13,942 research outputs found
Unbalanced load flow with hybrid wavelet transform and support vector machine based Error-Correcting Output Codes for power quality disturbances classification including wind energy
Purpose. The most common methods to designa multiclass classification consist to determine a set of binary classifiers and to combine them. In this paper support vector machine with Error-Correcting Output Codes (ECOC-SVM) classifier is proposed to classify and characterize the power qualitydisturbances such as harmonic distortion,voltage sag, and voltage swell include wind farms generator in power transmission systems. Firstly three phases unbalanced load flow analysis is executed to calculate difference electric network characteristics, levels of voltage, active and reactive power. After, discrete wavelet transform is combined with the probabilistic ECOC-SVM model to construct the classifier. Finally, the ECOC-SVM classifies and identifies the disturbance type according tothe energy deviation of the discrete wavelet transform. The proposedmethod gives satisfactory accuracy with 99.2% compared with well known methods and shows that each power quality disturbances has specific deviations from the pure sinusoidal waveform,this is good at recognizing and specifies the type of disturbance generated from the wind
power generator.ΠΠ°ΠΈΠ±ΠΎΠ»Π΅Π΅ ΡΠ°ΡΠΏΡΠΎΡΡΡΠ°Π½Π΅Π½Π½ΡΠ΅ ΠΌΠ΅ΡΠΎΠ΄Ρ ΠΏΠΎΡΡΡΠΎΠ΅Π½ΠΈΡ ΠΌΡΠ»ΡΡΠΈΠΊΠ»Π°ΡΡΠΎΠ²ΠΎΠΉ ΠΊΠ»Π°ΡΡΠΈΡΠΈΠΊΠ°ΡΠΈΠΈ Π·Π°ΠΊΠ»ΡΡΠ°ΡΡΡΡ Π² ΠΎΠΏΡΠ΅Π΄Π΅Π»Π΅Π½ΠΈΠΈ Π½Π°Π±ΠΎΡΠ° Π΄Π²ΠΎΠΈΡΠ½ΡΡ
ΠΊΠ»Π°ΡΡΠΈΡΠΈΠΊΠ°ΡΠΎΡΠΎΠ² ΠΈ ΠΈΡ
ΠΎΠ±ΡΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΠΈ. Π Π΄Π°Π½Π½ΠΎΠΉ ΡΡΠ°ΡΡΠ΅ ΠΏΡΠ΅Π΄Π»ΠΎΠΆΠ΅Π½Π° ΠΌΠ°ΡΠΈΠ½Π° ΠΎΠΏΠΎΡΠ½ΡΡ
Π²Π΅ΠΊΡΠΎΡΠΎΠ² Ρ ΠΊΠ»Π°ΡΡΠΈΡΠΈΠΊΠ°ΡΠΎΡΠΎΠΌ Π²ΡΡ
ΠΎΠ΄Π½ΡΡ
ΠΊΠΎΠ΄ΠΎΠ² ΠΈΡΠΏΡΠ°Π²Π»Π΅Π½ΠΈΡ ΠΎΡΠΈΠ±ΠΎΠΊ(ECOC-SVM) Ρ ΡΠ΅Π»ΡΡ ΠΊΠ»Π°ΡΡΠΈΡΠΈΡΠΈΡΠΎΠ²Π°ΡΡ ΠΈ Ρ
Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΠ·ΠΎΠ²Π°ΡΡ ΡΠ°ΠΊΠΈΠ΅ Π½Π°ΡΡΡΠ΅Π½ΠΈΡ ΠΊΠ°ΡΠ΅ΡΡΠ²Π° ΡΠ»Π΅ΠΊΡΡΠΎΡΠ½Π΅ΡΠ³ΠΈΠΈ, ΠΊΠ°ΠΊ Π³Π°ΡΠΌΠΎΠ½ΠΈΡΠ΅ΡΠΊΠΈΠ΅ ΠΈΡΠΊΠ°ΠΆΠ΅Π½ΠΈΡ, ΠΏΠ°Π΄Π΅Π½ΠΈΠ΅ Π½Π°ΠΏΡΡΠΆΠ΅Π½ΠΈΡ ΠΈ ΡΠΊΠ°ΡΠΎΠΊ Π½Π°ΠΏΡΡΠΆΠ΅Π½ΠΈΡ, Π²ΠΊΠ»ΡΡΠ°Ρ Π³Π΅Π½Π΅ΡΠ°ΡΠΎΡ Π²Π΅ΡΡΠΎΠ²ΡΡ
ΡΠ»Π΅ΠΊΡΡΠΎΡΡΠ°Π½ΡΠΈΠΉ Π² ΡΠΈΡΡΠ΅ΠΌΠ°Ρ
ΠΏΠ΅ΡΠ΅Π΄Π°ΡΠΈ ΡΠ»Π΅ΠΊΡΡΠΎΡΠ½Π΅ΡΠ³ΠΈΠΈ. Π‘Π½Π°ΡΠ°Π»Π° Π²ΡΠΏΠΎΠ»Π½ΡΠ΅ΡΡΡ Π°Π½Π°Π»ΠΈΠ· ΠΏΠΎΡΠΎΠΊΠ° Π½Π΅ΡΠΈΠΌΠΌΠ΅ΡΡΠΈΡΠ½ΠΎΠΉ Π½Π°Π³ΡΡΠ·ΠΊΠΈ ΡΡΠ΅Ρ
ΡΠ°Π· Π΄Π»Ρ ΡΠ°ΡΡΠ΅ΡΠ° ΡΠ°Π·Π½ΠΎΡΡΠ½ΡΡ
Ρ
Π°ΡΠ°ΠΊΡΠ΅ΡΠΈΡΡΠΈΠΊ ΡΠ»Π΅ΠΊΡΡΠΈΡΠ΅ΡΠΊΠΎΠΉ ΡΠ΅ΡΠΈ, ΡΡΠΎΠ²Π½Π΅ΠΉ Π½Π°ΠΏΡΡΠΆΠ΅Π½ΠΈΡ, Π°ΠΊΡΠΈΠ²Π½ΠΎΠΉ ΠΈ ΡΠ΅Π°ΠΊΡΠΈΠ²Π½ΠΎΠΉ ΠΌΠΎΡΠ½ΠΎΡΡΠΈ. ΠΠΎΡΠ»Π΅ ΡΡΠΎΠ³ΠΎ Π΄ΠΈΡΠΊΡΠ΅ΡΠ½ΠΎΠ΅ Π²Π΅ΠΉΠ²Π»Π΅Ρ-ΠΏΡΠ΅ΠΎΠ±ΡΠ°Π·ΠΎΠ²Π°Π½ΠΈΠ΅ ΠΎΠ±ΡΠ΅Π΄ΠΈΠ½ΡΠ΅ΡΡΡ Ρ Π²Π΅ΡΠΎΡΡΠ½ΠΎΡΡΠ½ΠΎΠΉ ΠΌΠΎΠ΄Π΅Π»ΡΡ ECOC-SVM Π΄Π»Ρ ΠΏΠΎΡΡΡΠΎΠ΅Π½ΠΈΡ ΠΊΠ»Π°ΡΡΠΈΡΠΈΠΊΠ°ΡΠΎΡΠ°. ΠΠ°ΠΊΠΎΠ½Π΅Ρ, ECOC-SVM ΠΊΠ»Π°ΡΡΠΈΡΠΈΡΠΈΡΡΠ΅Ρ ΠΈ ΠΈΠ΄Π΅Π½ΡΠΈΡΠΈΡΠΈΡΡΠ΅Ρ ΡΠΈΠΏ Π²ΠΎΠ·ΠΌΡΡΠ΅Π½ΠΈΡ Π² ΡΠΎΠΎΡΠ²Π΅ΡΡΡΠ²ΠΈΠΈ Ρ ΠΎΡΠΊΠ»ΠΎΠ½Π΅Π½ΠΈΠ΅ΠΌ ΡΠ½Π΅ΡΠ³ΠΈΠΈ Π΄ΠΈΡΠΊΡΠ΅ΡΠ½ΠΎΠ³ΠΎ Π²Π΅ΠΉΠ²Π»Π΅Ρ-ΠΏΡΠ΅ΠΎΠ±ΡΠ°Π·ΠΎΠ²Π°Π½ΠΈΡ. ΠΡΠ΅Π΄Π»ΠΎΠΆΠ΅Π½Π½ΡΠΉ ΠΌΠ΅ΡΠΎΠ΄ Π΄Π°Π΅Ρ ΡΠ΄ΠΎΠ²Π»Π΅ΡΠ²ΠΎΡΠΈΡΠ΅Π»ΡΠ½ΡΡ ΡΠΎΡΠ½ΠΎΡΡΡ 99,2% ΠΏΠΎ ΡΡΠ°Π²Π½Π΅Π½ΠΈΡ Ρ Ρ
ΠΎΡΠΎΡΠΎ ΠΈΠ·Π²Π΅ΡΡΠ½ΡΠΌΠΈ ΠΌΠ΅ΡΠΎΠ΄Π°ΠΌΠΈ ΠΈ ΠΏΠΎΠΊΠ°Π·ΡΠ²Π°Π΅Ρ, ΡΡΠΎ ΠΊΠ°ΠΆΠ΄ΠΎΠ΅ Π½Π°ΡΡΡΠ΅Π½ΠΈΠ΅ ΠΊΠ°ΡΠ΅ΡΡΠ²Π° ΡΠ»Π΅ΠΊΡΡΠΎΡΠ½Π΅ΡΠ³ΠΈΠΈ ΠΈΠΌΠ΅Π΅Ρ ΠΎΠΏΡΠ΅Π΄Π΅Π»Π΅Π½Π½ΡΠ΅ ΠΎΡΠΊΠ»ΠΎΠ½Π΅Π½ΠΈΡ ΠΎΡ ΡΠΈΡΡΠΎ ΡΠΈΠ½ΡΡΠΎΠΈΠ΄Π°Π»ΡΠ½ΠΎΠΉ ΡΠΎΡΠΌΡ Π²ΠΎΠ»Π½Ρ, ΡΡΠΎ ΡΠΏΠΎΡΠΎΠ±ΡΡΠ²ΡΠ΅Ρ ΡΠ°ΡΠΏΠΎΠ·Π½Π°Π²Π°Π½ΠΈΡ ΠΈ ΠΎΠΏΡΠ΅Π΄Π΅Π»Π΅Π½ΠΈΡ ΡΠΈΠΏΠ° Π²ΠΎΠ·ΠΌΡΡΠ΅Π½ΠΈΡ, Π³Π΅Π½Π΅ΡΠΈΡΡΠ΅ΠΌΠΎΠ³ΠΎ Π²Π΅ΡΡΠΎΠ²ΡΠΌ Π³Π΅Π½Π΅ΡΠ°ΡΠΎΡΠΎΠΌ
Cause Identification of Electromagnetic Transient Events using Spatiotemporal Feature Learning
This paper presents a spatiotemporal unsupervised feature learning method for
cause identification of electromagnetic transient events (EMTE) in power grids.
The proposed method is formulated based on the availability of
time-synchronized high-frequency measurement, and using the convolutional
neural network (CNN) as the spatiotemporal feature representation along with
softmax function. Despite the existing threshold-based, or energy-based events
analysis methods, such as support vector machine (SVM), autoencoder, and
tapered multi-layer perception (t-MLP) neural network, the proposed feature
learning is carried out with respect to both time and space. The effectiveness
of the proposed feature learning and the subsequent cause identification is
validated through the EMTP simulation of different events such as line
energization, capacitor bank energization, lightning, fault, and high-impedance
fault in the IEEE 30-bus, and the real-time digital simulation (RTDS) of the
WSCC 9-bus system.Comment: 9 pages, 7 figure
Fault Location in Power Distribution Systems via Deep Graph Convolutional Networks
This paper develops a novel graph convolutional network (GCN) framework for
fault location in power distribution networks. The proposed approach integrates
multiple measurements at different buses while taking system topology into
account. The effectiveness of the GCN model is corroborated by the IEEE 123 bus
benchmark system. Simulation results show that the GCN model significantly
outperforms other widely-used machine learning schemes with very high fault
location accuracy. In addition, the proposed approach is robust to measurement
noise and data loss errors. Data visualization results of two competing neural
networks are presented to explore the mechanism of GCN's superior performance.
A data augmentation procedure is proposed to increase the robustness of the
model under various levels of noise and data loss errors. Further experiments
show that the model can adapt to topology changes of distribution networks and
perform well with a limited number of measured buses.Comment: Accepcted by IEEE Journal on Selected Areas in Communicatio
A Review of Fault Diagnosing Methods in Power Transmission Systems
Transient stability is important in power systems. Disturbances like faults need to be segregated to restore transient stability. A comprehensive review of fault diagnosing methods in the power transmission system is presented in this paper. Typically, voltage and current samples are deployed for analysis. Three tasks/topics; fault detection, classification, and location are presented separately to convey a more logical and comprehensive understanding of the concepts. Feature extractions, transformations with dimensionality reduction methods are discussed. Fault classification and location techniques largely use artificial intelligence (AI) and signal processing methods. After the discussion of overall methods and concepts, advancements and future aspects are discussed. Generalized strengths and weaknesses of different AI and machine learning-based algorithms are assessed. A comparison of different fault detection, classification, and location methods is also presented considering features, inputs, complexity, system used and results. This paper may serve as a guideline for the researchers to understand different methods and techniques in this field
Support Vector Regression Based S-transform for Prediction of Single and Multiple Power Quality Disturbances
This paper presents a novel approach using Support Vector Regression (SVR) based
S-transform to predict the classes of single and multiple power quality disturbances in a
three-phase industrial power system. Most of the power quality disturbances recorded in an
industrial power system are non-stationary and comprise of multiple power quality
disturbances that coexist together for only a short duration in time due to the contribution
of the network impedances and types of customersβ connected loads. The ability to detect
and predict all the types of power quality disturbances encrypted in a voltage signal is vital
in the analyses on the causes of the power quality disturbances and in the identification of
incipient fault in the networks. In this paper, the performances of two types of SVR based
S-transform, the non-linear radial basis function (RBF) SVR based S-transform and the
multilayer perceptron (MLP) SVR based S-transform, were compared for their abilities in
making prediction for the classes of single and multiple power quality disturbances. The
results for the analyses of 651 numbers of single and multiple voltage disturbances gave
prediction accuracies of 86.1% (MLP SVR) and 93.9% (RBF SVR) respectively.
Keywords: Power Quality, Power Quality Prediction, S-transform, SVM, SV
- β¦