Harmonic Estimation Of Distorted Power Signals Using PSO – Adaline

In recent times, power system harmonics has got a great deal of interest by many Power system Engineers. It is primarily due to the fact that non-linear loads comprise an increasing portion of the total load for a typical industrial plant. This increase in proportion of non-linear load and due to increased use of semi-conductor based power processors by utility companies has detoriated the Power Quality. Harmonics are a mathematical way of describing distortion in voltage or current waveform. The term harmonic refers to a component of a waveform occurs at an integer multiple of the fundamental frequency. Several methods had been proposed, such as discrete Fourier transforms, least square error technique, Kalman filtering, adaptive notch filters etc; Unlike above techniques, which treat harmonic estimation as completely non-linear problem there are some other hybrid techniques like Genetic Algorithm (GA), LS-Adaline, LS-PSOPC which decompose the problem of harmonic estimation into linear and non-linear problem. The results of LS-PSOPC and LS-Adaline has most attractive features of compactness and fastness. . Our new proposed technique tries to reduce the pitfalls in the LS-PSOPC, LS-Adaline techniques. With new technique we tried to estimate the Amplitudes by Least square estimator, frequency of the signal by PSOPC and phases of the harmonics by Adaline technique using MATLAB program. Harmonic signals were estimated by using LS-PSOPC, PSOPC-Adaline. Errors in estimating the signal by both the techniques are calculated and compared with each other

A survey of adaptive components for use in failure-free systems Special technical report no. 1

Component reliability, and failure-free systems for electrochemical cell, magnetic devices, and mercury cell integrato

Memristors for the Curious Outsiders

We present both an overview and a perspective of recent experimental advances and proposed new approaches to performing computation using memristors. A memristor is a 2-terminal passive component with a dynamic resistance depending on an internal parameter. We provide an brief historical introduction, as well as an overview over the physical mechanism that lead to memristive behavior. This review is meant to guide nonpractitioners in the field of memristive circuits and their connection to machine learning and neural computation.Comment: Perpective paper for MDPI Technologies; 43 page

Real-time implementation of a sensor validation scheme for a heavy-duty diesel engine

With ultra-low exhaust emissions standards, heavy-duty diesel engines (HDDEs) are dependent upon a myriad of sensors to optimize power output and exhaust emissions. Apart from acquiring and processing sensor signals, engine control modules should also have capabilities to report and compensate for sensors that have failed. The global objective of this research was to develop strategies to enable HDDEs to maintain nominal in-use performance during periods of sensor failures. Specifically, the work explored the creation of a sensor validation scheme to detect, isolate, and accommodate sensor failures in HDDEs. The scheme not only offers onboard diagnostic (OBD) capabilities, but also control of engine performance in the event of sensor failures. The scheme, known as Sensor Failure Detection Isolation and Accommodation (SFDIA), depends on mathematical models for its functionality. Neural approximators served as the modeling tool featuring online adaptive capabilities. The significance of the SFDIA is that it can enhance an engine management system (EMS) capability to control performance under any operating conditions when sensors fail. The SFDIA scheme updates models during the lifetime of an engine under real world, in-use conditions. The central hypothesis for the work was that the SFDIA scheme would allow continuous normal operation of HDDEs under conditions of sensor failures. The SFDIA was tested using the boost pressure, coolant temperature, and fuel pressure sensors to evaluate its performance. The test engine was a 2004 MackRTM MP7-355E (11 L, 355 hp). Experimental work was conducted at the Engine and Emissions Research Laboratory (EERL) at West Virginia University (WVU). Failure modes modeled were abrupt, long-term drift and intermittent failures. During the accommodation phase, the SFDIA restored engine power up to 0.64% to nominal. In addition, oxides of nitrogen (NOx) emissions were maintained at up to 1.41% to nominal

Memristor-based Synaptic Networks and Logical Operations Using In-Situ Computing

We present new computational building blocks based on memristive devices. These blocks, can be used to implement either supervised or unsupervised learning modules. This is achieved using a crosspoint architecture which is an efficient array implementation for nanoscale two-terminal memristive devices. Based on these blocks and an experimentally verified SPICE macromodel for the memristor, we demonstrate that firstly, the Spike-Timing-Dependent Plasticity (STDP) can be implemented by a single memristor device and secondly, a memristor-based competitive Hebbian learning through STDP using a $1\times 1000$ synaptic network. This is achieved by adjusting the memristor's conductance values (weights) as a function of the timing difference between presynaptic and postsynaptic spikes. These implementations have a number of shortcomings due to the memristor's characteristics such as memory decay, highly nonlinear switching behaviour as a function of applied voltage/current, and functional uniformity. These shortcomings can be addressed by utilising a mixed gates that can be used in conjunction with the analogue behaviour for biomimetic computation. The digital implementations in this paper use in-situ computational capability of the memristor.Comment: 18 pages, 7 figures, 2 table

Deterministic Artificial Intelligence

Kirchhoff’s laws give a mathematical description of electromechanics. Similarly, translational motion mechanics obey Newton’s laws, while rotational motion mechanics comply with Euler’s moment equations, a set of three nonlinear, coupled differential equations. Nonlinearities complicate the mathematical treatment of the seemingly simple action of rotating, and these complications lead to a robust lineage of research culminating here with a text on the ability to make rigid bodies in rotation become self-aware, and even learn. This book is meant for basic scientifically inclined readers commencing with a first chapter on the basics of stochastic artificial intelligence to bridge readers to very advanced topics of deterministic artificial intelligence, espoused in the book with applications to both electromechanics (e.g. the forced van der Pol equation) and also motion mechanics (i.e. Euler’s moment equations). The reader will learn how to bestow self-awareness and express optimal learning methods for the self-aware object (e.g. robot) that require no tuning and no interaction with humans for autonomous operation. The topics learned from reading this text will prepare students and faculty to investigate interesting problems of mechanics. It is the fondest hope of the editor and authors that readers enjoy the book