High performance photonic microwave filters based on a 50GHz optical soliton crystal Kerr micro-comb

We demonstrate a photonic radio frequency (RF) transversal filter based on an integrated optical micro-comb source featuring a record low free spectral range of 49 GHz yielding 80 micro-comb lines across the C-band. This record-high number of taps, or wavelengths for the transversal filter results in significantly increased performance including a QRF factor more than four times higher than previous results. Further, by employing both positive and negative taps, an improved out-of-band rejection of up to 48.9 dB is demonstrated using Gaussian apodization, together with a tunable centre frequency covering the RF spectra range, with a widely tunable 3-dB bandwidth and versatile dynamically adjustable filter shapes. Our experimental results match well with theory, showing that our transversal filter is a competitive solution to implement advanced adaptive RF filters with broad operational bandwidths, high frequency selectivity, high reconfigurability, and potentially reduced cost and footprint. This approach is promising for applications in modern radar and communications systems.Comment: 19 pages, 12 figures, 107 reference

Harnessing optical micro-combs for microwave photonics

In the past decade, optical frequency combs generated by high-Q micro-resonators, or micro-combs, which feature compact device footprints, high energy efficiency, and high-repetition-rates in broad optical bandwidths, have led to a revolution in a wide range of fields including metrology, mode-locked lasers, telecommunications, RF photonics, spectroscopy, sensing, and quantum optics. Among these, an application that has attracted great interest is the use of micro-combs for RF photonics, where they offer enhanced functionalities as well as reduced size and power consumption over other approaches. This article reviews the recent advances in this emerging field. We provide an overview of the main achievements that have been obtained to date, and highlight the strong potential of micro-combs for RF photonics applications. We also discuss some of the open challenges and limitations that need to be met for practical applications.Comment: 32 Pages, 13 Figures, 172 Reference

Development of tunable and miniature microwave filters for modern wireless communications

Due to the increasing demand for new wireless services and applications, the high level of integration and the coexistence of multi-standard (MS) or multi-band operations into a single device are becoming defining trends in designing microwave filters. This has driven considerable technological advances in reconfigurable/tunable and miniaturized filters. More specifically, reconfigurable/tunable filters that tune to different frequency bands instead of classical filter banks have great potential to significantly reduce the system size and complexity; while reducing the filter size becomes essential to achieve the highest degree of integration density in compact and portable wireless devices. In the light of this scenario, the objective of this dissertation is to develop the new design technologies, concepts and filtering configurations for tunable microstrip filters and compact passive microwave filters. To this aim, this dissertation is divided into two main parts. The first part (Part I) focuses on the designs of novel varactor-tuned microstrip filters with advanced performances. In this aspect, new topologies for realizing tunable lowpass and highpass filters are firstly developed. State-of-the-art performances, including wide tuning range, high selectivity with multiple transmission zeros, low insertion loss and compact size for all the tuning states are obtained in both of these filters. Secondly, two novel classes of tunable bandpass filters are presented. One of them is designed based on varactor-loaded parallel-coupled microstrip lines (PCML) and short-circuited stubs, which allows the lower passband edge together with two transmission zeros located around the lower passband skirt to be reconfigured separately. While the other tunable bandpass filter is constructed by the combination of tunable bandpass and lowpass filters, featuring both centre frequency and bandwidth tunabilities, as well as high selectivity with abundant transmission zeros. Furthermore, a new concept of tunable lossy filter is demonstrated, which attempts to achieve an equivalent high-Q tunable performance by using low-Q resonators. This concept makes the presented tunable combline filter interesting for some frequency-agile applications in which the low in-band loss variation and high selectivity are much desired while the absolute insertion loss can be a tradeoff. The second part (Part II) is devoted to the design of miniaturized passive microwave filters with improved characteristics. For this, the concept of artificial right-handed and left-handed transmission lines are applied to the signal interference filtering topology, which results in a compact circuit size and good out-of-band performance. In particular, for a further size reduction, such filter is implemented in the forms of multilayered structure by using liquid crystal polymer (LCP) technology. Additionally, another two types of miniaturized bandpass filters using stepped impedance resonators are demonstrated, which are implemented based on different fabrication processes (i.e. LCP bonded multilayer PCB technology and a standard planar PCB technology). Among their main features, the compact size, wide passband, broad stopband with multiple transmission zeros and circuit simplicity are highlighted. For all the proposed design techniques and filtering structures, exhaustive theoretical analyses are done, and design equations and guide rules are provided. Furthermore, all the proposed schemes and/or ideas have been experimentally validated through the design, implementation and measurement of different filters. The fabrication processes of multilayer technology utilized: liquid crystal polymer (LCP) technology and liquid crystal polymer (LCP) bonded multilayer printed circuit board (PCB) technology, are also demonstrated for reference. All of the results achieved in this dissertation make the proposed filters very attractive for their use in modern wireless communication systems

Development of turnable and miniature microwave filters for modern wireless communication

Due to the increasing demand for new wireless services and applications, the high level of integration and the coexistence of multi-standard (MS) or multi-band operations into a single device are becoming defining trends in designing microwave filters. This has driven considerable technological advances in reconfigurable/tunable and miniaturized filters. More specifically, reconfigurable/tunable filters that tune to different frequency bands instead of classical filter banks have great potential to significantly reduce the system size and complexity; while reducing the filter size becomes essential to achieve the highest degree of integration density in compact and portable wireless devices. In the light of this scenario, the objective of this dissertation is to develop the new design technologies, concepts and filtering configurations for tunable microstrip filters and compact passive microwave filters. To this aim, this dissertation is divided into two main parts. The first part (Part I) focuses on the designs of novel varactor-tuned microstrip filters with advanced performances. In this aspect, new topologies for realizing tunable lowpass and highpass filters are firstly developed. State-of-the-art performances, including wide tuning range, high selectivity with multiple transmission zeros, low insertion loss and compact size for all the tuning states are obtained in both of these filters. Secondly, two novel classes of tunable bandpass filters are presented. One of them is designed based on varactor-loaded parallel-coupled microstrip lines (PCML) and short-circuited stubs, which allows the lower passband edge together with two transmission zeros located around the lower passband skirt to be reconfigured separately. While the other tunable bandpass filter is iii constructed by the combination of tunable bandpass and lowpass filters, featuring both centre frequency and bandwidth tunabilities, as well as high selectivity with abundant transmission zeros. Furthermore, a new concept of tunable lossy filter is demonstrated, which attempts to achieve an equivalent high-Q tunable performance by using low-Q resonators. This concept makes the presented tunable combline filter interesting for some frequency-agile applications in which the low in-band loss variation and high selectivity are much desired while the absolute insertion loss can be a tradeoff. The second part (Part II) is devoted to the design of miniaturized passive microwave filters with improved characteristics. For this, the concept of artificial right-handed and left-handed transmission lines are applied to the signal interference filtering topology, which results in a compact circuit size and good out-of-band performance. In particular, for a further size reduction, such filter is implemented in the forms of multilayered structure by using liquid crystal polymer (LCP) technology. Additionally, another two types of miniaturized bandpass filters using stepped impedance resonators are demonstrated, which are implemented based on different fabrication processes (i.e. LCP bonded multilayer PCB technology and a standard planar PCB technology). Among their main features, the compact size, wide passband, broad stopband with multiple transmission zeros and circuit simplicity are highlighted. For all the proposed design techniques and filtering structures, exhaustive theoretical analyses are done, and design equations and guide rules are provided. Furthermore, all the proposed schemes and/or ideas have been experimentally validated through the design, implementation and measurement of different filters. The fabrication processes of multilayer technology utilized: liquid crystal polymer (LCP) technology and liquid crystal polymer (LCP) bonded multilayer printed circuit board (PCB) technology, are also demonstrated for reference. All of the results achieved in this dissertation make the proposed filters very attractive for their use in modern wireless communication systems.MultiWaves Project (PIRSES-GA-2010-247532) of the Seventh Framework Programme (FP7), European Commission

Substrate Integrated Coaxial Filters with Fixed and Tunable Responses

Wireless and mobile communications are already playing an important role in our lives, and this will can only grow more and more due to the predominant importance and use of modern smartphones, tablets and any kind of connected devices. With this is mind, the spectrum for wireless and mobile communications is becoming incredibly overcrowded, leading to increasing requirements for RF front-end filters. This progress has encouraged an impressive need for developing low-cost, high performance, mass-producible, small footprint, and highly integrated front-end solutions for microwave and millimeter-wave systems and applications including emerging 5G and future wireless platforms. In this context, high quality factor resonators are usually typical basic building blocks of many high performance passive and active circuits, and its design has become even more challenging in the last decade. As a result, Substrate Integrated Waveguide (SIW) technology has attracted scientific community and industry attention as a very good candidate for developing such desired high-Q planar microwave devices. Recently, SIW is demonstrating to be a successful approach for implementing microwave and mm-wave filters with high Q-factor, easy integration with other planar circuits, and for mass-production manufacturing processes in many technologies (i.e. Printed Circuit Board (PCB) and Low Temperature Co-fired Ceramics (LTCC) technologies among them). Its enormous similarity with waveguides is probably one of the main reasons why the development of SIW-based components and circuits is rapidly growing among the research community. Other potential features that, combined with the former advantages, could be of huge interest in a wide range of wireless and mobile applications are a lively set of research subjects, such as compactness, advanced filtering responses, and recently frequency-agility capabilities. These key features have been recently introduced in the design of microwave filters for the next-generation wireless systems. Taking into account the above-mentioned background, the work carried out during the course of this PhD Thesis has been directed towards a further study of SIW technology to propose, analyze and develop an innovative and original resonator topology. The proposed topology is based on the extension of the classical coaxial waveguide resonator to SIW technology, and must take advantage of the characteristics of SIW devices to allow the design of improved and innovative microwave resonator filters for advanced wireless systems. This PhD Thesis includes the latest improvements made on this topic, from the working principles of the basic coaxial SIW block, until different applications for the design of compact quasi-elliptic and reconfigurable microwave filters. The results are promising and demonstrate the validity of the proposed topology for the design of high-Q microwave filters, as well as its potential application to implement complex designs. The general knowledge gained from these cases of study can be considered a good base for further developing this technology, which can help to improve its EM performance, and also contribute to a more general use in the market.Las comunicaciones inalámbricas y móviles juegan un papel importante en nuestras vidas, y esto sólo puede ir a más debido a su enorme importancia y al uso de los modernos teléfonos inteligentes (del inglés, smartphones), tabletas y toda clase de dispositivos inalámbricos. Con todo esto en mente, el espectro electromagnético para comunicaciones inalámbricas y móviles se está saturando cada día más, lo que conlleva un constante aumento de los requisitos para los filtros de radio-frecuencia usados en las cabeceras de dichos sistemas. Este progreso ha llevado a un creciente interés en desarrollar componentes de microondas de bajo coste, alto rendimiento, pequeño tamaño, que permitan implementar soluciones altamente integradas para sistemas de alta frecuencia (i.e. microondas y ondas milimétrica) y sus aplicaciones, incluyendo entre ellas la emergente conexión 5G y las futuras plataformas inalámbricas. En este contexto, los resonadores de elevado factor de calidad constituyen generalmente los bloques básicos para el diseño de muchos circuitos pasivos (entre ellos filtros) y activos de alto rendimiento. Su diseño se ha convertido por tanto en un reto aún mayor en la última década. Como resultado de ello, la tecnología de guía de ondas integradas en substrato (Substrate Integrated Waveguide, SIW) ha atraído la atención de la comunidad científica e industrial, al revelarse como una buena aproximación para el desarrollo de dispositivos planares de microondas con excelentes prestaciones eléctricas, y en particular para la implementación de filtros de microondas y onda milimétrica de bajas pérdidas y elevada integración con circuitos en tecnología planar. Además, su flexibilidad se caracteriza también por su adecuación a diferentes procesos de fabricación y producción en masa, en tecnologías tales como los circuitos impresos (Printed Circuit Board, PCB) o la tecnología de materiales cerámicos multi-capa co-sinterizados a baja temperatura (Low Temperature Co-fired Ceramics, LTCC) entre otras. Su enorme similitud con las ya largamente estudiadas guías de onda es, probablemente, una de las principales razones por las cuales el desarrollo de dicho circuitos está creciendo rápidamente entre la comunidad de investigadores. Cabe mencionar como, además de las anteriores ventajas, otras características de la tecnología SIW que podrían ser de gran interés en una amplia gama de aplicaciones inalámbricas y móviles son la miniaturización, la posibilidad de implementar respuestas avanzadas de filtrado y, recientemente, las capacidades de sintonía en frecuencia de los componentes de microondas. De este modo, el trabajo desarrollado a lo largo de esta Tesis Doctoral se ha orientado hacia el planteamiento, análisis y desarrollo de una topología de resonador innovadora y original. Dicha topología se basa en una extensión de las cavidades coaxiales en guía de onda metálica a una implementación integrada en substrato inspirada en la tecnología SIW. Esta Tesis Doctoral recapitula los últimos avances que se han producido sobre este tema, empezando desde la descripción de los principios fundamentales de funcionamiento de las estructuras, hasta la demostración de varias aplicaciones concretas útiles para el diseño de filtros de microondas muy compactos, con respuestas filtrantes avanzadas y reconfigurables. Los resultados que se van a mostrar a continuación son prometedores, y demuestran la validez de la topología propuesta. El conocimiento general obtenido de los diferentes prototipos fabricados y caracterizados experimentalmente puede considerarse una buena base para seguir desarrollando esta tecnología, lo que puede ayudar a mejorar su rendimiento electromagnético, así como a contribuir a un uso más extendido de estos dispositivos en el mercado.Les comunicacions sense fils i mòbils juguen un paper important en les nostres vides, i això només pot anar a més a causa de la gran importància i l'ús dels moderns telèfons intel·ligents (de l'anglès, smartphones), tablets i tota classe de dispositius sense fil. Tenint en compte tot açò, l'espectre electromagnètic per a comunicacions sense fils i mòbils s'està saturant cada dia més, el que comporta un constant augment dels requisits per als filtres de radiofreqüència usats en les capçaleres d'aquests sistemes. Aquest progrés ha portat a un creixent interès en desenvolupar components de microones de baix cost, alt rendiment, volum reduït, que permeten implementar solucions altament integrades per a sistemes d'alta freqüència (ie. microones i ones mil·limètriques) i les seves aplicacions, incloent l'emergent connexió 5G i les futures plataformes sense fils. En aquest context, els ressonadors d'elevat factor de qualitat constitueixen generalment els blocs bàsics per al disseny de molts circuits passius (entre ells filtres) i actius d'alt rendiment. El seu disseny s'ha convertit per tant en un repte encara més gran en l'última dècada. Com a resultat d'això, la tecnologia de guia d'ones integrades en substrat (Substrate Integrated Waveguide, SIW) ha atret l'atenció de la comunitat científica i industrial, al revelar-se com una bona aproximació per al desenvolupament de dispositius planars de microones amb excel·lents prestacions elèctriques , i en particular per a la implementació de filtres de microones i ones mil·limètriques de baixes pèrdues i elevada integració amb circuits en tecnologia planar. A més, la seua flexibilitat es caracteritza també per la seua adequació a diferents processos de fabricació i producció en massa, en tecnologies com ara els circuits impresos (Printed Circuit Board, PCB) o la tecnologia de materials ceràmics multicapa co-sinteritzats a baixa temperatura (Low Temperature Co-Fired Ceramics, LTCC) entre d'altres. La seua enorme similitud amb les ja llargament estudiades guies d'ona és, probablement, una de les principals raons per les quals el desenvolupament d'aquests circuits està creixent ràpidament entre la comunitat d'investigadors. Cal destacar com, a més de les anteriors avantatges, altres característiques de la tecnologia SIW que podrien ser de gran interès en una àmplia gamma d'aplicacions sense fils i mòbils són la miniaturització, la possibilitat d'implementar respostes avançades de filtrat i, recentment, les capacitats de sintonia en freqüència dels components de microones. Aquestes característiques clau s'han introduït recentment en el disseny de filtres microones per als sistemes sense fils de pròxima generació, convertint-se en objecte prioritari d'estudi per part de la comunitat científica. D'aquesta manera, el treball desenvolupat al llarg d'aquesta tesi doctoral s'ha orientat cap al plantejament, anàlisi i desenvolupament d'una topologia de ressonador innovadora i original. Aquesta topologia es basa en una extensió de les cavitats coaxials en guia d'ona metàl·lica a una implementació integrada a substrat inspirada en la tecnologia SIW. Aquesta tesi doctoral recapitula els últims avanços que s'han produït sobre aquest tema, començant des de la descripció dels principis fonamentals de funcionament de les estructures, fins a la demostració de diverses aplicacions concretes útils per al disseny de filtres i microones molt compactes, amb respostes de filtrat avançades i reconfigurables. Els resultats que es mostraran a continuació són prometedors, i demostren la validesa de la topologia proposada. El coneixement general obtingut dels diferents prototips fabricats i caracteritzats experimentalment es pot considerar com una bona base per seguir desenvolupant aquesta tecnologia, el que pot ajudar a millorar el seu rendiment electromagnètic, així com a contribuir a un ús més estès d'aquests dispositius en el merSirci, S. (2017). Substrate Integrated Coaxial Filters with Fixed and Tunable Responses [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/78838TESI

Planar microwave filters with electronically tunability and other novel configurations

In order to meet the increasing demands of advance wireless communications and radar systems, several novel types of bandpass filters and bandstop filters have been developed in this thesis. A new type of varactor-tuned dual-mode bandpass filters have been presented to achieve a nearly constant absolute bandwidth over a wide tuning range by using a single DC bias circuit. Since the two operating modes (i.e., the odd and even modes) in a dualmode microstrip open-loop resonator do not couple to each other, tuning the passband frequency is accomplished by merely changing the two modal frequencies proportionally. Design equations and procedures are derived, and two two-pole tunable bandpass filters and a four-pole tunable bandpass filter of this type are demonstrated experimentally. Miniature microstrip doublet dual-mode filters that exhibit quasi-elliptic function response without using any cross coupling have been developed. It shows that a single two-pole filter or the doublet can produce two transmission zeros resulting from a double behaviour of the dual-mode resonator of this type. Electromagnetic (EM) simulation and experiment results of the proposed filters are described. Parallel feed configuration of a microstrip quasi-elliptic function bandpass filter has been built with a pair of open-loop dual-mode resonators. By employing this new coupling scheme, a novel filter topology with three-pole quasi-elliptic function frequency response can be obtained, leading to good passband performance, such as low insertion loss and good matching at the mid-band of passband. A designed three-pole bandpass filter of this type is demonstrated experimentally. A new class of dual-band filters based on non-degenerate dual-mode microstrip slow-wave open-loop resonators, which support two non-degenerate modes that do not couple, have been introduced. Different feed schemes that affect the filtering characteristics are investigated. Examples of dual-band filters of this type are described with simulation and experiment results. iii In order to achieve a wide spurious-free upper passband, a novel design of bandstop filter with cancellation of first spurious mode by using coupled three-section step impedance resonators (SIRs) has been developed. This cancellation occurs when two transmission poles coincide with the first spurious mode (transmission zero) by properly choosing the step impedance ratio and the gap between the SIR and the main transmission line. A stripline bandstop filter and a microstrip bandstop filter of this type are designed, fabricated and tested. As a preliminary investigation, the microstrip filter is tuned electronically using ferroelectric thin film varactors

Tunable microwave filters using ferroelectric thin films

Frequency agile microwave devices based on Barium Strontium Titanate (BST) thin films have gained a lot of interest in recent years. The frequency agility of the ferroelectric devices is based on the external DC electric field controlled permittivity of BST thin film. In this research work, several tunable microwave filters incorporating BST thin film varactors operating in a frequency range between 1 GHz and 25 GHz are designed, tested and analysed. A lumped element lowpass filter incorporating integrated meander line inductors and BST parallel plate capacitors is implemented on a high resistivity silicon substrate and demonstrates 32.1 % tuning of the cut-off frequency at 15 V. A combline bandpass filter employing integrated BST parallel plate varactors as tuning elements is implemented on a MgO substrate and shows a reasonable tuning from about 8 GHz to 12 GHz with 10 V bias of only one resonator. Two pole and four pole coupled resonator bandpass filters with discrete BST or GaAs varactors as tuning elements are implemented in a frequency range of 1 - 3 GHz. The filters based on BST parallel plate capacitors show an insertion loss in line with the GaAs filters, which is also the lowest insertion loss of BST filters ever reported. Future work on improving the BST film and metal film loss at tens of gigahertz range is also discussed

Miniaturised bandpass filters for wireless communications

The wireless industry has seen exceptional development over the past few decades due to years of sustained military and commercial enterprise. While the electromagnetic spectrum is becoming increasingly congested, there is a growing tendency to strive for higher bandwidths, faster throughputs, greater versatility, compatibility and interoperability in current and emerging wireless technologies. Consequently, an increasingly stringent specification is imposed upon the frequency utilization of wireless devices. New challenges are constantly being discovered in the development and realization of RF and microwave filters, which have not only sustained but fuelled microwave filter research over the many years. These developments have encouraged new solutions and techniques for the realization of compact, low loss, highly selective RF and microwave bandpass filters. The theme of this dissertation is the realization of planar compact performance microwave and RF bandpass filters for wireless communication systems. The work may be broadly categorised into three sections as follows. The first section presents a novel compact planar dual-mode resonator with several interesting and attractive features. Generally, planar microwave dual-mode resonators are known to half the filter footprint. However, it is found that the proposed resonator is capable of achieving further size reductions. In addition the resonator inherently possesses a relatively wide stopband as the lowest spurious harmonic resonance is observed at thrice the fundamental frequency. Properties of this resonator, such as these and more are explored in depth to arrive at an accurate electrical equivalent circuit, which is used as the basis for high order filter design. The application of these resonators in the design of bandpass filters is the subject of the second section. A general filter design procedure based on the equivalent circuit is presented to assist the design of all-pole filters. Alternatively, it is shown that generalised Chebyshev filters with enhanced selectivity may be developed with cross coupled resonator topologies. The discussions are supplemented with detailed design examples which are accompanied by theoretical, simulated and experimental results in order to illustrate the filter development process and showcase practical filter performance. The third section explores the possibility of employing these resonators in the development of frequency tunable bandpass filters. Preference is given to varactor diodes as the tuning element due to the numerous qualities of this device in contrast to other schemes. In particular, interest is paid to center frequency tuned filters with constant bandwidth. Tunable filters constructed with the dual-mode resonator are shown to have a relatively wide tuning range as well as significantly higher linearity in comparison to similar published works. In line with the previous section, experimental verification is presented to support and supplement the discussions

Miniaturised and reconfigurable planar filters for ultra-wideband applications

An increasing demand for electromagnetic spectrum has resulted from the emergence of feature-rich and faster throughputs wireless applications. This necessitates the developments of dynamic reconfigurable or multifunctional systems to better exploit the existing spectrum. Future wireless devices will be expected to communicate over several bands with various other devices in order to fine tune the services they provide to the user. Each band may require a separate RF transceiver and such modern wireless multi-band multi-mode communication systems call for high performance, highly integrated compact modules. Since the Federal Communications Commission (FCC) released the unlicensed frequency band 3.1-10.6 GHz for ultra-wideband (UWB) commercial communications, the development race for commercialising UWB technology has seen a dramatic increase around the world. The aim of this research is to develop reconfigurable planar microwave filters for ultrawideband applications. The project investigates some key design issues of reconfigurable filters, which are being observed constantly in the latest development and realisation of microwave filters. Both analytical and numerical methods are performed to construct a realistic and functional design. Two different types of frequency reconfigurability are investigated in this thesis: discrete (e.g. PIN diode, Optical switch) and continuous (e.g. varactor diode). Using the equivalent circuits and considering the direct coupled filter structure in most cases, several topologies with attractive features are developed for future communication systems. The proposed works may be broadly categorised into three sections as follows. The first section explores a square ring shape close loop resonator along with an opencircuited stub in the symmetry plane. To realise a reconfigurable frequency states within the same spectrum, an innovative approach is developed for this case. An optical or photoconductive switch, comprised of a silicon die activated using near infrared light is investigated as a substitute of PIN diode and performances are evaluated to compare the feasibilities. In addition, a in-band interference rejection technique via externally coupled Tshape resonator is shown. However, it is observed that both structures achieve significant size reductions by utilising the inner part of the resonators. To improve the filter selectivity, a convenient design approach generating a pair of transmission zeros between both passband edges and a single zero in the stop band for harmonic suppression is discussed in the second section. Moreover, the development of notched rejection bands are studied and several novel methods to create a single and multiple notched bands employing the square ring shape structure are proposed. On inspection, it is found that the notch structure can be implemented without deteriorating the filter performances. The discussions are supplemented with detailed design examples which are accompanied by theoretical, simulated and experimental results in order to illustrate the filter development process and showcase practical filter performance. The third section reveals a novel highly compact planar dual-mode resonator with sharp rejections characteristics for UWB applications. A bandwidth reconfiguring technique is demonstrated by splitting its even-mode resonance. Filter structure with the dual-mode resonator is shown to have a relatively wide tuning range, significantly low insertion loss and a constant selectivity along with frequency variations in comparison to similar published works. Finally, the earlier dual-mode structure are modified to realise a dual wideband behaviour. A detail analysis with comprehensive design procedures is outlined and a solution for controlling the frequency bandwidths independently according to the application interest is provided. In line with the previous section, experimental verification is presented to support and supplement the discussions