Understanding consumer demand for new transport technologies and services, and implications for the future of mobility

The transport sector is witnessing unprecedented levels of disruption. Privately owned cars that operate on internal combustion engines have been the dominant modes of passenger transport for much of the last century. However, recent advances in transport technologies and services, such as the development of autonomous vehicles, the emergence of shared mobility services, and the commercialization of alternative fuel vehicle technologies, promise to revolutionise how humans travel. The implications are profound: some have predicted the end of private car dependent Western societies, others have portended greater suburbanization than has ever been observed before. If transport systems are to fulfil current and future needs of different subpopulations, and satisfy short and long-term societal objectives, it is imperative that we comprehend the many factors that shape individual behaviour. This chapter introduces the technologies and services most likely to disrupt prevailing practices in the transport sector. We review past studies that have examined current and future demand for these new technologies and services, and their likely short and long-term impacts on extant mobility patterns. We conclude with a summary of what these new technologies and services might mean for the future of mobility.Comment: 15 pages, 0 figures, book chapte

Survey on Additive Manufacturing, Cloud 3D Printing and Services

Cloud Manufacturing (CM) is the concept of using manufacturing resources in a service oriented way over the Internet. Recent developments in Additive Manufacturing (AM) are making it possible to utilise resources ad-hoc as replacement for traditional manufacturing resources in case of spontaneous problems in the established manufacturing processes. In order to be of use in these scenarios the AM resources must adhere to a strict principle of transparency and service composition in adherence to the Cloud Computing (CC) paradigm. With this review we provide an overview over CM, AM and relevant domains as well as present the historical development of scientific research in these fields, starting from 2002. Part of this work is also a meta-review on the domain to further detail its development and structure

A comparison of processing techniques for producing prototype injection moulding inserts.

This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM. PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer. The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used. The parts produced from the three processing methods are investigated and their respective merits and issues are discussed

Reducing risk in pre-production investigations through undergraduate engineering projects.

This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level. The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor. The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits. The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process

Use of creative tools, technologies, processes and practices in the sectors of Art, Media, and Architecture: State-of the-Art and desired future scenarios

The aim of the paper is to analyse and present the preliminary findings of the EU FP7 funded CRe-AM project for the Art, Media, and Architecture sectors. This project bridges communities of technology providers and innovators with the creative industries, with the aim to build sector-specific dynamic roadmaps for the future of the European creative industries by examining the current state-of-the-art tools, technologies, processes, and practices supporting the creative process against the future scenarios envisioned by stakeholders in these sectors.This work was carried out as part of CRe-AM project, which is supported by European Commission (grant agreement n°612451)

Adoption of additive manufacturing technology: drivers, barriers and impacts on upstream supply chain design

Purpose – This paper investigates how the adoption of additive manufacturing (AM) impacts upstream supply chain (SC) design and considers the influence of drivers and barriers towards the adoption. Design/methodology/approach – Ten case studies investigating AM adoption by Original Equipment Manufacturers (OEMs) in five industries were conducted. This research is driven by a literature-based framework, and the results are discussed according to the theory of transaction cost economics (TCE). Findings – The case studies reveal four patterns of AM adoption that affect upstream SC design (due to changes in supply base or types of buyer–supplier relationships): make, buy, make and buy and vertical integration. A make or buy decision is based on the level of experience with the technology, on the AM application (rapid manufacturing, prototyping or tooling) and on the need of control over production. Other barriers playing a role in the decision are the high initial investments and the lack of skills and knowledge. Originality/value – This paper shows how different decisions regarding AM adoption result in different SC designs, with a specific focus on the upstream SC and changes in the supply base. This research is among the first to provide empirical evidence on the impact of AM adoption on upstream SCs and to identify drivers of the make or buy decision when adopting AM through the theoretical lens of TC

Does Blockchain for 3D Printing Offer Opportunities for Business Model Innovation?

Blockchain combined with 3D printing offers businesses untapped opportunities. Blockchain can help businesses overcome intellectual property and data security barriers, allowing them to take advantage of emerging 3D printing business models. Specifically, blockchain can facilitate local manufacturing and may lay the groundwork for new business models like industrial design marketplaces and shared factories. Businesses could also improve their value proposition by offering additional services around a printed part, improving value delivery, and offering less costly and more customized products that involve fewer risks. Blockchain could transform the way firms create, deliver, and capture value in 3D printing ecosystems.Chander Velu would like to acknowledge funding from the Engineering and Physical Sciences Research Council (EP/R024367/1 and EP/K039598/1

Economic Implications of Additive Manufacturing and the Contribution of MIS

This is the author accepted manuscript. The final version is available from Springer at http://link.springer.com/article/10.1007%2Fs12599-015-0374-4

Creating a Communication Network in Additive Manufacturing

Additive manufacturing (AM) is a relatively new processing technique that has grown exponentially over the past decade. As its potential in the medical community becomes more realized, there is an increasing effort between researchers and institutions to communicate efforts and partnerships. Our sponsor, Dr. Ivo Dobrev from the Universitätsspital Zürich’s otorhinolaryngology clinic, wishes to expand the department’s research to encompass AM, and therefore our team set out to create a social network of institutions providing AM resources for the benefit of future projects at the hospital. We interviewed and researched AM companies to provide a meaningful database of resources, and subsequently created an interactive application as an easy and concise reference for the future