A Speech Distortion and Interference Rejection Constraint Beamformer

Signals captured by a set of microphones in a speech communication system are mixtures of desired and undesired signals and ambient noise. Existing beamformers can be divided into those that preserve or distort the desired signal. Beamformers that preserve the desired signal are, for example, the linearly constrained minimum variance (LCMV) beamformer that is supposed, ideally, to reject the undesired signal and reduce the ambient noise power, and the minimum variance distortionless response (MVDR) beamformer that reduces the interference-plus-noise power. The multichannel Wiener filter, on the other hand, reduces the interference-plus-noise power without preserving the desired signal. In this paper, a speech distortion and interference rejection constraint (SDIRC) beamformer is derived that minimizes the ambient noise power subject to specific constraints that allow a tradeoff between speech distortion and interference-plus-noise reduction on the one hand, and undesire d signal and ambient noise reductions on the other hand. Closed-form expressions for the performance measures of the SDIRC beamformer are derived and the relations to the aforementioned beamformers are derived. The performance evaluation demonstrates the tradeoffs that can be made using the SDIRC beamformer

Robust Multichannel Microphone Beamforming

In this thesis, a method for the design and implementation of a spatially robust multichannel microphone beamforming system is presented. A set of spatial correlation functions are derived for 2D and 3D far-field/near-field scenarios based on von Mises(-Fisher), Gaussian, and uniform source location distributions. These correlation functions are used to design spatially robust beamformers and blocking beamformers (nullformers) designed to enhance or suppress a known source, where the target source location is not perfectly known due to either an incorrect location estimate or movement of the target while the beamformers are active. The spatially robust beam/null-formers form signal and interferer plus noise references which can be further processed via a blind source separation algorithm to remove mutual components - removing the interference and sensor noise from the signal path and vice versa. The noise reduction performance of the combined beamforming and blind source separation system approaches that of a perfect information MVDR beamformer under reverberant conditions. It is demonstrated that the proposed algorithm can be implemented on low-power hardware with good performance on hardware similar to current mobile platforms using a four-element microphone array

Implementation and evaluation of a low complexity microphone array for speaker recognition

Includes bibliographical references (leaves 83-86).This thesis discusses the application of a microphone array employing a noise canceling beamforming technique for improving the robustness of speaker recognition systems in a diffuse noise field

Adaptive array processing for multiple microphone hearing aids

Also issued as Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1989.Includes bibliographical references.Supported in part by the National Institutes of Neurological and Communicative Disorders and Stroke of the National Institutes of Health. RO1-NS21322Patrick M. Peterson

A Study into Speech Enhancement Techniques in Adverse Environment

This dissertation developed speech enhancement techniques that improve the speech quality in applications such as mobile communications, teleconferencing and smart loudspeakers. For these applications it is necessary to suppress noise and reverberation. Thus the contribution in this dissertation is twofold: single channel speech enhancement system which exploits the temporal and spectral diversity of the received microphone signal for noise suppression and multi-channel speech enhancement method with the ability to employ spatial diversity to reduce reverberation

Interference Suppression for Spread Spectrum Signals Using Adaptive Beamforming and Adaptive Temporal Filter

Interference and jamming signals are a serious concern in an operational military communication environment. This thesis examines the utility and performance of combining adaptive temporal filtering with adaptive spatial filtering (i.e. adaptive beamforming) to improve the signal-to-jammer ratio (SJR) in the presence of narrowband and wideband interference. Adaptive temporal filters are used for narrowband interference suppression while adaptive beamforming is used to suppress wideband interference signals. A procedure is presented for the design and implementation of a linear constraints minimum variance generalized sidelobe canceler (LCMV-GSC) beamformer. The adaptive beamformer processes the desired signal with unity gain while simultaneously and adaptively minimizing the output due to any undesired signal. Using the LCMV-GSC beamformer with a least mean squares (LMS) adaptive algorithm, it was shown that the tapped delay line (TDL) adaptive antenna array is more effective for the suppression of wideband jammer suppression than the linear array sensors (LAS) adaptive antenna array. Also a new technique for adaptive beamforming is presented which improves wideband interference suppression in a frequency-hopped environment. The output SJR improvement for the new technique compared to the conventional technique is as much as 15dB. Sometimes, multipath signals and jammers generated by a smart enemy are correlated with the desired signal which destroys the traditional beamformer\u27s performance. After performing a spatial smoothing technique, adaptive beamforming can also be effective in suppressing the jamming signals that are highly correlated with the desired signal

MVDR broadband beamforming using polynomial matrix techniques

This thesis addresses the formulation of and solution to broadband minimum variance distortionless response (MVDR) beamforming. Two approaches to this problem are considered, namely, generalised sidelobe canceller (GSC) and Capon beamformers. These are examined based on a novel technique which relies on polynomial matrix formulations. The new scheme is based on the second order statistics of the array sensor measurements in order to estimate a space-time covariance matrix. The beamforming problem can be formulated based on this space-time covariance matrix. Akin to the narrowband problem, where an optimum solution can be derived from the eigenvalue decomposition (EVD) of a constant covariance matrix, this utility is here extended to the broadband case. The decoupling of the space-time covariance matrix in this case is provided by means of a polynomial matrix EVD. The proposed approach is initially exploited to design a GSC beamformer for a uniform linear array, and then extended to the constrained MVDR, or Capon, beamformer and also the GSC with an arbitrary array structure. The uniqueness of the designed GSC comes from utilising the polynomial matrix technique, and its ability to steer the array beam towards an off-broadside direction without the pre-steering stage that is associated with conventional approaches to broadband beamformers. To solve the broadband beamforming problem, this thesis addresses a number of additional tools. A first one is the accurate construction of both the steering vectors based on fractional delay filters, which are required for the broadband constraint formulation of a beamformer, as for the construction of the quiescent beamformer. In the GSC case, we also discuss how a block matrix can be obtained, and introduce a novel paraunitary matrix completion algorithm. For the Capon beamformer, the polynomial extension requires the inversion of a polynomial matrix, for which a residue-based method is proposed that offers better accuracy compared to previously utilised approaches. These proposed polynomial matrix techniques are evaluated in a number of simulations. The results show that the polynomial broadband beamformer (PBBF) steersthe main beam towards the direction of the signal of interest (SoI) and protects the signal over the specified bandwidth, and at the same time suppresses unwanted signals by placing nulls in their directions. In addition to that, the PBBF is compared to the standard time domain broadband beamformer in terms of their mean square error performance, beam-pattern, and computation complexity. This comparison shows that the PBBF can offer a significant reduction in computation complexity compared to its standard counterpart. Overall, the main benefits of this approach include beam steering towards an arbitrary look direction with no need for pre-steering step, and a potentially significant reduction in computational complexity due to the decoupling of dependencies of the quiescent beamformer, blocking matrix, and the adaptive filter compared to a standard broadband beamformer implementation.This thesis addresses the formulation of and solution to broadband minimum variance distortionless response (MVDR) beamforming. Two approaches to this problem are considered, namely, generalised sidelobe canceller (GSC) and Capon beamformers. These are examined based on a novel technique which relies on polynomial matrix formulations. The new scheme is based on the second order statistics of the array sensor measurements in order to estimate a space-time covariance matrix. The beamforming problem can be formulated based on this space-time covariance matrix. Akin to the narrowband problem, where an optimum solution can be derived from the eigenvalue decomposition (EVD) of a constant covariance matrix, this utility is here extended to the broadband case. The decoupling of the space-time covariance matrix in this case is provided by means of a polynomial matrix EVD. The proposed approach is initially exploited to design a GSC beamformer for a uniform linear array, and then extended to the constrained MVDR, or Capon, beamformer and also the GSC with an arbitrary array structure. The uniqueness of the designed GSC comes from utilising the polynomial matrix technique, and its ability to steer the array beam towards an off-broadside direction without the pre-steering stage that is associated with conventional approaches to broadband beamformers. To solve the broadband beamforming problem, this thesis addresses a number of additional tools. A first one is the accurate construction of both the steering vectors based on fractional delay filters, which are required for the broadband constraint formulation of a beamformer, as for the construction of the quiescent beamformer. In the GSC case, we also discuss how a block matrix can be obtained, and introduce a novel paraunitary matrix completion algorithm. For the Capon beamformer, the polynomial extension requires the inversion of a polynomial matrix, for which a residue-based method is proposed that offers better accuracy compared to previously utilised approaches. These proposed polynomial matrix techniques are evaluated in a number of simulations. The results show that the polynomial broadband beamformer (PBBF) steersthe main beam towards the direction of the signal of interest (SoI) and protects the signal over the specified bandwidth, and at the same time suppresses unwanted signals by placing nulls in their directions. In addition to that, the PBBF is compared to the standard time domain broadband beamformer in terms of their mean square error performance, beam-pattern, and computation complexity. This comparison shows that the PBBF can offer a significant reduction in computation complexity compared to its standard counterpart. Overall, the main benefits of this approach include beam steering towards an arbitrary look direction with no need for pre-steering step, and a potentially significant reduction in computational complexity due to the decoupling of dependencies of the quiescent beamformer, blocking matrix, and the adaptive filter compared to a standard broadband beamformer implementation