Operation of a hybrid modular multilevel converter during grid voltage unbalance

The recently proposed parallel hybrid modular multilevel converter is considered to be a low loss, low component count converter with soft switching capability of the ‘main’ H-bridge. The converter has similar advantages to other emerging modular multilevel converter circuits being considered for HVDC power transmission and can be made compact which is desirable for offshore application. However, during ac network unbalance the individual ‘chain-links’ exchange unequal amounts of power with the grid which requires appropriate remedial action. This paper presents research into the performance of the converter and proposes a suitable control method that enables the converter to operate during grid voltage unbalance. The proposed control concept involves the use of asymmetric third harmonic voltage generation in the ‘chain-links’ of the converter to redistribute the power exchanged between the individual ‘chain-links’ and the grid. Mathematical analysis and simulation modelling with results are presented to support the work described

Global Tracking Passivity--based PI Control of Bilinear Systems and its Application to the Boost and Modular Multilevel Converters

This paper deals with the problem of trajectory tracking of a class of bilinear systems with time--varying measurable disturbance. A set of matrices {A,B_i} has been identified, via a linear matrix inequality, for which it is possible to ensure global tracking of (admissible, differentiable) trajectories with a simple linear time--varying PI controller. Instrumental to establish the result is the construction of an output signal with respect to which the incremental model is passive. The result is applied to the boost and the modular multilevel converter for which experimental results are given.Comment: 9 pages, 10 figure

Capacitor Voltage Estimation Scheme with Reduced Number of Sensors for Modular Multilevel Converters

This paper presents a new method to measure the voltage across the submodule (SM) capacitors in a modular multilevel converter (MMC). The proposed technique requires only one voltage sensor per arm. This reduces the number of sensors required compared to conventional sensor-based methods. Therefore, the cost and complexity of the system are reduced, which in turn improves the converter’s overall reliability. The proposed method employs an exponentially weighted recursive least square (ERLS) algorithm to estimate the SM capacitor voltages through the measured total arm voltage and the switching patterns of each SM. There is thus no need for extra sensors to measure these control signals as they are directly provided from the controller. The robustness of the proposed method is confirmed via introducing deviations for the capacitance values, dynamic load changes, DC voltage change and start-up transient condition. Simulation and experimentally validated results based on a single-phase MMC show the effectiveness of the proposed method in both, steady-state and dynamic operations

An Overview of Applications of the Modular Multilevel Matrix Converter

The modular multilevel matrix converter is a relatively new power converter topology suitable for high-power alternating current (AC)-to-AC applications. Several publications in the literature have highlighted the converter capabilities, such as full modularity, fault-redundancy, control flexibility and input/output power quality. However, the topology and control of this converter are relatively complex to realise, considering that the converter has a large number of power-cells and floating capacitors. To the best of the authors’ knowledge, there are no review papers where the applications of the modular multilevel matrix converter are discussed. Hence, this paper aims to provide a comprehensive review of the state-of-the-art of the modular multilevel matrix converter, focusing on implementation issues and applications. Guidelines to dimensioning the key components of this converter are described and compared to other modular multilevel topologies, highlighting the versatility and controllability of the converter in high-power applications. Additionally, the most popular applications for the modular multilevel matrix converter, such as wind turbines, grid connection and motor drives, are discussed based on analyses of simulation and experimental results. Finally, future trends and new opportunities for the use of the modular multilevel matrix converter in high-power AC-to-AC applications are identified.Agencia Nacional de Investigación y Desarrollo/[Fondecyt 11191163]/ANID/ChileAgencia Nacional de Investigación y Desarrollo/[Fondecyt 1180879]/ANID/ChileAgencia Nacional de Investigación y Desarrollo/[Fondecyt 11190852]/ANID/ChileAgencia Nacional de Investigación y Desarrollo/[ANID Basal FB0008]/ANID/ChileAgencia Nacional de Investigación y Desarrollo/[Fondef ID19I10370]/ANID/ChileUniversidad de Santiago/[Dicyt 091813DD]//ChileUCR::Vicerrectoría de Docencia::Ingeniería::Facultad de Ingeniería::Escuela de Ingeniería Eléctric

Management and Protection of High-Voltage Direct Current Systems Based on Modular Multilevel Converters

The electrical grid is undergoing large changes due to the massive integration of renewable energy systems and the electrification of transport and heating sectors. These new resources are typically non-dispatchable and dependent on external factors (e.g., weather, user patterns). These two aspects make the generation and demand less predictable, facilitating a larger power variability. As a consequence, rejecting disturbances and respecting power quality constraints gets more challenging, as small power imbalances can create large frequency deviations with faster transients. In order to deal with these challenges, the energy system needs an upgraded infrastructure and improved control system. In this regard, high-voltage direct current (HVdc) systems can increase the controllability of the power system, facilitating the integration of large renewable energy systems. This thesis contributes to the advancement of the state of the art in HVdc systems, addressing the modeling, control and protection of HVdc systems, adopting modular multilevel converter (MMC) technology, with focus in providing services to ac systems. HVdc system control and protection studies need for an accurate HVdc terminal modeling in largely different time frames. Thus, as a first step, this thesis presents a guideline for the necessary level of deepness of the power electronics modeling with respect to the power system problem under study. Starting from a proper modeling for power system studies, this thesis proposes an HVdc frequency regulation approach, which adapts the power consumption of voltage-dependent loads by means of controlled reactive power injections, that control the voltage in the grid. This solution enables a fast and accurate load power control, able to minimize the frequency swing in asynchronous or embedded HVdc applications. One key challenge of HVdc systems is a proper protection system and particularly dc circuit breaker (CB) design, which necessitates fault current analysis for a large number of grid scenarios and parameters. This thesis applies the knowledge developed in the modeling and control of HVdc systems, to develop a fast and accurate fault current estimation method for MMC-based HVdc system. This method, including the HVdc control, achieved to accurately estimate the fault current peak value and slope with very small computational effort compared to the conventional approach using EMT-simulations. This work is concluded introducing a new protection methodology, that involves the fault blocking capability of MMCs with mixed submodule (SM) structure, without the need for an additional CB. The main focus is the adaption of the MMC topology with reduced number of bipolar SM to achieve similar fault clearing performance as with dc CB and tolerable SM over-voltage

Cascaded- and Modular-Multilevel Converter Laboratory Test System Options: A Review

The increasing importance of cascaded multilevel converters (CMCs), and the sub-category of modular multilevel converters (MMCs), is illustrated by their wide use in high voltage DC connections and in static compensators. Research is being undertaken into the use of these complex pieces of hardware and software for a variety of grid support services, on top of fundamental frequency power injection, requiring improved control for non-traditional duties. To validate these results, small-scale laboratory hardware prototypes are often required. Such systems have been built by many research teams around the globe and are also increasingly commercially available. Few publications go into detail on the construction options for prototype CMCs, and there is a lack of information on both design considerations and lessons learned from the build process, which will hinder research and the best application of these important units. This paper reviews options, gives key examples from leading research teams, and summarizes knowledge gained in the development of test rigs to clarify design considerations when constructing laboratory-scale CMCs.This work was supported in part by The University of Manchester supported by the National Innovation Allowance project ``VSC-HVDC Model Validation and Improvement'' and Dr. Heath's iCASE Ph.D. studentship supported through Engineering and Physical Sciences Research Council (EPSRC) and National Grid, in part by the Imperial College London supported by EPSRC through the HubNet Extension under Grant EP/N030028/1, in part by an iCASE Ph.D. Studentship supported by EPSRC and EDF Energy and the CDT in Future Power Networks under Grant EP/L015471/1, in part by University of New South Wales (UNSW) supported by the Solar Flagships Program through the Education Infrastructure Fund (EIF), in part by the Australian Research Council through the Discovery Early Career Research Award under Grant DECRA_DE170100370, in part by the Basque Government through the project HVDC-LINK3 under Grant ELKARTEK KK-2017/00083, in part by the L2EP research group at the University of Lille supported by the French TSO (RTE), and in part by the Hauts-de-France region of France with the European Regional Development Fund under Grant FEDER 17007725

DC/DC converter for offshore DC collection network

Large wind farms, especially large offshore wind farms, present a challenge for the electrical networks that will provide interconnection of turbines and onward transmission to the onshore power network. High wind farm capacity combined with a move to larger wind turbines will result in a large geographical footprint requiring a substantial sub-sea power network to provide internal interconnection. While advanced HVDC transmission has addressed the issue of long-distance transmission, internal wind farm power networks have seen relatively little innovation. Recent studies have highlighted the potential benefits of DC collection networks. First with appropriate selection of DC voltage, reduced losses can be expected. In addition, the size and weight of the electrical plant may also be reduced through the use of medium- or high-frequency transformers to step up the generator output voltage for connection to a medium-voltage network suitable for wide-area interconnection. However, achieving DC/DC conversion at the required voltage and power levels presents a significant challenge for wind-turbine power electronics.This thesis first proposes a modular DC/DC converter with input-parallel output-series connection, consisting of full-bridge DC/DC modules. A new master-slave control scheme is developed to ensure power sharing under all operating conditions, including during failure of a master module by allowing the status of master module to be reallocated to another healthy module. Secondly, a novel modular DC/DC converter with input-series-input-parallel output-series connection is presented. In addition, a robust control scheme is developed to ensure power sharing between practical modules even where modules have mismatched parameters or when there is a faulted module. Further, the control strategy is able to isolate faulted modules to ensure fault ride-through during internal module faults, whilst maintaining good transient performance. The ISIPOS connection is then applied to a converter with bidirectional power flow capability, realised using dual-active bridge modules.The small- and large-signal analyses of the proposed converters are performed in order to deduce the control structure for the converter input and output stages. Simulation and experimental results demonstrate and validate the proposed converters and associated control schemes.Large wind farms, especially large offshore wind farms, present a challenge for the electrical networks that will provide interconnection of turbines and onward transmission to the onshore power network. High wind farm capacity combined with a move to larger wind turbines will result in a large geographical footprint requiring a substantial sub-sea power network to provide internal interconnection. While advanced HVDC transmission has addressed the issue of long-distance transmission, internal wind farm power networks have seen relatively little innovation. Recent studies have highlighted the potential benefits of DC collection networks. First with appropriate selection of DC voltage, reduced losses can be expected. In addition, the size and weight of the electrical plant may also be reduced through the use of medium- or high-frequency transformers to step up the generator output voltage for connection to a medium-voltage network suitable for wide-area interconnection. However, achieving DC/DC conversion at the required voltage and power levels presents a significant challenge for wind-turbine power electronics.This thesis first proposes a modular DC/DC converter with input-parallel output-series connection, consisting of full-bridge DC/DC modules. A new master-slave control scheme is developed to ensure power sharing under all operating conditions, including during failure of a master module by allowing the status of master module to be reallocated to another healthy module. Secondly, a novel modular DC/DC converter with input-series-input-parallel output-series connection is presented. In addition, a robust control scheme is developed to ensure power sharing between practical modules even where modules have mismatched parameters or when there is a faulted module. Further, the control strategy is able to isolate faulted modules to ensure fault ride-through during internal module faults, whilst maintaining good transient performance. The ISIPOS connection is then applied to a converter with bidirectional power flow capability, realised using dual-active bridge modules.The small- and large-signal analyses of the proposed converters are performed in order to deduce the control structure for the converter input and output stages. Simulation and experimental results demonstrate and validate the proposed converters and associated control schemes

A New MMC Topology Which Decreases the Sub Module Voltage Fluctuations at Lower Switching Frequencies and Improves Converter Efficiency

Modular Multi-level inverters (MMCs) are becoming more common because of their suitability for applications in smart grids and multi-terminal HVDC transmission networks. The comparative study between the two classic topologies of MMC (AC side cascaded and DC side cascaded topologies) indicates some disadvantages which can affect their performance. The sub module voltage ripple and switching losses are one of the main issues and the reason for the appearance of the circulating current is sub module capacitor voltage ripple. Hence, the sub module capacitor needs to be large enough to constrain the voltage ripple when operating at lower switching frequencies. However, this is prohibitively uneconomical for the high voltage applications. There is always a trade off in MMC design between the switching frequency and sub module voltage ripple

The modular multilevel DC converters for MVDC and HVDC applications

A dc structure for an electrical power system is seen to have important advantages over an ac structure for the purpose of renewable energy integration and for expansion of transmission and distribution networks. There is also much interest and strong motivation to interconnect the existing point-to-point dc links to form multi-terminal and multi-voltage dc networks, which can make full use of the benefits of a dc scheme across various voltage levels and also increase the flexibility and ease the integration of both centralized and distributed renewable energy. This thesis investigates both high step-ratio dc-dc conversion to interface dc systems with different voltage levels and low step-ratio dc-dc conversion to interconnect dc systems with similar but not identical voltages (still within the same voltage level). The research work explores the possibility of combining the relatively recent modular multilevel converter (MMC) technology with the classic dc-dc circuits and from this proposes several modular multilevel dc converters, and their associated modulation methods and control schemes to operate them, which inherit the major advantages of both MMC technologies and classic dc-dc circuits. They facilitate low-cost, high-compactness, high-efficiency and high-reliability conversion for the medium voltage level and high voltage level dc network interconnection. For medium voltage level cases, this thesis extends the classic LLC dc-dc circuit by introducing MMC-like stack of sub-modules (SMs) in place of the half-bridge or full-bridge inverter in the original configuration. Two families of resonant modular multilevel dc converters (RMMCs) are proposed covering high step-ratio and low step-ratio conversion respectively. A phase-shift modulation scheme is further proposed for these RMMCs that creates an inherent feature of balancing SM capacitor voltages, provides a high effective operating frequency for reducing system footprint and offers a wide operating range for flexible conversion. For high voltage level cases requiring a high step-ratio conversion, a modular multilevel dc-ac-dc converter based on the single-active-bridge or dual-active-bridge structure is explored. The operating mode developed for this converter employs a near-square-wave ac current in order to decrease both the volt-ampere rating requirement for semiconductor devices and the energy storage requirement for SM capacitors. For low step-ratio cases, a single-stage modular multilevel dc-dc converter based on a buck-boost structure is examined, and an analysis method is created to support the choice of the circulating current frequency for minimum current stresses and reactive power losses. Theoretical analysis of and operating principles for all of these proposed modular multilevel dc converters, together with their associated modulation methods and control schemes, are verified by both time-domain simulation at full-scale and experimental tests on down-scaled prototypes. The results demonstrate that these medium voltage and high voltage dc-dc converters are good candidates for the interconnection of dc links at different voltages and thereby make a contribution to future multi-terminal and multi-voltage dc networks.Open Acces