Micro position control of a designed 3-PRR compliant mechanism using experimental models

A new compliant stage based on 3-PRR kinematic structure is designed to be used as a planar micro positioner. The mechanism is actuated by using piezoelectric actuators and center position of the stage is measured using a dual laser position sensor. It's seen that manufactured mechanism has unpredictable motion errors due to manufacturing and assembly faults. Thus, sliding mode control with disturbance observer is chosen to be implemented as position control in x-y axes of the center of the mechanism. Instead of piezoelectric actuator models, experimental models are extracted for each actuation direction in order to be used as nominal plants for the disturbance observer. The position control results are compared with the previous position control using linear piezoelectric actuator models and it's seen that the implemented control methodology is better in terms of errors in x and y axes. Besides, the position errors are lowered down to ±0.06 microns, which is the accuracy of the dual laser position sensor

Sliding-mode control of a flexure based mechanism using piezoelectric actuators

The position control of designed 3 PRR flexure based mechanism is examined in this paper. The aims of the work are to eliminate the parasitic motions of the stage, misalignments of the actuators, errors of manufacturing and hysteresis of the system by having a redundant mechanism with the implementation of a sliding mode control and a disturbance observe. x-y motion of the end-effector is measured by using a laser position sensor and the necessary references for the piezoelectric actuators are calculated using the pseudo inverse of the transformation matrix coming from the experimentally determined kinematics of the mechanism. The effect of the observer and closed loop control is presented by comparing the results with open loop control. The system is designed to be redundant to enhance the position control. In order to see the effects of the redundant system firstly the closed loop control for active 2 piezoelectric actuators experiments then for active 3 piezoelectric actuators experiments are presented. As a result, our redundant mechanism tracks the desired trajectory accurately and its workspace is bigger

Micro position control of a 3-RRR compliant mechanism

A 3-RRR compliant mechanism is designed to be used as a micro positioning stage. The stage displacements are analyzed by using structural FEA. However the experimental results for the manufactured mechanism are not compatible with the FEA which are mostly accepted as ideal while designing. A position control using Sliding Mode Control with Disturbance Observer is proposed for the reference tracking of the center of the stage. The motion of the center is measured by using a laser position sensor and the necessary references for the piezoelectric actuators are calculated using the pseudo inverse of the transformation matrix coming from the experimentally determined kinematics of the mechanism. Piezoelectric actuator linear models are used for disturbance rejection. Finally, the position control of the mechanism is succeeded although it has big errors in manufacturing, assembly etc

Parallel Manipulators

In recent years, parallel kinematics mechanisms have attracted a lot of attention from the academic and industrial communities due to potential applications not only as robot manipulators but also as machine tools. Generally, the criteria used to compare the performance of traditional serial robots and parallel robots are the workspace, the ratio between the payload and the robot mass, accuracy, and dynamic behaviour. In addition to the reduced coupling effect between joints, parallel robots bring the benefits of much higher payload-robot mass ratios, superior accuracy and greater stiffness; qualities which lead to better dynamic performance. The main drawback with parallel robots is the relatively small workspace. A great deal of research on parallel robots has been carried out worldwide, and a large number of parallel mechanism systems have been built for various applications, such as remote handling, machine tools, medical robots, simulators, micro-robots, and humanoid robots. This book opens a window to exceptional research and development work on parallel mechanisms contributed by authors from around the world. Through this window the reader can get a good view of current parallel robot research and applications

Kinematic Performance Measures and Optimization of Parallel Kinematics Manipulators: A Brief Review

This chapter covers a number of kinematic performance indices that are instrumental in designing parallel kinematics manipulators. These indices can be used selectively based on manipulator requirements and functionality. This would provide the very practical tool for designers to approach their needs in a very comprehensive fashion. Nevertheless, most applications require a more composite set of requirements that makes optimizing performance more challenging. The later part of this chapter will discuss single-objective and multi-objectives optimization that could handle certain performance indices or a combination of them. A brief description of most common techniques in the literature will be provided

A planar 3-DOF nanopositioning platform with large magnification

AbstractPiezo-actuated flexure-based precision positioning platforms have been widely used in micro/nano manipulation. A conventional major challenge is the trade-off between high rigidity, large magnification, high-precision tracking, and high-accuracy positioning. A compact planar three-degrees-of-freedom (3-DOF) nanopositioning platform is described in which three two-level lever amplifiers are arranged symmetrically to achieve large magnification. The parallel-kinematic configuration with optimised sizes increases the rigidity. Displacement loss models (DLM) are proposed for the external preload port of the actuator, the input port of the platform and the flexible lever mechanism. The kinematic and dynamic modelling accuracies are improved by the compensation afforded by the three DLMs. Experimental results validate the proposed design and modelling methods. The proposed platform possesses high rigidity, large magnification, high-precision circle tracking and high-accuracy positioning

SmallKat MQP

The SmallKat MQP is providing a quadrupedal robotic platform to help research and design new gaits, test sensors, and teach engineering students. Current options limit small companies, universities, and hobbyists due to their complexity, large size, and immense cost. SmallKat is a low-cost robotic platform with customizability and adaptability in mind. To allow for a multitude of gait designs, it is designed with 4-DoF legs controlled by powerful custom servo motors, 9-DoF IMUs, and custom microcontrollers. The body is constructed using additive manufacturing with PLA plastics, and even has a continuum tail for added body control. The higher level controller runs on a single-board computer for added performance when computing kinematics and dynamics, and controlling different gaits