10,981 research outputs found
Hybrid Satellite-Terrestrial Communication Networks for the Maritime Internet of Things: Key Technologies, Opportunities, and Challenges
With the rapid development of marine activities, there has been an increasing
number of maritime mobile terminals, as well as a growing demand for high-speed
and ultra-reliable maritime communications to keep them connected.
Traditionally, the maritime Internet of Things (IoT) is enabled by maritime
satellites. However, satellites are seriously restricted by their high latency
and relatively low data rate. As an alternative, shore & island-based base
stations (BSs) can be built to extend the coverage of terrestrial networks
using fourth-generation (4G), fifth-generation (5G), and beyond 5G services.
Unmanned aerial vehicles can also be exploited to serve as aerial maritime BSs.
Despite of all these approaches, there are still open issues for an efficient
maritime communication network (MCN). For example, due to the complicated
electromagnetic propagation environment, the limited geometrically available BS
sites, and rigorous service demands from mission-critical applications,
conventional communication and networking theories and methods should be
tailored for maritime scenarios. Towards this end, we provide a survey on the
demand for maritime communications, the state-of-the-art MCNs, and key
technologies for enhancing transmission efficiency, extending network coverage,
and provisioning maritime-specific services. Future challenges in developing an
environment-aware, service-driven, and integrated satellite-air-ground MCN to
be smart enough to utilize external auxiliary information, e.g., sea state and
atmosphere conditions, are also discussed
Fast Cell Discovery in mm-wave 5G Networks with Context Information
The exploitation of mm-wave bands is one of the key-enabler for 5G mobile
radio networks. However, the introduction of mm-wave technologies in cellular
networks is not straightforward due to harsh propagation conditions that limit
the mm-wave access availability. Mm-wave technologies require high-gain antenna
systems to compensate for high path loss and limited power. As a consequence,
directional transmissions must be used for cell discovery and synchronization
processes: this can lead to a non-negligible access delay caused by the
exploration of the cell area with multiple transmissions along different
directions.
The integration of mm-wave technologies and conventional wireless access
networks with the objective of speeding up the cell search process requires new
5G network architectural solutions. Such architectures introduce a functional
split between C-plane and U-plane, thereby guaranteeing the availability of a
reliable signaling channel through conventional wireless technologies that
provides the opportunity to collect useful context information from the network
edge.
In this article, we leverage the context information related to user
positions to improve the directional cell discovery process. We investigate
fundamental trade-offs of this process and the effects of the context
information accuracy on the overall system performance. We also cope with
obstacle obstructions in the cell area and propose an approach based on a
geo-located context database where information gathered over time is stored to
guide future searches. Analytic models and numerical results are provided to
validate proposed strategies.Comment: 14 pages, submitted to IEEE Transaction on Mobile Computin
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Context Information for Fast Cell Discovery in mm-wave 5G Networks
The exploitation of the mm-wave bands is one of the most promising solutions
for 5G mobile radio networks. However, the use of mm-wave technologies in
cellular networks is not straightforward due to mm-wave harsh propagation
conditions that limit access availability. In order to overcome this obstacle,
hybrid network architectures are being considered where mm-wave small cells can
exploit an overlay coverage layer based on legacy technology. The additional
mm-wave layer can also take advantage of a functional split between control and
user plane, that allows to delegate most of the signaling functions to legacy
base stations and to gather context information from users for resource
optimization. However, mm-wave technology requires high gain antenna systems to
compensate for high path loss and limited power, e.g., through the use of
multiple antennas for high directivity. Directional transmissions must be also
used for the cell discovery and synchronization process, and this can lead to a
non-negligible delay due to the need to scan the cell area with multiple
transmissions at different directions. In this paper, we propose to exploit the
context information related to user position, provided by the separated control
plane, to improve the cell discovery procedure and minimize delay. We
investigate the fundamental trade-offs of the cell discovery process with
directional antennas and the effects of the context information accuracy on its
performance. Numerical results are provided to validate our observations.Comment: 6 pages, 8 figures, in Proceedings of European Wireless 201
- …