Cladding mode coupling in highly localized fiber Bragg gratings: modal properties and transmission spectra

The spectral characteristics of a fiber Bragg grating (FBG) with a transversely inhomogeneous refractive index profile, differs con- siderably from that of a transversely uniform one. Transmission spectra of inhomogeneous and asymmetric FBGs that have been inscribed with focused ultrashort pulses with the so-called point-by-point technique are investigated. The cladding mode resonances of such FBGs can span a full octave in the spectrum and are very pronounced (deeper than 20dB). Using a coupled-mode approach, we compute the strength of resonant coupling and find that coupling into cladding modes of higher azimuthal order is very sensitive to the position of the modification in the core. Exploiting these properties allows precise control of such reflections and may lead to many new sensing applications.Comment: Submission to OE, 16 pages, 6 figure

Numerical and Experimental Characterization of Radiation Mode of 45° Tilted Fiber Grating

In this paper, we have numerically and experimentally investigated the radiation mode of 45° tilted fiber grating (45° TFG). By introducing the axial distributions into the volume current method, we have established a three-dimensional theoretical model to analyze spatial distributions of the radiation mode of 45° TFG, and measured the radiation mode spatial distributions in experiment. Both numerical and experimental results show that the radiation mode of 45° TFG exhibits an exponential reduction along the fiber axial direction, and a quasi-Gaussian profile along the radial direction of fiber. Additionally, we have also measured the detailed polarization-dependent azimuthal intensity distributions of radiation modes of both s-and p-polarized core modes. The degree of polarization of radiation mode is around 99.886%, which is independent of the length and the polarization extinction ratio of the grating. Moreover, for the first time, we have experimentally observed a very weak p-polarized component existing in the radiation mode, which has matched well with the simulation results

Theoretical and experimental analysis of excessively tilted fiber gratings

We have theoretically and experimentally investigated the dual-peak feature of tilted fiber gratings with excessively tilted structure (named as Ex-TFGs). We have explained the dual-peak feature by solving eigenvalue equations for TM0m and TE0m of a circular waveguide, in which the TE (transverse electric) and TM (transverse magnetic) core modes are coupled into TE and TM cladding modes, respectively. Meanwhile, in the experiment, we have verified that one of the dual peaks at the shorter wavelength is due to the TM mode coupling whereas the other one at the longer wavelength arises from TE mode coupling when a linearly polarized light launched into the Ex-TFG. We have also investigated the peak separation of TE and TM cladding mode for different surrounding medium refractive indexes (SRI), revealed that the dual peaks separation is decreasing as increasing of SRI, which agrees very well with the theoretical analysis results

Small-period long-period fiber grating with improved refractive index sensitivity and dual-parameter sensing ability

We UV inscribe and characterize a long-period fiber grating with a period of 25 μm. A series of polarization-dependent dual-peak pairs can be seen in the transmission spectrum, even though only the symmetrical refractive index modification is introduced. The fabricated grating exhibits a lower temperature sensitivity compared with standard long-period gratings and an enhanced refractive index sensitivity of ∼312.5 nm?RIU averaged from 1.315 to 1.395, which is more than four-fold higher than standard long-period gratings in this range. The full width at half-maximum of the fabricated grating is only about 0.6 nm, allowing for high-resolution sensing. Moreover, the grating period is so small that the attenuation dip corresponding to a high-order Bragg resonance can also be seen, which can act as a monitor of the unwanted perturbation to realize dual-parameter sensing

Highly efficient free-space fiber coupler with 45° tilted fiber grating to access remotely placed optical fiber sensors

In this work, a 45° tilted fiber grating (TFG) is used as a waveguide coupler for the development of a portable interrogation system to access remotely placed optical fiber sensors. The TFG is directly connected to a remote fiber sensor and serves as a highly efficient light coupler between the portable interrogation unit and the sensor. Variation of strain and temperatures are measured with a standard fiber Bragg grating (FBG) sensor, which serves as a remotely placed optical sensor. A light beam from the interrogation unit is coupled into the TFG by a system of lenses, mirrors and optical collimator and acted as the input of the FBG. Reflected light from the FBG sensor is coupled back to the interrogation unit via the same TFG. The TFG is being used as a receiver and transmitter of light and constituent the key part of the system to connect “light source to the optical sensor” and “optical sensor to detector.” A successful demonstration of the developed system for strain and temperature sensing applications have been presented and discussed. Signal to noise ratio of the reflected light from the sensors was greater than ∼ 40 dB

Slow light with flat or offset band edges in multi-mode fiber with two gratings

We consider mode coupling in multimode optical fibers using either two Bragg gratings or a Bragg grating and a long-period grating. We show that the magnitude of the band edge curvature can be controlled leading to a flat, quartic band-edge or to two band edges at distinct, nonequivalent $k$-values, allowing precise control of slow light propagation.Comment: 6 pages, 3 figure

Low thermal sensitivity grating devices based on ex-45° tilting structure capable of forward-propagating cladding modes coupling

The authors describe a detailed investigation on tilted fiber Bragg grating (TFBG) structures with tilted angles exceeding 45°. In contrast to the backward mode coupling mechanism of Bragg gratings with normal and small tilting structures, the ex-45° TFBGs facilitate the light coupling to the forward-propagating cladding modes. The authors have also theoretically and experimentally examined the mode coupling transition of TFBGs with small, medium, and large tilt angles. In particular, experiments are conducted to investigate the spectra and far-field distribution, as well as temperature, strain, and refractive-index sensitivities of ex-45° devices. It has been revealed that these ex-45° gratings exhibit ultralow thermal sensitivity. As in-fiber devices, they may be superior to conventional Bragg and long-period gratings when the low thermal cross sensitivity is required. © 2006 IEEE

Characterization of infrared surface plasmon resonances generated from a fiber-optical sensor utilizing tilted Bragg gratings

We demonstrate the use of tilted fiber gratings to assist with the generation of infrared surface plasmons on a metal film coating the flat of a D-shaped fiber. The wavelength of the strong (>25 dB) resonance is tunable over similar to 1000 nm by adjusting the polarization state of the light and is highly sensitive to the refractive index of any aqueous medium surrounding the fiber (sensitivity= 3365 nm)

Tilted Fiber Bragg Grating photowritten in microstructured optical fiber for improved refractive index measurement

International audienceWe report what we believe to be the first Tilted short-period Fiber Bragg Grating photowritten in a microstructured optical fiber for refractive index measurement. We investigate the spectral sensitivity of Tilted Fiber Bragg Grating to refractive index liquid inserted into the holes of a multimode microstructured fiber. We measure the wavelength shift of the first four modes experimentally observed when calibrated oils are inserted into the fiber holes, and thus we determine the refractive index resolution for each of these modes. Moreover, a cross comparison between experimental and simulation results of a modal analysis is performed. Two simulation tools are used, respectively based on the localized functions method and on a finite element method. All results are in very good agreement

Advanced tilted fiber gratings and their applications

This thesis presents a detailed numerical analysis, fabrication method and experimental investigation on 45º tilted fiber gratings (45º-TFGs) and excessively tilted fiber gratings (Ex-TFGs), and their applications in fiber laser and sensing systems. The one of the most significant contributions of the work reported in this thesis is that the 45º-TFGs with high polarization extinction ratio (PER) have been fabricated in single mode telecom and polarization maintaining (PM) fibers with spectral response covering three prominent optic communication and central wavelength ranges at 1060nm, 1310nm and 1550nm. The most achieved PERs for the 45º-TFGs are up to and greater than 35-50dB, which have reached and even exceeded many commercial in-fiber polarizers. It has been proposed that the 45º-TFGs of high PER can be used as ideal in-fiber polarizers for a wide range of fiber systems and applications. In addition, in-depth detailed theoretical models and analysis have been developed and systematic experimental evaluation has been conducted producing results in excellent agreement with theoretical modeling. Another important outcome of the research work is the proposal and demonstration of all fiber Lyot filters (AFLFs) implemented by utilizing two (for a single stage type) and more (for multi-stage) 45º-TFGs in PM fiber cavity structure. The detailed theoretical analysis and modelling of such AFLFs have also been carried out giving design guidance for the practical implementation. The unique function advantages of 45º-TFG based AFLFs have been revealed, showing high finesse multi-wavelength transmission of single polarization and wide range of tuneability. The temperature tuning results of AFLFs have shown that the AFLFs have 60 times higher thermal sensitivity than the normal FBGs, thus permitting thermal tuning rate of ~8nm/10ºC. By using an intra-cavity AFLF, an all fiber soliton mode locking laser with almost total suppression of siliton sidebands, single polarization output and single/multi-wavelength switchable operation has been demonstrated. The final significant contribution is the theoretical analysis and experimental verification on the design, fabrication and sensing application of Ex-TFGs. The Ex-TFG sensitivity model to the surrounding medium refractive index (SRI) has been developed for the first time, and the factors that affect the thermal and SRI sensitivity in relation to the wavelength range, tilt angle, and the size of cladding have been investigated. As a practical SRI sensor, an 81º-TFG UV-inscribed in the fiber with small (40μm) cladding radius has shown an SRI sensitivity up to 1180nm/RIU in the index of 1.345 range. Finally, to ensure single polarization detection in such an SRI sensor, a hybrid configuration by UV-inscribing a 45º-TFG and an 81º-TFG closely on the same piece of fiber has been demonstrated as a more advanced SRI sensing system