Stabilising the networked control systems involving actuation and measurement consecutive packet losses

© 2016 The Institution of Engineering and Technology. This study is devoted to the problem of designing a robust output-feedback discrete-time sliding mode control (ODSMC) for the networked systems involving both measuring and actuating data packet losses. Packet losses in the networked control systems (NCSs) have been modelled by utilising the probability and the characteristics of the sources and the destinations. Here, the well-known Bernoulli random binary distribution is used to model consecutive packet losses in the NCSs. In this study, first, a robust observer-based discrete-time sliding mode control is proposed for the NCSs including random packet losses. The packet losses occur in the channels from the sensors to the controller and the channels from the controller to the actuators. Then, using the notion of exponential mean square stability, the boundedness of the obtained closed-loop system is analysed with a linear matrix inequality approach. Our proposed robust ODSMC can be applied to unstable NCSs, and there is no need to stabilise the underlying system in advance. Illustrative examples are presented to show the effectiveness of the proposed approach

Design of Wireless Communication Networks for Cyber-Physical Systems with Application to Smart Grid

Cyber-Physical Systems (CPS) are the next generation of engineered systems in which computing, communication, and control technologies are tightly integrated. On one hand, CPS are generally large with components spatially distributed in physical world that has lots of dynamics; on the other hand, CPS are connected, and must be robust and responsive. Smart electric grid, smart transportation system are examples of emerging CPS that have significant and far-reaching impact on our daily life. In this dissertation, we design wireless communication system for CPS. To make CPS robust and responsive, it is critical to have a communication subsystem that is reliable, adaptive, and scalable. Our design uses a layered structure, which includes physical layer, multiple access layer, network layer, and application layer. Emphases are placed on multiple access and network layer. At multiple access layer, we have designed three approaches, namely compressed multiple access, sample-contention multiple access, and prioritized multiple access, for reliable and selective multiple access. At network layer, we focus on the problem of creating reliable route, with service interruption anticipated. We propose two methods: the first method is a centralized one that creates backup path around zones posing high interruption risk; the other method is a distributed one that utilizes Ant Colony Optimization (ACO) and positive feedback, and is able to update multipath dynamically. Applications are treated as subscribers to the data service provided by the communication system. Their data quality requirements and Quality of Service (QoS) feedback are incorporated into cross-layer optimization in our design. We have evaluated our design through both simulation and testbed. Our design demonstrates desired reliability, scalability and timeliness in data transmission. Performance gain is observed over conventional approaches as such random access

Resource allocation and congestion control strategies for networked unmanned systems

It is generally agreed that communication is a critical technological factor in designing networked unmanned systems (NUS) that consist of a large number of heterogeneous assets/nodes that may be configured in ad-hoc fashion and that incorporate intricate architectures. In order to successfully carry out the NUS missions, communication among assets need to be accomplished efficiently. In contrast with conventional networks, NUSs have specific features that may render communication more complex. The main distinct characteristics of NUS are as follows: (a) heterogeneity of assets in terms of resources, (b) multiple topologies that can be fully-connected, (c) real-time requirements imposed by delivery timeliness of messages under evolving and uncertain environments, (d) unknown and random time-delays that may degrade the closed-loop dynamics performance, (e) bandwidth constraints reflecting differences in assets behavior and dynamics, and (f) protocol limitations for complying with the wireless features of these networks. The NUS system consists of clusters each having three nodes, namely, a sensor, a decision-maker, and an actuator. Inspired by networked control systems (NCS), we introduced a generic framework for NUSs. Using the fluid flow model (FFM), the overall dynamical model of our network cluster is derived as a time-delay dependent system. The following three main issues are investigated in this thesis, bandwidth allocation, an integrated bandwidth allocation and flow rate control, and congestion control. To demonstrate the difficulty of addressing the bandwidth allocation control problem, a standard PID is implemented for our network cluster. It is shown that in presence of feedback loops and time-delays in the network, this controller induces flow oscillations and consequently, in the worst-case scenario, network instability. To address this problem, nonlinear control strategies are proposed instead. These strategies are evaluated subject to presence of unknown delays and measurable/estimated input traffic. For different network configurations, the error dynamics of the entire controlled cluster is derived and sufficient stability conditions are obtained. In addition, our proposed bandwidth allocation control strategy is evaluated when the NUS assets are assumed to be mobile. The bandwidth allocation problem is often studied in an integrated fashion with the flow rate control and the connection admission control (CAC). In fact, due to importance of interaction of various components, design of the entire control system is often more promising than optimization of individual components. In this thesis, several robust integrated bandwidth allocation and flow rate control strategies are proposed. The third issue that is investigated in this thesis is the congestion control for differentiated-services (DiffServ) networks. In our proposed congestion control strategies, the buffer queue length is used as a feedback information to control locally the queue length of each buffer by acting on the bandwidth and simultaneously a feedback signaling notifies the ordinary sources regarding the allowed maximum rate. Using sliding mode generalized variable structure control techniques (SM-GVSC), two congestion control approaches are proposed, namely, the non degenerate and degenerate GVS control approaches. By adopting decentralized end-to-end, semi-decentralized end-to-end, and distributed hop-by-hop control approaches, our proposed congestion control strategies are investigated for a DiffServ loopless mesh network (Internet) and a DiffServ fully-connected NUS. Contrary to the semi-decentralized end-to-end congestion control strategy, in the distributed hop-by-hop congestion control strategy, each output port controller communicates the maximum allowed flow rate only to its immediate upstream node(s) and/or source(s). This approach reduces the required amount of information in the flow control when Compared to other approaches in which the allowed flow rate is sent to all the upstream sources communicating through an output port