Winter oilseed-rape yield estimates from hyperspectral radiometer measurements

Spectral reflectance data can be used for estimation of plant biophysical parameters such as seed yield, related to the use of solar energy. A field experiment was conducted to investigate relationships between canopy reflectance and seed yield of winter oilseed rape sown on four different dates. Ground hyperspectral reflectance measurements were made using a hand-held radiometer and multispectral images were taken with a VIS-NIR camera. The different sowing dates generated a wide range of difference in crop spectral response and seed yields. The strongest relationships (R2=0.87) between the yield and spectral data recorded by both sensors occurred at early flowering stages. Later, the presence of flowers caused a decline in the relationship between yield and spectral data especially in the visible (VIS) range. In the full flowering stage the strongest correlation (R2=0.72) with the yield showed vegetation indices of the near-infrared (NIR) bands

Air pollution and livestock production

The air in a livestock farming environment contains high concentrations of dust particles and gaseous pollutants. The total inhalable dust can enter the nose and mouth during normal breathing and the thoracic dust can reach into the lungs. However, it is the respirable dust particles that can penetrate further into the gas-exchange region, making it the most hazardous dust component. Prolonged exposure to high concentrations of dust particles can lead to respiratory health issues for both livestock and farming staff. Ammonia, an example of a gaseous pollutant, is derived from the decomposition of nitrous compounds. Increased exposure to ammonia may also have an effect on the health of humans and livestock. There are a number of technologies available to ensure exposure to these pollutants is minimised. Through proactive means, (the optimal design and management of livestock buildings) air quality can be improved to reduce the likelihood of risks associated with sub-optimal air quality. Once air problems have taken hold, other reduction methods need to be applied utilising a more reactive approach. A key requirement for the control of concentration and exposure of airborne pollutants to an acceptable level is to be able to conduct real-time measurements of these pollutants. This paper provides a review of airborne pollution including methods to both measure and control the concentration of pollutants in livestock buildings

Simulation of site-specific irrigation control strategies with sparse input data

Crop and irrigation water use efficiencies may be improved by managing irrigation application timing and volumes using physical and agronomic principles. However, the crop water requirement may be spatially variable due to different soil properties and genetic variations in the crop across the field. Adaptive control strategies can be used to locally control water applications in response to in-field temporal and spatial variability with the aim of maximising both crop development and water use efficiency. A simulation framework ‘VARIwise’ has been created to aid the development, evaluation and management of spatially and temporally varied adaptive irrigation control strategies (McCarthy et al., 2010). VARIwise enables alternative control strategies to be simulated with different crop and environmental conditions and at a range of spatial resolutions. An iterative learning controller and model predictive controller have been implemented in VARIwise to improve the irrigation of cotton. The iterative learning control strategy involves using the soil moisture response to the previous irrigation volume to adjust the applied irrigation volume applied at the next irrigation event. For field implementation this controller has low data requirements as only soil moisture data is required after each irrigation event. In contrast, a model predictive controller has high data requirements as measured soil and plant data are required at a high spatial resolution in a field implementation. Model predictive control involves using a calibrated model to determine the irrigation application and/or timing which results in the highest predicted yield or water use efficiency. The implementation of these strategies is described and a case study is presented to demonstrate the operation of the strategies with various levels of data availability. It is concluded that in situations of sparse data, the iterative learning controller performs significantly better than a model predictive controller

Using UAV to Identify the Optimal Vegetation Index for Yield Prediction of Oil Seed Rape (Brassica napus L.) at the Flowering Stage

Suitability of the vegetation indices of normalized difference vegetation index (NDVI), blue normalized difference vegetation index (BNDVI), and normalized difference yellowness index (NDYI) obtained by means of UAV at the flowering stage of oil seed rape for the prediction of seed yield and usability of these vegetation indices in the identification of anomalies in the condition of the flowering growth were verified based on the regression analysis. Correlation analysis was performed to find the degree of yield dependence on the values of NDVI, BNDVI, and NDYI indices, which revealed a strong, significant linear positive dependence of seed yield on BNDVI (R = 0.98) and NDYI (R = 0.95). The level of correlation between the NDVI index and the seed yield was weaker (R = 0.70) than the others. Regression analysis was performed for a closer determination of the functional dependence of NDVI, BNDVI, and NDYI indices and the yield of seeds. Coefficients of determination in the linear regression model of NDVI, BNDVI, and NDYI indices reached the following values: R2 = 0.48 (NDVI), R2 = 0.95 (BNDVI), and R2 = 0.90 (NDYI). Thus, it was shown that increased density of yellow flowers decreased the relationship between NDVI and crop yield. The NDVI index is not appropriate for assessing growth conditions and prediction of yields at the flowering stage of oil seed rape. High accuracy of yield prediction was achieved with the use of BNDVI and NDYI. The performed analysis of NDVI, BNDVI, and NDYI demonstrated that particularly the BNDVI and NDYI indices can be used to identify problems in the development of oil seed rape growth at the stage of flowering, for their precise localization, and hence to targeted and effective remedial measures in line with the principles of precision agriculture.O

Measuring and modelling parameters from hyperspectral sensors for site-specific crop protection

This thesis sought to optimise systems for plant protection in precision agriculture through developing a field method for estimating crop status parameters from hyperspectral sensors, and an empirical model for estimating the required herbicide dose in different parts of the field. The hyperspectral reflectance measurements in the open field took the form of instantaneous spectra recording using an existing method called feature vector based analysis (FVBA), which was applied on disease severity. A new method called iterative normalisation based analysis (INBA) was developed and evaluated on disease severity and plant biomass. The methods revealed two different spectral signatures in both disease severity and plant density data. By concentrating the analysis on a 12% random subset of the hyperspectral field data, the unknown part of the data could be estimated with 94-97% coefficient of determination. The empirical model for site-specific weed control combined a model for weed competition and a dose response model. Comparisons of site-specific and conventional uniform spraying using model simulations showed that site-specific spraying with the uniform recommended dose resulted in 64% herbicide saving. Comparison with a uniform dose with equal weed control effect resulted in 36% herbicide saving. The methods developed in this thesis can be used to improve systems for site-specific plant protection in precision agriculture and to evaluate site-specific plant protection systems in relation to uniform spraying. Overall, this could be beneficial both for farm finances and for the environment

Automatic Identification and Monitoring of Plant Diseases Using Unmanned Aerial Vehicles: A Review

Disease diagnosis is one of the major tasks for increasing food production in agriculture. Although precision agriculture (PA) takes less time and provides a more precise application of agricultural activities, the detection of disease using an Unmanned Aerial System (UAS) is a challenging task. Several Unmanned Aerial Vehicles (UAVs) and sensors have been used for this purpose. The UAVs’ platforms and their peripherals have their own limitations in accurately diagnosing plant diseases. Several types of image processing software are available for vignetting and orthorectification. The training and validation of datasets are important characteristics of data analysis. Currently, different algorithms and architectures of machine learning models are used to classify and detect plant diseases. These models help in image segmentation and feature extractions to interpret results. Researchers also use the values of vegetative indices, such as Normalized Difference Vegetative Index (NDVI), Crop Water Stress Index (CWSI), etc., acquired from different multispectral and hyperspectral sensors to fit into the statistical models to deliver results. There are still various drifts in the automatic detection of plant diseases as imaging sensors are limited by their own spectral bandwidth, resolution, background noise of the image, etc. The future of crop health monitoring using UAVs should include a gimble consisting of multiple sensors, large datasets for training and validation, the development of site-specific irradiance systems, and so on. This review briefly highlights the advantages of automatic detection of plant diseases to the growers

Combining remote sensing and crop modeling techniques to derive a nitrogen fertilizer application strategy

The crucial question in this thesis was how can remote sensing data and crop models be used to derive a N fertilizer strategy that is capable to lower the environmental side effects of N fertilizer application. This raised the following detailed objectives: The first objective (i) how N content determination via spectral reflectance is influenced by different leaves and positions on the leaf was investigated in Publication I. Different wheat plants were cultivated under different N levels and under drought stress in two hydroponic greenhouse trials. Spectral reflectance measurements were taken from three leaves and at three positions on the leaf for each plant. In total, 16 vegetation indices broadly used in the literature were calculated based on the spectral reflectance for each combination of leaf and position. The plant N content was determined by lab analyses. Neither the position on the leaf nor leaf number had an impact on the accuracy of plant N determination via spectral reflectance measurements. Therefore measurements taken at the canopy level seem to be a valid approach. However, if other stress symptoms like drought or disease infection occur, a differentiation between leaves and positions on the leaf might play a more crucial role. Publication II dealt with the second objective on (ii), how to incorporate leaf disease into the DSSAT wheat model to enable the simulation of the impact of leaf disease on yield. An integration of sensor information in crop growth models requires the update of model state variables. A model extension was developed by adding a pest damage module to the existing wheat model. The approach was tested on a two-year dataset from Argentina with different wheat cultivars and on a one-year dataset from Germany with different inoculum levels of septoria tritici blotch (STB). After the integration of disease infection, the accuracy of the simulated yield and leaf area index (LAI) was improved. The Root mean squared error (RMSE) values for yield (1144 kg ha−1) and LAI (1.19 m2 m−2) were reduced by half (499 kg ha−1) for yield and LAI (0.69 m2 m−2). A sensitivity analysis also showed a strong responsiveness of the model by the integration of different STB disease infection scenarios. Increasing the modeling accuracy even further a MM approach seems to be suitable. Assembling more models increases the complexity of the simulation and the involved calibration procedure especially if the user is not familiar with all models. To avoid these conflicts, Publication III evaluated the third objective (iii) if an automatic calibration procedure in a MM approach for winter wheat can eliminate the subjectivity factor in model calibration. The model calibration was performed on a 4-yr N wheat fertilizer trial in southwest Germany. The evaluation mean showed satisfying results for the calibration (d-Index 0.93) and evaluation dataset (d-Index 0.81). This lead to the fourth (iv) objective to use a MM approach to improve the overall modeling accuracy. The evaluation of a fertilizer trial showed an improved modeling accuracy in most cases, especially in the drought season 2018. Based on the combination of a MM approach and the incorporation of sensor data, a Nitrogen Application Prescription System (NAPS) was developed. The initial NAPS setup requires long term recorded data (yield, weather, and soil) to ensure proper MM calibration. After calibration, the current growing season conditions are required (weather, management information) until the N application date. Afterward, the NAPS incorporates remote sensing information and generated weather for running future N application scenarios. The selection of the proper amount of N is determined by economic and ecological criteria. Furthermore, in order to account for differences in in-field variabilities and to deliver a N prescription site-specifically, the NAPS concept has to be applied on a geospatial scale by adjusting soil parameters spatially. The NAPS concept has the potential to adjust the N application more economically and ecologically by using current sensor data, historical yield records, and future weather prediction to derive a more precise N application strategy. Finally, this concept exhibits the potential for reconciliation of the issue of an economic, agricultural production without harming the environment.In dieser Arbeit wurde eruiert, ob mit Hilfe von Sensordaten und Pflanzenwachstumsmodellen eine N-Düngemittelstrategie abgeleitet werden kann, die in der Lage ist die ökologischen Belastung zu verringern. Dies umfasste die Evaluation folgender Fragestellungen: (I) Wird die spektrale Reflexion und somit die Bestimmung der N-Konzentration durch die Messung an verschiedenen Blattetagen und -Positionen beeinflusst (Publikation I)? Für die Klärung dieser ersten Frage wurden in zwei hydroponischen Gewächshausversuchen Weizenpflanzen bei unterschiedlicher N-Exposition und Trockenstress kultiviert. Für jede Pflanze wurden spektrale Reflexionsmessungen an drei Blattetagen und an drei Positionen auf dem Blatt durchgeführt. Insgesamt wurden die 16 üblichsten auf spektraler Reflexion basierenden Vegetationsindizes für jede Kombination von Blattetage und -Position berechnet. Die N-Konzentration der Pflanze wurde durch Laboranalysen bestimmt. Weder die Position auf dem Blatt noch die Blattetage hatten einen Einfluss auf die Genauigkeit der Bestimmung der N-Konzentration der Pflanze durch spektrale Reflexionsmessungen. Daher sind Messungen auf Bestandsebene ausreichend. Falls jedoch weitere Stressfaktoren wie Trockenheit oder Krankheitsbefall auftreten, kann eine Differenzierung zwischen verschiedenen Blattetagen notwendig oder von Vorteil sein. In der nächsten Fragestellung (Publikation II) wurde untersucht, wie Blattkrankheiten in ein DSSAT-Weizenmodell integriert werden können, um so die Auswirkungen von Blattkrankheiten auf den Ertrag zu simulieren. Eine Modellerweiterung wurde entwickelt, durch die Integration eines Blattkrankheitsmoduls in das bestehende DSSAT Weizenmodell. Das Modul simuliert die Auswirkungen des täglichen Schadens durch die Krankheit auf die Photosynthese und den Blattflächenindex. Der Ansatz wurde an einem zweijährigen Datensatz aus Argentinien mit verschiedenen Weizensorten und an einem einjährigen Datensatz aus Deutschland mit verschiedenen Inokulumniveaus von Septoria tritici-Blotch (STB) getestet. Die Sensitivitätsanalyse zeigte die Möglichkeit des Modells, den Ertrag in einer exponentiellen Beziehung mit zunehmendem Infektionsgrad (0-70%) zu reduzieren. Das erweiterte Modell stellt somit eine Möglichkeit dar, STB-Infektionen standortspezifisch in Verbindung mit verfügbaren Sensordaten zu simulieren. Um die Modellierungsgenauigkeit noch weiter zu erhöhen, wurde der Einsatz eines MM-Ansatz geprüft. Die Kombination von verschiedenen Modellen erhöht die Komplexität der Simulation und des damit verbundenen Kalibrierungsverfahrens, insbesondere wenn der Benutzer nicht mit allen Modellen vertraut ist. Die dritte Fragestellung (iii) untersuchte daher, ob objektive Kalibrierungsergebnisse gewährleitet werden könnten, wenn die cultivar coefficients im Modell auf Basis tatsächlich gemessener Daten mittels eines neu entwickelten automatischen Calibrator-Programms optimiert wurden. Die Modellkalibrierung wurde an einem 4-jährigen-Weizendüngungsversuch in Südwestdeutschland durchgeführt. Die statistische Auswertung des Kalibrierverfahrens zeigte zufriedenstellende Ergebnisse und führte zur vierten Fragestellung. Die vierte Fragestellung befasste sich mit dem Thema, ob ein MM-Ansatz die Gesamtmodelliergenauigkeit verbessern kann. Die Auswertung des Düngemittelversuchs zeigte in den meisten Fällen eine verbesserte Modellierungsgenauigkeit, insbesondere in einem durch Wasserstress geprägten Versuchsjahr wie 2018. Unter Verwendung eines MM-Ansatzes, durch Anpassung der Modellvariablen und durch die Integration von Sensordaten wurde ein Nitrogen Application Prescription System (NAPS) entwickelt. Eine Voraussetzung für das NAPS-Konzepts ist das Vorhandensein von Langzeit-Daten (Ertrag, Klima- und Bodenbedingungen), um eine korrekte MM-Kalibrierung zu gewährleisten. Nach der Kalibrierung werden die Bedingungen der aktuellen Wachstumssaison (Wetter, Managementinformationen) bis zum Düngetermin benötigt. Anschließend berechnet das NAPS basierend auf Sensorinformationen und simulierten Wetterbedingungen verschiedene Düngeszenarien. Ökonomische und ökologische Kriterien bestimmen die optimierte Düngemenge. Darüber hinaus muss das NAPS-Konzept auf räumlicher Ebene arbeiten, indem es die Bodenparameter berücksichtigt. So kann unter Beachtung der Feldvariabilität eine standortspezifische N-Ausbringung gewährleistet werden. In Summe zeigte sich, dass NAPS die Düngung an ökonomische und ökologische Faktoren anpasst, indem es aktuelle Sensordaten, historische Ertragsaufzeichnungen und zukünftige Wettervorhersagen zur Ermittlung einer präziseren N-Ausbringung nutzt. Das Konzept hat so das Potenzial, die nachteiligen Auswirkungen einer Überdüngung zu begrenzen, so dass eine umweltfreundlichere Agrarproduktion gewährleistet wird

Contribution of Remote Sensing on Crop Models: A Review

Crop growth models simulate the relationship between plants and the environment to predict the expected yield for applications such as crop management and agronomic decision making, as well as to study the potential impacts of climate change on food security. A major limitation of crop growth models is the lack of spatial information on the actual conditions of each field or region. Remote sensing can provide the missing spatial information required by crop models for improved yield prediction. This paper reviews the most recent information about remote sensing data and their contribution to crop growth models. It reviews the main types, applications, limitations and advantages of remote sensing data and crop models. It examines the main methods by which remote sensing data and crop growth models can be combined. As the spatial resolution of most remote sensing data varies from sub-meter to 1 km, the issue of selecting the appropriate scale is examined in conjunction with their temporal resolution. The expected future trends are discussed, considering the new and planned remote sensing platforms, emergent applications of crop models and their expected improvement to incorporate automatically the increasingly available remotely sensed products