine learning models require training/testing databases, limited areas with insignificant sampling sizes, time and space-specificity, and environmental factor interventions, all of which complicate parameter selection and make using a single empirical model for an entire region impractical. During the early stages of writing this thesis, we used a relatively traditional machine learning method to address the regression problem of crop yield and biomass prediction [(i.e., random forest regression (RFR), support vector regression (SVR), and artificial neural network (ANN)] to predicted dry matter (DM) yields of red clover. It obtained favourable results, however, the choosing of hyperparameters, the lengthy algorithms selection process, data cleaning, and redundant collinearity issues significantly limited the way of the machine learning application. We will further discuss the recent trend of automated machine learning (AutoML) that has been driving further significant technological innovation in the application of artificial intelligence from its automated algorithm selection and hyperparameter optimization of the deployable pipeline model for unravelling substance problems. However, a present knowledge gap exists in the integration of machine learning (ML) technology with unmanned aerial systems (UAS) and hyperspectral-based imaging data categorization and regression applications. In this thesis, we explored a state-of-the-art (SOTA) and entirely open-source AutoML framework, Auto-sklearn, which was built on one of the most frequently used machine learning systems, Scikit-learn. It was integrated with two unique AutoML visualization tools to examine the recognition and acceptance of multispectral vegetation indices (VI) data collected from UAS and hyperspectral narrow-band VIs across a varied spectrum of agricultural management practices (AMP). These procedures incorporate soil tillage method (STM), cultivation method (CM), and manure application (MA), and are classified as four-crop combination fields (i.e., red clover-grass mixture, spring wheat, pea-oat mixture, and spring barley). Additionally, they have not been thoroughly evaluated and lack characteristics that are accessible in agriculture remote sensing applications. This thesis further explores the existing gaps in the knowledge base for several critical crop categories and cultivation management methods referring to biomass and yield analysis, as well as to gain a better understanding of the potential for remotely sensed solutions to field-based and multifunctional platforms to meet precision agriculture demands. To overcome these knowledge gaps, this research introduces a rapid, non-destructive, and low-cost framework for field-based biomass and grain yield modelling, as well as the identification of agricultural management practices. The results may aid agronomists and farmers in establishing more accurate agricultural methods and in monitoring environmental conditions more effectively.Doktoritöö eesmärk oli uurida, kuidas masinõppe (MÕ) tehnoloogiad võimaldavad edusamme täppispõllumajanduse valdkonna pildianalüüsis. Multimodaalsed arvutustehnoloogiad laiendavad masinõppe kasutamist põllumajanduses andmete kogumisel ja valimisel (Nawar et al., 2017). Selline täpsemal informatsioonil põhinev tehnoloogia võimaldab keerukate viljelussüsteemide puhul teha otsuseid inimese vähema sekkumisega, ja loob skaleeritava raamistiku täppispõllumajanduse jaoks (Chlingaryan et al., 2018). Põllukultuuride katsete korral on komplekssete masinõppemudelite kasutamine keerukas, sest alad on piiratud ning valimi suurus ei ole piisav; vaja on testandmebaase, kindlaid aja- ja ruumitingimusi ning keskkonnategureid. See komplitseerib parameetrite valikut ning muudab ebapraktiliseks ühe empiirilise mudeli kasutamise terves piirkonnas. Siinse uurimuse algetapis rakendati suhteliselt traditsioonilist masinõppemeetodit, et lahendada saagikuse ja biomassi prognoosimise regressiooniprobleem (otsustusmetsa regression, tugivektori regressioon ja tehisnärvivõrk) punase ristiku prognoositava kuivaine saagikuse suhtes. Saadi sobivaid tulemusi, kuid hüperparameetrite valimine, pikk algoritmide valimisprotsess, andmete puhastamine ja kollineaarsusprobleemid takistasid masinõpet oluliselt. Automatiseeritud masinõppe (AMÕ) uusimate suundumustena rakendatakse tehisintellekti, et lahendada põhiprobleemid automatiseeritud algoritmi valiku ja rakendatava pipeline-mudeli hüperparameetrite optimeerimise abil. Seni napib teadmisi MÕ tehnoloogia integreerimiseks mehitamata õhusõidukite ning hüperspektripõhiste pildiandmete kategoriseerimise ja regressioonirakendustega. Väitekirjas uuriti nüüdisaegset ja avatud lähtekoodiga AMÕ tehnoloogiat Auto-sklearn, mis on ühe enimkasutatava masinõppesüsteemi Scikit-learn edasiarendus. Süsteemiga liideti kaks unikaalset AMÕ visualiseerimisrakendust, et uurida mehitamata õhusõidukiga kogutud andmete multispektraalsete taimkatteindeksite ja hüperspektraalsete kitsaribaandmete taimkatteindeksite tuvastamist ja rakendamist põllumajanduses. Neid võtteid kasutatakse mullaharimisel, kultiveerimisel ja sõnnikuga väetamisel nelja kultuuriga põldudel (punase ristiku rohusegu, suvinisu, herne-kaera segu, suvioder). Neid ei ole põhjalikult hinnatud, samuti ei hõlma need omadusi, mida kasutatatakse põllumajanduses kaugseire rakendustes. Uurimus käsitleb biomassi ja saagikuse seni uurimata analüüsivõimalusi oluliste põllukultuuride ja viljelusmeetodite näitel. Hinnatakse ka kaugseirelahenduste potentsiaali põllupõhiste ja multifunktsionaalsete platvormide kasutamisel täppispõllumajanduses. Uurimus tutvustab kiiret, keskkonna suhtes kahjutut ja mõõduka hinnaga tehnoloogiat põllupõhise biomassi ja teraviljasaagi modelleerimiseks, et leida sobiv viljelusviis. Töö tulemused võimaldavad põllumajandustootjatel ja agronoomidel tõhusamalt valida põllundustehnoloogiaid ning arvestada täpsemalt keskkonnatingimustega.Publication of this thesis is supported by the Estonian University of Life Scieces and by the Doctoral School of Earth Sciences and Ecology created under the auspices of the European Social Fund

Estimation of Evapotranspiration and Energy Fluxes Using a Deep-Learning-Based High-Resolution Emissivity Model and the Two-Source Energy Balance Model with sUAS Information

Surface temperature is necessary for the estimation of energy fluxes and evapotranspiration from satellites and airborne data sources. For example, the Two-Source Energy Balance (TSEB) model uses thermal information to quantify canopy and soil temperatures as well as their respective energy balance components. While surface (also called kinematic) temperature is desirable for energy balance analysis, obtaining this temperature is not straightforward due to a lack of spatially estimated narrowband (sensor-specific) and broadband emissivities of vegetation and soil, further complicated by spectral characteristics of the UAV thermal camera. This study presents an effort to spatially model narrowband and broadband emissivities for a microbolometer thermal camera at UAV information resolution (~0.15 m) based on Landsat and NASA HyTES information using a deep learning (DL) model. The DL model is calibrated using equivalent optical Landsat / UAV spectral information to spatially estimate narrowband emissivity values of vegetation and soil in the 7–14- nm range at UAV resolution. The resulting DL narrowband emissivity values were then used to estimate broadband emissivity based on a developed narrowband-broadband emissivity relationship using the MODIS UCSB Emissivity Library database. The narrowband and broadband emissivities were incorporated into the TSEB model to determine their impact on the estimation of instantaneous energy balance components against ground measurements. The proposed effort was applied to information collected by the Utah State University AggieAir small Unmanned Aerial Systems (sUAS) Program as part of the ARS-USDA GRAPEX Project (Grape Remote sensing Atmospheric Profile and Evapotranspiration eXperiment) over a vineyard located in Lodi, California. A comparison of resulting energy balance component estimates, with and without the inclusion of high-resolution narrowband and broadband emissivities, against eddy covariance (EC) measurements under different scenarios are presented and discussed

Considerations with using unmanned aircraft systems in turfgrass

In recent years, small unmanned aircraft systems (sUAS) and advancements in remote sensing technology have provided alternative and more affordable means for monitoring crop health and stress than ground-based (hand-held or vehicle-mounted) or other aerial-based platforms (manned aircraft or satellites). However, few scientific studies have evaluated the application of sUAS in turfgrass systems. The use of sUAS in monitoring turfgrass requires an understanding of basic remote sensing principles; identifying the target of interest and the various sUAS platforms and sensors that provide the necessary resolution and frequencies to measure and monitor that target; calibration of sensors in the field; and data processing considerations. Those topics are discussed, followed by reviews of recent turfgrass field studies conducted to predict and manage drought stress and pest outbreaks, and improve phenotyping capabilities in turfgrass breeding programs. The use of sUAS remote sensing in turfgrass offers unique possibilities and challenges, which are addressed herein