Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

Time-Modulated Array Co-Simulation with the Aid of Commercial Software

This thesis report exhibits an integrated Electromagnetic/Circuit level technique to analyze the time modulated arrays. I restate this work in commercial software which was already developed in CAD domain i.e. combining the exact harmonic balanced based analysis of non-linear switches with the electromagnetic characterization of the radiating elements. In this commercial software I try to perform a full-wave co-simulation to compute the radiated far-field envelope to show the array behavior. Simulation in this new software allows a precise evaluation of several non-linear performance aspects of the radiating system, such as power usage capabilities and the switch modulation frequency boundary. Secondly I also discuss a TMA wireless power transfer technique which is based on two step procedure. In this case I carry out the full wave co-simulation in this new commercial software to analyze the antenna array with modulated non-linear feeding network. Schottky-diode based network provide proper modulated RF excitations of the array elements. Therefore, the array architecture is extremely simple, if compared to phased arrays, only simple control circuit board

An evaluation of temporal and club angle parameters during golf swings using low cost video analyses packages

The purpose of this study was to compare swing time and golf club angle parameters during golf swings using three, two dimensional (2D) low cost, Augmented-Video-based-Portable-Systems (AVPS) (Kinovea, SiliconCoach Pro, SiliconCoach Live). Twelve right-handed golfers performed three golf swings whilst being recorded by a high-speed 2D video camera. Footage was then analysed using AVPS-software and the results compared using both descriptive and inferential statistics. There were no significant differences for swing time and the golf phase measurements between the 2D and 3D software comparisons. In general, the results showed a high Intra class Correlation Coefficient (ICC > 0.929) and Cronbach’s Coefficient Alpha (CCA > 0.924) reliability for both the kinematic and temporal parameters. The inter-rater reliability test for the swing time and kinematic golf phase measurements on average were strong. Irrespective of the AVPS software investigated, the cost effective AVPS can produce reliable output measures that benefit golf analyses

Study of mm-wave Fixed Beam and Frequency Beam-Scanning Antenna Arrays

Millimeter-wave frequencies are anticipated to be widely adapted for future wireless communication systems to resolve the demand of high data-rate and capacity issues. The millimeter-wave frequency range offers wide spectrum and a shift for most newly developing technologies as the microwave and lower frequency bands are becoming overcrowded and congested. These high frequency bands offer short wavelengths which has enabled the researchers to design and implement compact and adaptable antenna solutions. This research focuses on the implementation, transformation and modification of antenna structures used in lower frequency bands to millimeter-wave applications with high gain and multi-band and wideband performances. The first part of the thesis presents a microstrip patch array antenna with high gain in the upper 26 GHz range for 5G applications. The tolerance of the antenna, on widely used Rogers RT/duroid 5880 substrate, is observed with the edge-fed structure when curved in both concave and convex directions. In the second part of the thesis, 20 rectangular loops are arranged in a quasi-rhombic shaped planar microstrip grid array antenna configuration with dual-band millimeter-wave performance. A comparison with equal sized microstrip patch array is also presented to analyse the performance. The antenna operates in the upper 26 GHz band and has two frequency bands in close proximity. The third part of the thesis discusses the transition from wire Bruce array antenna to planar technology. Having been around for nearly a century and despite the simplicity of structure, the research community has not extended the concept of Bruce array antenna for further research. The proposed planar Bruce array antenna operates in three frequency v bands with optimization focus on 28.0 GHz band that has a directive fan-beam radiation pattern at broadside whereas the other two frequency ranges, above 30 GHz, have dual-beam radiation patterns which provide radiation diversity in narrow passages. The final part of the thesis deals with the transformation and modification of wire Bruce array antenna geometry to edge-fed printed leaky-wave antennas for millimeter-wave frequency scanning applications. In the first approach, the lengths of the unit-cell are optimised, without any additional circuitry, to enable two scanning ranges and mitigate the Open-Stopband, at broadside, for seamless scanning in the first range. A Klopfen-stein tapered divider is then deployed to make a linear array of the proposed antenna to achieve high gain. In the second approach, the horizontal and vertical lengths of the meandered unit-cell are replaced with semi-circular and novel bowtie elements, respectively, to obtain wide scanning range. The numerical results and optimizations have been performed using CST Micro-wave Studio where the effects of metallization and dielectric losses are properly consid-ered. The prototypes of the proposed antennas have been fabricated and experimentally validated

Fractal and Polar Microstrip Antennas and Arrays for Wireless Communications

This chapter presents the research done by authors in recent years on microstrip antennas and their applications in wireless sensors network. The subject is delimited to the study of conventional microstrip antennas, from which antennas with fractal and polar shapes are proposed. A detailed description of the antenna design methodology is presented for some prototypes of microstrip antennas manufactured with different dielectric substrates. Analysis of the proposed antennas has been done through computational simulation of full-wave methods. Experimental characterization of antennas and dielectric materials has been performed with the use of a vector network analyzer. The results obtained for the resonant and radiation parameters of the antennas are presented. Computer-aided design (CAD) of microstrip antennas and arrays using fractal and polar geometrical transformations results in a wide class of antenna elements with desirable and unique characteristics, such as compact, exclusive, and esthetic antenna design for multiband or broadband frequency operation with stable radiation pattern

Analysis of Product Architectures of Pin Array Technologies for Tactile Displays

Refreshable tactile displays based on pin array technologies have a significant impact on the education of children with visual impairments, but they are prohibitively expensive. To better understand their design and the reason for the high cost, we created a database and analyzed the product architectures of 67 unique pin array technologies from literature and patents. We qualitatively coded their functional elements and analyzed the physical parts that execute the functions. Our findings highlight that pin array surfaces aim to achieve three key functions, i.e., raise and lower pins, lock pins, and create a large array. We also contribute a concise morphological chart that organises the various mechanisms for these three functions. Based on this, we discuss the reasons for the high cost and complexity of these surface haptic technologies and infer why larger displays and more affordable devices are not available. Our findings can be used to design new mechanisms for more affordable and scalable pin array display systems