Low power predictable memory and processing architectures

Great demand in power optimized devices shows promising economic potential and draws lots of attention in industry and research area. Due to the continuously shrinking CMOS process, not only dynamic power but also static power has emerged as a big concern in power reduction. Other than power optimization, average-case power estimation is quite significant for power budget allocation but also challenging in terms of time and effort. In this thesis, we will introduce a methodology to support modular quantitative analysis in order to estimate average power of circuits, on the basis of two concepts named Random Bag Preserving and Linear Compositionality. It can shorten simulation time and sustain high accuracy, resulting in increasing the feasibility of power estimation of big systems. For power saving, firstly, we take advantages of the low power characteristic of adiabatic logic and asynchronous logic to achieve ultra-low dynamic and static power. We will propose two memory cells, which could run in adiabatic and non-adiabatic mode. About 90% dynamic power can be saved in adiabatic mode when compared to other up-to-date designs. About 90% leakage power is saved. Secondly, a novel logic, named Asynchronous Charge Sharing Logic (ACSL), will be introduced. The realization of completion detection is simplified considerably. Not just the power reduction improvement, ACSL brings another promising feature in average power estimation called data-independency where this characteristic would make power estimation effortless and be meaningful for modular quantitative average case analysis. Finally, a new asynchronous Arithmetic Logic Unit (ALU) with a ripple carry adder implemented using the logically reversible/bidirectional characteristic exhibiting ultra-low power dissipation with sub-threshold region operating point will be presented. The proposed adder is able to operate multi-functionally

Adiabatic Circuits for Power-Constrained Cryptographic Computations

This thesis tackles the need for ultra-low power operation in power-constrained cryptographic computations. An example of such an application could be smartcards. One of the techniques which has proven to have the potential of rendering ultra-low power operation is ‘Adiabatic Logic Technique’. However, the adiabatic circuits has associated challenges due to high energy dissipation of the Power-Clock Generator (PCG) and complexity of the multi-phase power-clocking scheme. Energy efficiency of the adiabatic system is often degraded due to the high energy dissipation of the PCG. In this thesis, nstep charging strategy using tank capacitors is considered for the power-clock generation and several design rules and trade-offs between the circuit complexity and energy efficiency of the PCG using n-step charging circuits have been proposed. Since pipelining is inherent in adiabatic logic design, careful selection of architecture is essential, as otherwise overhead in terms of area and energy due to synchronization buffers is induced specifically, in the case of adiabatic designs using 4-phase power-clocking scheme. Several architectures for the Montgomery multiplier using adiabatic logic technique are implemented and compared. An architecture which constitutes an appropriate trade-off between energy efficiency and throughput is proposed along with its methodology. Also, a strategy to reduce the overhead due to synchronization buffers is proposed. A modification in the Montgomery multiplication algorithm is proposed. Furthermore, a problem due to the application of power-clock gating in cascade stages of adiabatic logic is identified. The problem degrades the energy savings that would otherwise be obtained by the application of power-clock gating. A solution to this problem is proposed. Cryptographic implementations also present an obvious target for Power Analysis Attacks (PAA). There are several existing secure adiabatic logic designs which are proposed as a countermeasure against PAA. Shortcomings of the existing logic designs are identified, and two novel secure adiabatic logic designs are proposed as the countermeasures against PAA and improvement over the existing logic designs

Phase Noise Analyses and Measurements in the Hybrid Memristor-CMOS Phase-Locked Loop Design and Devices Beyond Bulk CMOS

Phase-locked loop (PLLs) has been widely used in analog or mixed-signal integrated circuits. Since there is an increasing market for low noise and high speed devices, PLLs are being employed in communications. In this dissertation, we investigated phase noise, tuning range, jitter, and power performances in different architectures of PLL designs. More energy efficient devices such as memristor, graphene, transition metal di-chalcogenide (TMDC) materials and their respective transistors are introduced in the design phase-locked loop. Subsequently, we modeled phase noise of a CMOS phase-locked loop from the superposition of noises from its building blocks which comprises of a voltage-controlled oscillator, loop filter, frequency divider, phase-frequency detector, and the auxiliary input reference clock. Similarly, a linear time-invariant model that has additive noise sources in frequency domain is used to analyze the phase noise. The modeled phase noise results are further compared with the corresponding phase-locked loop designs in different n-well CMOS processes. With the scaling of CMOS technology and the increase of the electrical field, the problem of short channel effects (SCE) has become dominant, which causes decay in subthreshold slope (SS) and positive and negative shifts in the threshold voltages of nMOS and pMOS transistors, respectively. Various devices are proposed to continue extending Moore\u27s law and the roadmap in semiconductor industry. We employed tunnel field effect transistor owing to its better performance in terms of SS, leakage current, power consumption etc. Applying an appropriate bias voltage to the gate-source region of TFET causes the valence band to align with the conduction band and injecting the charge carriers. Similarly, under reverse bias, the two bands are misaligned and there is no injection of carriers. We implemented graphene TFET and MoS2 in PLL design and the results show improvements in phase noise, jitter, tuning range, and frequency of operation. In addition, the power consumption is greatly reduced due to the low supply voltage of tunnel field effect transistor

Recent Development of Hybrid Renewable Energy Systems

Abstract: The use of renewable energies continues to increase. However, the energy obtained from renewable resources is variable over time. The amount of energy produced from the renewable energy sources (RES) over time depends on the meteorological conditions of the region chosen, the season, the relief, etc. So, variable power and nonguaranteed energy produced by renewable sources implies intermittence of the grid. The key lies in supply sources integrated to a hybrid system (HS)

Large space structures and systems in the space station era: A bibliography with indexes (supplement 05)

Bibliographies and abstracts are listed for 1363 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1991 and July 31, 1992. Topics covered include technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion and solar power satellite systems

Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences

References, Appendices & All Parts Merged

Includes: Appendix MA: Selected Mathematical Formulas; Appendix CA: Selected Physical Constants; References; EGP merged file (all parts, appendices, and references)https://commons.library.stonybrook.edu/egp/1007/thumbnail.jp

Design Development Test and Evaluation (DDT and E) Considerations for Safe and Reliable Human Rated Spacecraft Systems

A team directed by the NASA Engineering and Safety Center (NESC) collected methodologies for how best to develop safe and reliable human rated systems and how to identify the drivers that provide the basis for assessing safety and reliability. The team also identified techniques, methodologies, and best practices to assure that NASA can develop safe and reliable human rated systems. The results are drawn from a wide variety of resources, from experts involved with the space program since its inception to the best-practices espoused in contemporary engineering doctrine. This report focuses on safety and reliability considerations and does not duplicate or update any existing references. Neither does it intend to replace existing standards and policy