2,304 research outputs found

    Channel Characterization for Chip-scale Wireless Communications within Computing Packages

    Get PDF
    Wireless Network-on-Chip (WNoC) appears as a promising alternative to conventional interconnect fabrics for chip-scale communications. WNoC takes advantage of an overlaid network composed by a set of millimeter-wave antennas to reduce latency and increase throughput in the communication between cores. Similarly, wireless inter-chip communication has been also proposed to improve the information transfer between processors, memory, and accelerators in multi-chip settings. However, the wireless channel remains largely unknown in both scenarios, especially in the presence of realistic chip packages. This work addresses the issue by accurately modeling flip-chip packages and investigating the propagation both its interior and its surroundings. Through parametric studies, package configurations that minimize path loss are obtained and the trade-offs observed when applying such optimizations are discussed. Single-chip and multi-chip architectures are compared in terms of the path loss exponent, confirming that the amount of bulk silicon found in the pathway between transmitter and receiver is the main determinant of losses.Comment: To be presented 12th IEEE/ACM International Symposium on Networks-on-Chip (NOCS 2018); Torino, Italy; October 201

    Scalability of broadcast performance in wireless network-on-chip

    Get PDF
    Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

    Integration of 60-GHz Microstrip Antennas with CMOS Chip

    Get PDF

    FDMA Enabled Phase-based Wireless Network-on-Chip using Graphene-based THz-band Antennas

    Get PDF
    The future growth in System-on-chip design is moving in the direction of multicore systems. Design of efficient interconnects between cores are crucial for improving the performance of a multicore processor. Such trends are seen due to the benefits the multicore systems provide in terms of power reduction and scalability. Network-on-chips (NoC) are viewed as an emerging solution in the design of interconnects in multicore systems. However, Traditional Network-on-chip architectures are no longer able to satisfy the performance requirements due to long distance communication over multi-hop wireline paths. Multi-hop communication leads to higher energy consumption, increase in latency and reduction in bandwidth. Research in recent years has explored emerging technologies such as 3D integration, photonic and radio frequency based Network-on-chips. The use of wireless interconnects using mm-wave antennas are able to alleviate the performance issues in a wireline interconnect system. However, to satisfy the increasing demand for higher bandwidth and lower energy consumption, Wireless Network-on-Chip enabled with high speed direct links operating in THz band between distant cores is desired. Recent research has brought to light highly efficient graphene-based antennas operating in THz band. These antennas can provide high data rate and are found to consume less power with low area overheads. In this thesis, an innovative approach using novel devices based on graphene structures is proposed to provide a high-performance on-chip interconnection. This novel approach combines the regular NoC structure with the proposed wireless infrastructure to exploit the performance benefits. An architecture with wireless interfaces on every core is explored in this work. Simultaneous multiple communications in a network can be achieved by adopting Frequency Division Multiple access (FDMA). However, in a system where all cores are equipped with a wireless interface, FDMA requires more number of frequency bands. This becomes difficult to achieve as the system scales and the number of cores increase. Therefore, a FDMA protocol along with a 4-phased repetitive multi-band architecture is envisioned in this work. The phase-based protocol allows multiple wireless links to be active at a time, the phase-based protocol along with the FDMA protocol provides a reliable data transfer between cores with lesser number of frequency bands. In this thesis, an architecture with a combination of FDMA and phase-based protocol using point-to-point graphene-based wireless links is proposed. The proposed architecture is also extended for a multichip system. With cycle accurate system-level simulations, it is shown that the proposed architecture provides huge gains in performance and energy-efficiency in data transfer both in NoC based multicore and multichip systems

    Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

    Full text link
    Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin
    • …
    corecore