Optical pulse processing towards Tb/s high-speed photonic systems

Due to the continued growth of high-bandwidth services provided by the internet, there is a requirement to operate individual line rates in excess of 100 Gb/s in next generation optical communications systems. Thus, to implement these high-speed optical networks all-optical processing techniques are necessary for pulse shaping and pulse routing. Two sub-systems (pulse generation and wavelength conversion), which exploit optical processing techniques are explored within this thesis. Future systems will require high-quality pulse sources and this thesis develops the pulse generation technique of gain switching to provide simple and cost efficient pulse sources. The poor pulse quality typically associated with gain switching is enhanced by developing all-optical methods. The main attribute of the first pulse generation scheme presented is its wavelength tunability over 50 nm. The novelty of the second scheme lies in the ability to design a grating which has a nonlinear chirp profile exactly opposite to the gain-switched pulses. This grating used in conjunction with the gain-switched laser generates transform limited pulses suitable for 80 Gb/s systems. Furthermore the use of a vertical microcavity-based saturable absorber to suppress detrimental temporal pulse pedestals of a pulse source is investigated. Next generation networks will require routing of data in the optical domain, which can be accomplished by high-speed all-optical wavelength converters. A semiconductor optical amplifier (SOA) is an ideal device to carry out wavelength conversion. In this thesis pulses following propagation through an SOA are experimentally characterised to examine the temporal and spectral dynamics due to the nonlinear response of the SOA. High-speed wavelength conversion is presented using SOA-based shifted filtering. For the first time 80 Gb/s error-free performance was obtained using cross phase modulation in conjunction with blue spectral shifted filtering. In addition an important attribute of this work experimentally examines the temporal profile and phase of the SOA-based shifted filtering wavelength converted signals. Thus the contribution and effect of ultrafast carrier dynamics associated with SOAs is presented

Generation and optimisation of picosecond optical pulses for use in broadband communication systems

The continued growth of the internet driven by the demand for media rich content and escalating IP traffic has been fuelling the massive growth in demand for bandwidth to handle very high data rates. In order to meet this demand for capacity, optical multiplexing techniques such as wavelength division multiplexing (WDM), optical time division multiplexing (OTDM) and hybrid WDM/OTDM systems need to be utilised. The development of a source of wavelength tunable picosecond optical pulses with excellent temporal and spectral purity at high repetition rates is extremely important for use in such high-speed optical communication systems. The technique of gain switching a commercially available laser diode and self seeding it is shown to be one of the simplest and most cost effective methods of generating transform limited, wavelength tunable pulses with a high Side Mode Suppression Ratio (SMSR). This thesis examines the use of optical gain-switching for the generation of optical pulses that may be used in high-speed OTDM and WDM/OTDM systems. This work specifically deals with the investigation and characterisation of the SMSR and non-linear chirp of optical pulses generated using the gain-switching technique, and outlines how these characteristics, that may degrade system performance, can be optimised such as that optimum performance is attained. In particular, the work demonstrates the development of an optical pulse source with duration 30 dB, jitter 30 dB, that would be suitable for use in OTDM systems operating at 80 Gbit/s

Techniques for nonlinear distortion suppression in radio over fiber communication systems

Radio over fiber (RoF) is a promising technology that will indisputably compete as a viable solution for future wireless, cellular and broadband networks. RoF, when combined with dense wavelength division multiplexing (DWDM), such as SONET/SDH, it can become a complete flexible and cost effective solution to the global telecommunication network, where asynchronous and synchronous communications may be efficiently supported. Subcarrier modulation (SCM) is utilized to modulate a RF signal on light, which in turn will be transmitted by fiber. Unfortunately, the transmission in most cases may become corrupted by nonlinear distortion that is induced by the nonlinear response of the optical transmitter, optical receiver and chromatic dispersion of the single mode fiber (SMF). The nonlinear distortion degrades the receiver sensitivity, which leads to a poor bit error rate (BER) and spurious free dynamic range (SFDR). Ultimately, this will increase RoF system costs and render it impractical. The objective of this thesis is to develop linearization methods that reduce the nonlinear distortion, increase receiver sensitivity and increase SFDR. The designs should also address the entire RoF system by combating the optical power fading issue that will be discussed in Chapter 2 without significantly adding great expense and complexity to the RoF system. Four optical linearization methods are proposed and shown through extensive simulation and/or experimentation to outperform similar existing linearization systems described in literature. The proposed single wavelength balanced system is shown to improve the suppression of 2nd order distortion over the dual wavelength balanced system, thereby leading to greater improvement in receiver sensitivity and BER. Furthermore, the design also suppresses relative intensity noise (RIN). The proposed tunable fiber Bragg grating (FBG) balanced system is capable of suppressing both 2 nd and 3 rd order distortions despite which RF carrier that is used. Furthermore, it was shown to outperform the conventional RoF system in terms of receiver sensitivity and BER. The proposed asymmetric Mach-Zehnder modulator (MZM) has been shown to generate optical single sideband (OSSB) transmissions and outperform the dual-parallel modulator, by improving 3rd order intermodulation distortion (3IMD) suppression and increasing SFDR. The final proposed linearization method is the mixed-polarization MZM, where OSSB is also generated and outperforms the conventional OSSB RoF system in terms of 3IMD suppression and SFDR. Furthermore, close form expressions for SFDR are developed for the final two designs, which is crucial in study of their stability and performance

Investigation of the impact of fibre impairments and SOA-based devices on 2D-WH/TS OCDMA codes

In seeking efficient last-mile solutions for high-capacity, optical code division multiple access (OCDMA) emerges as a promising alternative high-speed optical network that can securely support a multitude of simultaneous users without requiring extensive equipment. This multiplexing technique has recently been the subject of comprehensive research, highlighting its potential for facilitating high-bandwidth multi-access networking. When contrasted with techniques such as wavelength division multiplexing (WDM) and optical time division multiplexing (OTDM), OCDMA offers a more effective and equitable split of available fibre bandwidth among the users. This thesis presents my research focused on the incoherent OCDMA under the influence of optical fibre impairments that uses picosecond multiwavelength pulses to form two-dimensional wavelength hopping time-spreading (2D-WH/TS) incoherent OCDMA codes. In particular, self-phase modulation, temperature induced fibre dispersion, chromatic dispersion, as well as the impact of semiconductor optical amplifier SOA devices deployment on 2D-WH/TS OCDMA code integrity were investigated. These aspects were investigated using a 17-km long bidirectional fibre link between Strathclyde and Glasgow University. In particular, I investigated the impact of temporal skewing among OCDMA code carriers and the importance of selecting small range of wavelengths as code carriers where wide range manifest high dependency on wavelength. This wavelength dependency is exploited furthermore to measure the induced temperature dispersion coefficient accurately and economically. I have conducted experiments to characterise the impact of SOA-device on 2D OCDMA code carries which is evaluated under different bias conditions. This evaluation addressed the potential challenges and ramifications of the gain recovery time of SOA and its wavelength dependency with respect to gain ratio and self-phase modulation (SPM). The OCDMA code was built using multiplexers and delay lines to create a 2D OCDMA code to allow studying the impact of deploying a SOA under different conditions on each wavelength. The concept described above is then extended to the investigation of the SOA’s impact on a 2D-WH/TS OCDMA prime code under high bias current/gain conditions. The overall performance of two different 2D-WH/TS OCDMA systems deploying the SOA was also calculated. I have also investigated the possibility of manipulating chirp in 2D-WH/TS incoherent OCDMA to counteract the self-phase modulation-induced red shift by using single mode fibre and lithium crystals. I have investigated the performance of the picosecond code based optical signal when subjected to temperature variations similar to that experience by most buried fibre systems. I have proposed and demonstrated a novel technique, which I examined analytically and experimentally, that utilises a SOA at the transmitter to create a new code with a new wavelength hopping and spreading time sequences to achieve a unique physical improved secure incoherent OCDMA communication method. A novel fully automated tuneable compensation testbed is also proposed of an autonomous dispersion management in a WH/TS incoherent OCDMA system. The system proposed manipulates the chirp of OCDMA code carriers to limit chromatic dispersion detrimental effect on transmission systems.In seeking efficient last-mile solutions for high-capacity, optical code division multiple access (OCDMA) emerges as a promising alternative high-speed optical network that can securely support a multitude of simultaneous users without requiring extensive equipment. This multiplexing technique has recently been the subject of comprehensive research, highlighting its potential for facilitating high-bandwidth multi-access networking. When contrasted with techniques such as wavelength division multiplexing (WDM) and optical time division multiplexing (OTDM), OCDMA offers a more effective and equitable split of available fibre bandwidth among the users. This thesis presents my research focused on the incoherent OCDMA under the influence of optical fibre impairments that uses picosecond multiwavelength pulses to form two-dimensional wavelength hopping time-spreading (2D-WH/TS) incoherent OCDMA codes. In particular, self-phase modulation, temperature induced fibre dispersion, chromatic dispersion, as well as the impact of semiconductor optical amplifier SOA devices deployment on 2D-WH/TS OCDMA code integrity were investigated. These aspects were investigated using a 17-km long bidirectional fibre link between Strathclyde and Glasgow University. In particular, I investigated the impact of temporal skewing among OCDMA code carriers and the importance of selecting small range of wavelengths as code carriers where wide range manifest high dependency on wavelength. This wavelength dependency is exploited furthermore to measure the induced temperature dispersion coefficient accurately and economically. I have conducted experiments to characterise the impact of SOA-device on 2D OCDMA code carries which is evaluated under different bias conditions. This evaluation addressed the potential challenges and ramifications of the gain recovery time of SOA and its wavelength dependency with respect to gain ratio and self-phase modulation (SPM). The OCDMA code was built using multiplexers and delay lines to create a 2D OCDMA code to allow studying the impact of deploying a SOA under different conditions on each wavelength. The concept described above is then extended to the investigation of the SOA’s impact on a 2D-WH/TS OCDMA prime code under high bias current/gain conditions. The overall performance of two different 2D-WH/TS OCDMA systems deploying the SOA was also calculated. I have also investigated the possibility of manipulating chirp in 2D-WH/TS incoherent OCDMA to counteract the self-phase modulation-induced red shift by using single mode fibre and lithium crystals. I have investigated the performance of the picosecond code based optical signal when subjected to temperature variations similar to that experience by most buried fibre systems. I have proposed and demonstrated a novel technique, which I examined analytically and experimentally, that utilises a SOA at the transmitter to create a new code with a new wavelength hopping and spreading time sequences to achieve a unique physical improved secure incoherent OCDMA communication method. A novel fully automated tuneable compensation testbed is also proposed of an autonomous dispersion management in a WH/TS incoherent OCDMA system. The system proposed manipulates the chirp of OCDMA code carriers to limit chromatic dispersion detrimental effect on transmission systems

Polymer optical fiber gratings for microwave photonics and communications application

Tesis por compendio[ES] Con el continuo desarrollo de materiales y tecnologías de fabricación durante las últimas tres décadas, la atenuación de la transmisión de las fibras ópticas de polímero (POF) se ha reducido considerablemente. Las POF son ventajosas para las redes domésticas, así como para las interconexiones de almacenamiento, y tienen ventajas significativas para muchas aplicaciones de detección, que incluye el límite alto de tensión elástica, alta resistencia a la fractura, alta flexibilidad en la flexión, alta sensibilidad a la tensión y coeficientes termoópticos negativos. Esta tesis consigue mejorar la tecnología de irradiación con láser para POF e investiga dispositivos especiales basados en redes de difracción en POF para comunicaciones ópticas, microondas, fotónica y detección. En particular, desarrollamos la tecnología de fabricación rápida de FBGs en POF con un estudio detallado y la optimización de los parámetros de fabricación de redes de difracción de Bragg en fibra (FBG). Los resultados más destacados incluyen un FBG uniforme de 8 dB con un solo pulso láser Nd: YAG (26 nsm) (8 ns) basado en fibra dopada con BDK, que es el tiempo más corto presentado hasta ahora para la fabricación de FBGs en POF. La irradiación de fibras ópticas de polímero utilizando diferentes materiales basado en el láser KrF a 248 nm permitió demostrar un mejor rendimiento en comparación con el sistema que emplea el láser He-Cd a 325 nm. Además, se fabricaron FBGs uniformes en POFs de índice escalón dopadas con TS en menos de 1 segundo mediante la repetición de pulsos con baja energía. Finalmente, el estudio de la irradiación UV con pulsos de baja energía para la fabricación de redes de difracción estables permitió ahorrar energía en el proceso de fabricación de FBGs en POF, como uno de los principales requisitos para la producción en masa. Basándonos en la tecnología de fabricación mejorada, nos centramos en la fabricación de redes de difracción con diferentes estructuras: se fabricó un FBG con desplazamiento de fase utilizando dos pulsos de 15 ns a 248 nm KrF superpuestos por el método de Moiré; el primer FBG con chirp sintonizable se logró utilizando un solo pulso corto del láser, que abrió nuevas perspectivas a las aplicaciones basadas en redes de difracción con chirp en POF; también se propuso un nuevo método basado en gradientes térmicos para obtener FBG con chirp en POF basadas en FBG uniformes, y se demostró como la forma más conveniente publicada hasta la fecha para lograr este tipo de FBGs no uniformes en POF; y, finalmente, también se han fabricado redes de difracción de largo período utilizando un proceso de fabricación de corto tiempo, especialmente en comparación con investigaciones anteriores. En la última parte de la tesis, y en base a los dispositivos basados en redes de difracción obtenidos a lo largo de este trabajo, se han propuesto varias aplicaciones . De manera similar a los FBG en fibra de sílice, los FBGs con chirp en POF tienen muchas aplicaciones futuras en las áreas de comunicaciones ópticas y de los sensores. Este documento describe la aplicación de detección de tensión basada en una FBG con chirp sintonizable en POF, su aplicación para detección térmica en sistemas biomédicos; e ilustra el potencial de los dispositivos de dispersión sintonizables en el campo de las comunicaciones ópticas, bien como compensación de dispersión o en fotónica de microondas.[CA] Amb el continu desenvolupament de materials i tecnologies de fabricació durant les últimes tres dècades, l'atenuació de la transmissió de les fibres òptiques de polímer (POF) s'ha reduït considerablement. Els POF són avantatjosos per a les xarxes domèstiques, així com per a les interconnexions d'emmagatzematge, i tenen avantatges significatius per a moltes aplicacions de detecció, inclosos els límits de tensió elàstica alta, alta resistència a la fractura, alta flexibilitat en la flexió, alta sensibilitat a la tensió i potencials coeficients termoópticos negatius. Aquesta tesi va millorar la tecnologia d'irradiació amb làser per a POF i va investigar dispositius basats en xarxes difracció de Bragg (FBG) especials en POF per a comunicació òptica, microones, fotònica i detecció. En particular, desenvolupem la tecnologia de fabricació ràpida de FBG en POF amb un estudi detallat i l'optimització dels paràmetres per a la seua fabricació. Els punts destacats dels resultats inclouen un FBG uniforme de 8 dB amb un sol pols del làser Nd: YAG (266 nm) (8 ns) basat en fibra dopada amb BDK, que és el temps més curt reportat per a la fabricació de POF FBG. La irradiació de fibres òptiques de polímer utilitzant diferents materials sota el sistema de làser KrF a 248 nm va permetre demostrar un millor rendiment en comparació amb el sistema de làser Kimmon de 325 nm. A més, els FBG uniformes en el POF dopat amb TS d'índex escalonat es van aconseguir amb menys d'1 segon mitjançant la repetició de polsos de control i l'energia baixa de pols. Finalment, l'estudi de la irradiació d'energia de pols per a la fabricació de FBGs estables va permetre estalviar energia en el procés de fabricació de FBGs en POF, com un dels principals objectius de la producció en massa. Basant-nos en la tecnologia de fabricació millorada, ens centrem en la fabricació de diferents estructures de xarxes de difracció: es va fabricar un FBG amb desplaçament de fase utilitzant dos polsos de 15 ns a 248 nm KrF superposats pel mètode de Moiré; el primer FBG amb chirp sintonitzable es va aconseguir utilitzant un sol pols curt de làser, que va obrir les aplicacions basades en FBG amb chirp en POF; també es va proposar un nou mètode amb gradients tèrmics per a obtindre FBG en POF basat en FBG uniformes, i es va demostrar com la forma més convenient publicada fins hui per a aconseguir FBG POF estimulada; i, finalment, també s'han aconseguit xarxes de llarg període utilitzant un procés de fabricació de curt temps, especialment en comparació amb investigacions anteriors. Finalment, sobre la base dels dispositius de xarxes de difracció obtinguts al llarg d'aquest treball, s'han proposat diverses aplicacions potencials en aquesta tesi. De manera similar que per als FBG amb silici, el FBG amb chirp en POF té moltes aplicacions potencials en comunicacions òptiques i a l¿àrea de sensors. Aquest document descriu l'aplicació de detecció de tensió basada en FBG amb chirp sintonitzable en POF; a més, l'aplicació de detecció tèrmica en sistemes biomèdics; i el potencial dels dispositius de dispersió sintonitzables en les comunicacions òptiques, com per eixample a la compensació de dispersió o a la fotònica de microones.[EN] With the continuing development of material and fabrication technologies over the last three decades, the transmission attenuation of polymer optical fibers (POF) has been greatly decreased. POFs are advantageous for home networks as well as storage interconnections and have significant advantages for many sensing applications, including high elastic strain limits, high fracture toughness, high flexibility in bending, high sensitivity to strain and potential negative thermo-optic coefficients. This thesis improved the laser irradiation technology for POF and investigated special grating devices in POF for optical communication, microware photonics and sensing. In particular, we developed fast POF grating fabrication technology with a detailed study and optimization of the polymer optical fiber Bragg grating (POFBG) fabrication parameters. Highlights of the results include an 8 dB uniform POFBG with one single Nd:YAG (266nm) laser pulse (8 ns) based on BDK doped fiber, which is the shortest time ever reported for POFBG fabrication. The irradiation of polymer optical fibers using different materials under 248 nm KrF laser system allowed to demonstrate a better performance compared with 325 nm Kimmon laser system. Furthermore, uniform FBGs in step-index TS doped POF were achieved with less than 1 second by means of controlling pulse repetition and low pulse energy. Finally, the study of low UV pulse power irradiation for fabricating stable gratings allowed to save energy in the POF grating fabrication process, as one of the main goals for mass production. Based on the improved fabrication technology, we focused on the fabrication of different grating structures: a phase-shifted FBG was fabricated by using two 15 ns 248 nm KrF pulses overlapped by Moiré method; the first tunable chirped FBG was achieved by using a single laser short pulse, which opened the applications based on chirped POF BGs; also a novel thermal annealing method was proposed to obtain chirped POFBGs based on uniform FBGs, and proved as the ever published most convenient way to achieve chirped POFBG; and finally, long period gratings have been also achieved by using a short time fabrication process, specially when compared with previous research. Finally, based on the grating devices obtained throughout this work, several potential applications have been proposed in this thesis. Similarly, to silica chirped FBG, chirped FBG in POF have many potential applications in optical communications and sensing area. This document described the potential strain sensing application based on tunable chirped POFBG; also, the thermal detection application in bio-medical systems; and the potential of tunable dispersion devices in optical communications, i.e., dispersion compensation or microwave photonics.Min, R. (2019). Polymer optical fiber gratings for microwave photonics and communications application [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/125473TESISCompendi

Transparent heterogeneous terrestrial optical communication networks with phase modulated signals

This thesis presents a large scale numerical investigation of heterogeneous terrestrial optical communications systems and the upgrade of fourth generation terrestrial core to metro legacy interconnects to fifth generation transmission system technologies. Retrofitting (without changing infrastructure) is considered for commercial applications. ROADM are crucial enabling components for future core network developments however their re-routing ability means signals can be switched mid-link onto sub-optimally configured paths which raises new challenges in network management. System performance is determined by a trade-off between nonlinear impairments and noise, where the nonlinear signal distortions depend critically on deployed dispersion maps. This thesis presents a comprehensive numerical investigation into the implementation of phase modulated signals in transparent reconfigurable wavelength division multiplexed fibre optic communication terrestrial heterogeneous networks. A key issue during system upgrades is whether differential phase encoded modulation formats are compatible with the cost optimised dispersion schemes employed in current 10 Gb/s systems. We explore how robust transmission is to inevitable variations in the dispersion mapping and how large the margins are when suboptimal dispersion management is applied. We show that a DPSK transmission system is not drastically affected by reconfiguration from periodic dispersion management to lumped dispersion mapping. A novel DPSK dispersion map optimisation methodology which reduces drastically the optimisation parameter space and the many ways to deploy dispersion maps is also presented. This alleviates strenuous computing requirements in optimisation calculations. This thesis provides a very efficient and robust way to identify high performing lumped dispersion compensating schemes for use in heterogeneous RZ-DPSK terrestrial meshed networks with ROADMs. A modified search algorithm which further reduces this number of configuration combinations is also presented. The results of an investigation of the feasibility of detouring signals locally in multi-path heterogeneous ring networks is also presented

Advanced UV inscribed fibre grating structures and applications in optical sensing and laser systems

This thesis presents detailed investigation of UV inscribed fibre grating based devices and novel developments in the applications of such devices in optical sensing and fibre laser systems. The major contribution of this PhD programme includes the systematic study on fabrication, spectral characteristics and applications of different types of UV written in-fibre gratings such as Type I and IA Fibre Bragg Gratings (FBGs), Chirped Fibre Bragg Gratings (CFBGs) and Tilted Fibre Gratings (TFGs) with small, large and 45º tilted structures inscribed in normal silica fibre. Three fabrication techniques including holographic, phase-mask and blank beam exposure scanning, which were employed to fabricate a range of gratings in standard single mode fibre, are fully discussed. The thesis reports the creation of smart structures with self-sensing capability by embedding FBG-array sensors in Al matrix composite. In another part of this study, we have demonstrated the particular significant improvements made in sensitising standard FBGs to the chemical surrounding medium by inducing microstructure to the grating by femtosecond (fs) patterning assisted chemical etching technique. Also, a major work is presented for the investigation on the structures, inscription methods and spectral Polarisation Dependent Loss (PDL) and thermal characteristics of different angle TFGs. Finally, a very novel application in realising stable single polarisation and multiwavelength switchable Erbium Doped Fibre Lasers (EDFLs) using intracavity polarisation selective filters based on TFG devices with tilted structures at small, large and exact 45° angles forms another important contribution of this thesis

An investigation of chirped fibre Bragg gratings Fabry-Perot interferometer for sensing applications

Fibre interferometer configurations such as the Michelson and Fabry-Perot (FP) have been formed using uniformed and chirped Fibre Bragg Gratings (FBG) acting as partial reflectors. As well as increasing the dynamic range of the interferometer, chirped FBGs are dispersive elements which can allow tuning of the response of the interferometers to measurements such as strain and temperature. In a chirped FBG, the resonance condition of the FBG varies along the FBG’s length. Each wavelength is reflected from different portion of the FBG, which imparts a different group delay to the different components of the incident light. The implication of the wavelength dependence resonance position is that there is a large movement of the resonance position when the incident wavelength is changed. A chirped FBG FP can be configured in which the large movement of the reflection positions in the respective FBGs forming the cavity changes in such a way that the sensitivity of the cavity can be enhanced or reduced. The FP filter response can be tailored through the extent of chirp. In this project a theoretical model of the in fibre interferometers formed using chirped FBGs is presented. The model indicates that it is possible to form FP cavities with varying sensitivity to strain and temperature by appropriate choice of chirp parameters and cavity length. An experimental demonstration of a chirped FBG FP cavity with reduced sensitivity to strain. This scheme offers flexibility in determining the sensitivity of the FP sensor to strain, not only through the gauge length but also via the parameters of the chirped FBG pairs, allowing the use of long or short gauge length sensors. It is possible to configure the system to exhibit enhanced sensitivity to strain or alternatively, to have reduced or even zero strain sensitivity. This ability to tailor the sensitivity of the FP via the FBG parameters will enhance the capabilities of FP sensor system.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Photonic Time-Stretch Enabled High Throughput Microwave and MM-Wave Interferometry Applied to Fibre Grating Sensors and Non-Contact Measurement

The research presented in this thesis is focused towards developing real-time, high-speed applications, employing ultrafast optical microwave generation and characterisation techniques. This thesis presents a series of experiments wherein mode-locked laser pulses are utilised. Photonics-based microwave and MM-Wave generation and detection are explored and employed for applications pertaining to fibre grating sensors and non-contact measurement. The application concepts leverage techniques from optical coherence tomography and non-destructive evaluation of turbid media. In particular, I use the principle of dispersion-induced photonic Time-Stretch to slow down high-speed waveforms to speeds usable by state-of-the-art photo-detectors and digital signal processors. The concept of photonic time-stretch is applied to map instantaneous microwave frequency to the time instant of the signal, which in turn is related to spatial location as established by the space-wavelength-time conversions. The experimental methods applied throughout this thesis is based upon Michelson interferometer architecture. My original contribution to knowledge is the realisation of Photonics-based, single tone, and chirped microwave and MM-Wave pulse generation applied to deciphering physical strain profile along the length of a chirped fibre Bragg grating employed in a Michelson interferometer configuration. This interrogation scheme allows intra-grating high-resolution, high-speed, and temperature independent strain measurement. This concept is further extended to utilise photonic generation of microwave pulses to characterise surface profile information of thin film and thin plate infrared transparent slides of variable thickness setup in a Michelson interferometer architecture. The method basis for photonically generated high-frequency microwave signals utilises the principle of photonic Time-Stretch. The research was conducted in the Photonics Lab at the University of Kent. In addition, the photonically generated microwave/ MM-Wave pulses is utilised as a potential broadband frequency-swept source for non-contact measurement of turbid media. Investigation of the proof-of-concept based on an MM-Wave coherence tomography set-up is implemented at Vrije Universiteit Brussel (VUB), Department of Electronics and Informatics (ETRO)

Optimization of multicore optical fibers with fiber Bragg gratings towards bend and shape sensing

A shape sensor based on fiber Bragg gratings (FBGs) in multicore fibers is a complex device with multiple factors which have to be accounted for a successful measure- ment system. In this dissertation, I considered several aspects of such shape and curvature sensors