FLEXIBLE TEG ON THE ANKLE FOR MEASURING THE POWER GENERATED WHILE PERFORMING ACTIVITIES OF DAILY LIVING

In this work, a commercial flexible thermoelectric generator (f-TEG) was used to harvest the body thermal energy during the execution of activities of daily living (ADL). The f-TEG was placed at the level of the ankle, and the performed activities were sitting at the desk and walking. In the first stage of measurements, tests were performed to choose the value of the resistor load that maximizes the power output. Then, while performing ADL, the values of generated power were in the range from 100 to 450 µW. Moreover, while users are walking, the pattern of the output signal of f-TEG is compatible to a sine function with frequency close to that one of human gait. This preliminary result may represent a new way to study the movement of human body to recognize AD

Biosensors in occupational safety and health management : a narrative review

A sensor is a device used to gather information registered by some biological, physical or chemical change, and then convert the information into a measurable signal. The first biosensor prototype was conceived more than a century ago, in 1906, but a properly defined biosensor was only developed later in 1956. Some of them have reached the commercial stage and are routinely used in environmental and agricultural applications, and especially, in clinical laboratory and industrial analysis, mostly because it is an economical, simple and efficient instrument for the in situ detection of the bioavailability of a broad range of environmental pollutants. We propose a narrative review, that found 32 papers and aims to discuss the possible uses of biosensors, focusing on their use in the area of occupational safety and health (OSH)

Biosensors in occupational safety and health management: A narrative review

A sensor is a device used to gather information registered by some biological, physical or chemical change, and then convert the information into a measurable signal. The first biosensor prototype was conceived more than a century ago, in 1906, but a properly defined biosensor was only developed later in 1956. Some of them have reached the commercial stage and are routinely used in environmental and agricultural applications, and especially, in clinical laboratory and industrial analysis, mostly because it is an economical, simple and efficient instrument for the in situ detection of the bioavailability of a broad range of environmental pollutants. We propose a narrative review, that found 32 papers and aims to discuss the possible uses of biosensors, focusing on their use in the area of occupational safety and health (OSH)

A Multi-Source Harvesting System Applied to Sensor-Based Smart Garments for Monitoring Workers’ Bio-Physical Parameters in Harsh Environments

This paper describes the development and characterization of a smart garment for monitoring the environmental and biophysical parameters of the user wearing it; the wearable application is focused on the control to workers’ conditions in dangerous workplaces in order to prevent or reduce the consequences of accidents. The smart jacket includes flexible solar panels, thermoelectric generators and flexible piezoelectric harvesters to scavenge energy from the human body, thus ensuring the energy autonomy of the employed sensors and electronic boards. The hardware and firmware optimization allowed the correct interfacing of the heart rate and SpO2 sensor, accelerometers, temperature and electrochemical gas sensors with a modified Arduino Pro mini board. The latter stores and processes the sensor data and, in the event of abnormal parameters, sends an alarm to a cloud database, allowing company managers to check them via a web app. The characterization of the harvesting subsection has shown that ≈ 265 mW maximum power can be obtained in a real scenario, whereas the power consumption due to the acquisition, processing and BLE data transmission functions determined that a 10 mAh/day charge is required to ensure the device’s proper operation. By charging a 380 mAh Lipo battery in a few hours by means of the harvesting system, an energy autonomy of 23 days was obtained, in the absence of any further energy contribution

Power gain from energy harvesting sources at high MPPT sampling rates

Energy harvesting (EH) sources require the tracking of their maximum power point (MPP) to ensure that maximum energy is captured. This tracking process, performed by an MPP tracker (MPPT), is performed by periodically measuring the EH transducer’s output at a given sampling rate. The harvested power as a function of the sampling parameters has been analyzed in a few works, but the power gain achieved with respect to the case of a much slower sampling rate than the EH source’s frequency has not been assessed so far. In this work, simple expressions are obtained that predict this gain assuming a Thévenin equivalent for the EH transducer. It is shown that the power gain depends on the relationship between the square of AC to DC open circuit voltage of the EH transducer. On the other hand, it is proven that harvested power increases, using a suitable constant signal for the MPP voltage instead of tracking the MPP at a low sampling rate. Experimental results confirmed the theoretical predictions. First, a function generator with a series resistor of 1 k¿ was used, emulating a generic Thévenin equivalent EH. Three waveform types were used (sinus, square, and triangular) with a DC voltage of 2.5 V and AC rms voltage of 0.83 V. A commercial MPPT with a fixed sampling rate of 3 Hz was used and the frequency of the waveforms was changed from 50 mHz to 50 Hz, thus effectively emulating different sampling rates. Experimental power gains of 11.1%, 20.7%, and 7.43% were, respectively, achieved for the sinus, square, and triangular waves, mainly agreeing with the theoretical predicted ones. Then, experimental tests were carried out with a wave energy converter (WEC) embedded into a drifter and attached to a linear shaker, with a sinus excitation frequency of 2 Hz and peak-to-peak amplitude of 0.4 g, in order to emulate the drifter’s movement under a sea environment. The WEC provided a sinus-like waveform. In this case, another commercial MPPT with a sampling period of 16 s was used for generating a slow sampling rate, whereas a custom MPPT with a sampling rate of 60 Hz was used for generating a high sampling rate. A power gain around 20% was achieved in this case, also agreeing with the predicted gain.This work was supported by the European Innovation Council under the EU Horizon 287 Europe program ‐ Grant agreement No 101071179, project SUSTAIN (Smart Building Sensitive to 288 Daily Sentiment)”. “The second author was supported by the European Union – NextGenerationEU 289 and the Ministerio de Universidades – Plan de Recuperación, Transformación y Resiliencia under a 290 Margarita Salas post‐doctoral research fellowship (ref. 2022UPC‐MSC‐94068).Peer ReviewedPostprint (author's final draft

Energy harvesting methods for transmission lines: a comprehensive review

Humanity faces important challenges concerning the optimal use, security, and availability of energy systems, particularly electrical power systems and transmission lines. In this context, data-driven predictive maintenance plans make it possible to increase the safety, stability, reliability, and availability of electrical power systems. In contrast, strategies such as dynamic line rating (DLR) make it possible to optimize the use of power lines. However, these approaches require developing monitoring plans based on acquiring electrical data in real-time using different types of wireless sensors placed in strategic locations. Due to the specific conditions of the transmission lines, e.g., high electric and magnetic fields, this a challenging problem, aggravated by the harsh outdoor environments where power lines are built. Such sensors must also incorporate an energy harvesting (EH) unit that supplies the necessary electronics. Therefore, the EH unit plays a key role, so when designing such electronic systems, care must be taken to select the most suitable EH technology, which is currently evolving rapidly. This work reviews and analyzes the state-of-the-art technology for EH focused on transmission lines, as it is an area with enormous potential for expansion. In addition to recent advances, it also discusses the research needs and challenges that need to be addressed. Despite the importance of this topic, there is still much to investigate, as this area is still in its infancy. Although EH systems for transmission lines are reviewed, many other applications could potentially benefit from introducing wireless sensors with EH capabilities, such as power transformers, distribution switches, or low- and medium-voltage power lines, among others.This research was funded by Ministerio de Ciencia e Innovación de España, grant number PID2020-114240RB-I00 and by the Generalitat de Catalunya, grant number 2017 SGR 967.Peer ReviewedPostprint (author's final draft

Energy Harvesting Technologies for Achieving Self-Powered Wireless Sensor Networks in Machine Condition Monitoring:A Review

Condition monitoring can reduce machine breakdown losses, increase productivity and operation safety, and therefore deliver significant benefits to many industries. The emergence of wireless sensor networks (WSNs) with smart processing ability play an ever-growing role in online condition monitoring of machines. WSNs are cost-effective networking systems for machine condition monitoring. It avoids cable usage and eases system deployment in industry, which leads to significant savings. Powering the nodes is one of the major challenges for a true WSN system, especially when positioned at inaccessible or dangerous locations and in harsh environments. Promising energy harvesting technologies have attracted the attention of engineers because they convert microwatt or milliwatt level power from the environment to implement maintenance-free machine condition monitoring systems with WSNs. The motivation of this review is to investigate the energy sources, stimulate the application of energy harvesting based WSNs, and evaluate the improvement of energy harvesting systems for mechanical condition monitoring. This paper overviews the principles of a number of energy harvesting technologies applicable to industrial machines by investigating the power consumption of WSNs and the potential energy sources in mechanical systems. Many models or prototypes with different features are reviewed, especially in the mechanical field. Energy harvesting technologies are evaluated for further development according to the comparison of their advantages and disadvantages. Finally, a discussion of the challenges and potential future research of energy harvesting systems powering WSNs for machine condition monitoring is made

Preparation and caracterization of thermoelectric materials

This work presents a complete study of thermoelectric materials. It starts with a study of a Solar Concentrator and the development of a Genetic Algorithm and Cross-Entropy for analyzing experimental data. Contains a study on thermoelectric devices, from a new experimental setup. It also counts on the development and manufacture of an entire equipment for measuring thermoelectric materials, both bulks and thin films. It ends with the preparation of a specific thermoelectric material, the MoS2, and the use of all the apparatus previously developed for its study

An Energy-Autonomous Smart Shirt employing wearable sensors for Users’ Safety and Protection in Hazardous Workplaces

none4siWearable devices represent a versatile technology in the IoT paradigm, enabling noninvasive and accurate data collection directly from the human body. This paper describes the development of a smart shirt to monitor working conditions in particularly dangerous workplaces. The wearable device integrates a wide set of sensors to locally acquire the user’s vital signs (e.g., heart rate, blood oxygenation, and temperature) and environmental parameters (e.g., the concentration of dangerous gas species and oxygen level). Electrochemical gas-monitoring modules were designed and integrated into the garment for acquiring the concentrations of CO, O2, CH2O, and H2S. The acquired data are wirelessly sent to a cloud platform (IBM Cloud), where they are displayed, processed, and stored. A mobile application was deployed to gather data from the wearable devices and forward them toward the cloud application, enabling the system to operate in areas where aWiFi hotspot is not available. Additionally, the smart shirt comprises a multisource harvesting section to scavenge energy from light, body heat, and limb movements. Indeed, the wearable device integrates several harvesters (thin-film solar panels, thermoelectric generators (TEGs), and piezoelectric transducers), a low-power conditioning section, and a 380 mAh LiPo battery to accumulate the recovered charge. Field tests indicated that the harvesting section could provide up to 216 mW mean power, fully covering the power requirements (P = 1.86 mW) of the sensing, processing, and communication sections in all considered conditions (3.54 mW in the worst-case scenario). However, the 380 mAh LiPo battery guarantees about a 16-day lifetime in the complete absence of energy contributions from the harvesting section.Special Issue “Innovative Materials, Smart Sensors and IoT-based Electronic Solutions for Wearable Applications”, https://www.mdpi.com/journal/applsci/special_issues/Materials_Sensors_Electronic_Solutions_Wearable_ApplicationsopenRoberto De Fazio, Abdel-Razzak Al-Hinnawi, Massimo De Vittorio, Paolo ViscontiDE FAZIO, Roberto; Al-Hinnawi, Abdel-Razzak; DE VITTORIO, Massimo; Visconti, Paol

Emergent Hybridity, Cyborgs in Architecture

This thesis examines architectural test-beds as an experimental and contemporary mode of creating architecture that realizes the potential of many of the connections and complexities found in living systems. It builds on the lineage of research from the Hylozoic Ground Environments and the notion of the chthonian, embodying the potent, hidden, and essential ingredients of life.1 From the notions of geotextiles and cyborgs, a new conception of architecture is uncovered at the scale of material compositions, wearables, and tensile structures in architecture. After a survey of precedents as well as their concepts, design processes, and cross-disciplinary inputs, the thesis concludes with the design of an interconnected human body that is, an expanded human physiology connecting body, site, and surrounding structure in the form of public space in the alleyways of the North Point Lowlands, Hong Kong. The design departs from the North Point Lowland’s reclaimed and constantly rehabilitating site features to generate a coherent public space. The design proposal utilizes bifurcative qualities found in living matter, solar energy, and physiological processes to inspire a physical structure and its inhabitants. The design proposal is a co-generated physical form arising from a moment of feeling peaceful and emergent while experiencing the hybrid qualities of life in the alleyways of Hong Kong, North Point. 1. Beesley, Philip, Rob Gorbet, Pernilla Ohrstedt, and Hayley Isaacs. “Introduction Liminal Responsive Architecture.” In Hylozoic Ground: Liminal Responsive Architecture, 12-42. Cambridge, Ont. Canada: Riverside Architectural Press, 2010