DESIGN, MODELING, OPTIMIZATION, AND BENCHMARKING OF INTERCONNECTS AND SCALING TECHNOLOGIES AND THEIR CIRCUIT AND SYSTEM LEVEL IMPACT

This research focuses on the future of integrated circuit (IC) scaling technologies at the device and back end of line (BEOL) level. This work includes high level modeling of different technologies and quantifying potential performance gains on a circuit and system level. From the device side, this research looks at the scaling challenges and the future scaling drivers for conventional charge-based devices implemented at the 7nm technology node and beyond. It examines the system-level performance of stacking device logic in addition to tunneling field effect transistors (TFET) and their potential as beyond-CMOS devices. Finally, this research models and benchmarks BEOL scaling challenges and evaluates proposed technological advancements such as metal barrier scaling for copper interconnects and replacing local interconnects with ruthenium. Potential impact on performance, power, and area of these interconnect technologies is quantified for fully placed and routed circuits.Ph.D

Modelling of field-effect transistors based on 2D materials targeting high-frequency applications

New technologies are necessary for the unprecedented expansion of connectivity and communications in the modern technological society. The specific needs of wireless communication systems in 5G and beyond, as well as devices for the future deployment of Internet of Things has caused that the International Technology Roadmap for Semiconductors, which is the strategic planning document of the semiconductor industry, considered since 2011, graphene and related materials (GRMs) as promising candidates for the future of electronics. Graphene, a one-atom-thick of carbon, is a promising material for high-frequency applications due to its intrinsic superior carrier mobility and very high saturation velocity. These exceptional carrier transport properties suggest that GRM-based field-effect transistors could potentially outperform other technologies. This thesis presents a body of work on the modelling, performance prediction and simulation of GRM-based field-effect transistors and circuits. The main goal of this work is to provide models and tools to ease the following issues: (i) gaining technological control of single layer and bilayer graphene devices and, more generally, devices based on 2D materials, (ii) assessment of radio-frequency (RF) performance and microwave stability, (iii) benchmarking against other existing technologies, (iv) providing guidance for device and circuit design, (v) simulation of circuits formed by GRM-based transistors.Comment: Thesis, 164 pages, http://hdl.handle.net/10803/40531

Static random-access memory designs based on different FinFET at lower technology node (7nm)

Title from PDF of title page viewed January 15, 2020Thesis advisor: Masud H ChowdhuryVitaIncludes bibliographical references (page 50-57)Thesis (M.S.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices that can be utilized to improve the performance of SRAM designs at lower technology nodes. In this thesis, I present detail analysis of SRAM cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% compared to 8T SRAM. Read stability and write ability of SRAM cells are determined using Static Noise Margin and N- curve methods. Moreover, Monte Carlo simulations are performed on the SRAM cells to evaluate process variations. Simulations were done in HSPICE using 7nm Asymmetrical Underlap FinFET technology. The quasiplanar FinFET structure gained considerable attention because of the ease of the fabrication process [1] – [4]. Scaling of technology have degraded the performance of CMOS designs because of the short channel effects (SCEs) [5], [6]. Therefore, there has been upsurge in demand for FinFET devices for emerging market segments including artificial intelligence and cloud computing (AI) [8], [9], Internet of Things (IoT) [10] – [13] and biomedical [17] –[18] which have their own exclusive style of design. In recent years, many Underlapped FinFET devices were proposed to have better control of the SCEs in the sub-nanometer technologies [3], [4], [19] – [33]. Underlap on either side of the gate increases effective channel length as seen by the charge carriers. Consequently, the source-to-drain tunneling probability is improved. Moreover, edge direct tunneling leakage components can be reduced by controlling the electric field at the gate-drain junction . There is a limitation on the extent of underlap on drain or source sides because the ION is lower for larger underlap. Additionally, FinFET based designs have major width quantization issue. The width of a FinFET device increases only in quanta of silicon fin height (HFIN) [4]. The width quantization issue becomes critical for ratioed designs like SRAMs, where proper sizing of the transistors is essential for fault-free operation. FinFETs based on Design/Technology Co-Optimization (DTCO_F) approach can overcome these issues [38]. DTCO_F follows special design rules, which provides the specifications for the standard SRAM cells with special spacing rules and low leakages. The performances of 6T SRAM designs implemented by different FinFET devices are compared for different pull-up, pull down and pass gate transistor (PU: PD:PG) ratios to identify the best FinFET device for high speed and low power SRAM applications. Underlapped FinFETs (UF) and Design/Technology Co-Optimized FinFETs (DTCO_F) are used for the design and analysis. It is observed that with the PU: PD:PG ratios of 1:1:1 and 1:5:2 for the UF-SRAMs the read energy has degraded by 3.31% and 48.72% compared to the DTCO_F-SRAMs, respectively. However, the read energy with 2:5:2 ratio has improved by 32.71% in the UF-SRAM compared to the DTCO_F-SRAMs. The write energy with 1:1:1 configuration has improved by 642.27% in the UF-SRAM compared to the DTCO_F-SRAM. On the other hand, the write energy with 1:5:2 and 2:5:2 configurations have degraded by 86.26% and 96% in the UF-SRAMs compared to the DTCO_F-SRAMs. The stability and reliability of different SRAMs are also evaluated for 500mV supply. From the analysis, it can be concluded that Asymmetrical Underlapped FinFET is better for high-speed applications and DTCO FinFET for low power applications.Introduction -- Next generation high performance device: FinFET -- FinFET based SRAM bitcell designs -- Benchmarking of UF-SRAMs and DTCO-F-SRAMS -- Collaborative project -- Internship experience at INTEL and Marvell Semiconductor -- Conclusion and future wor