Sliding modes in power electronics and motion control

In the paper the general approach to motion control systems in the sliding mode framework is discussed in details. It has been shown that, due to the fact that a motion control system with n d.o.f may be mathematically formulated in a unique way as a system composed on n 2 d.o.f systems, design of such a system may be formulated in a unique way as a requirement that the generalized coordinates must satisfy certain algebraic constrain. Such a formulation leads naturally to sliding mode methods to be applied where sliding mode manifolds are selected to coincide with desired constraints on the generalized coordinates. In addition to the above problem the design of full observer for IM based drive is discussed

Offset-free feedback linearisation control of a three-phase grid-connected photovoltaic system

In this study, a state feedback control law is combined with a disturbance observer to enhance disturbance rejection capability of a grid-connected photovoltaic (PV) inverter. The control law is based on input-output feedback linearisation technique, while the existing disturbance observer is simplified and adopted for the system under investigation. The resulting control law has a proportional-integral (PI)/almost PI-derivative-like structure, which is convenient for real-time implementation. The objective of the proposed approach is to improve the DC-bus voltage regulation, while at the same time control the power exchange between the PV system and the grid. The stability of the closed-loop system under the composite controller is guaranteed by simple design parameters. Both simulation and experimental results show that the proposed method has significant abilities to initiate fast current control and accurate adjustment of the DC-bus voltage under model uncertainty and external disturbance

Voltage balancing in three-level neutral-point-clamped converters via Luenberger observer

This paper addresses the problems associated with the dc-link capacitor voltages of the three-level neutral-point-clamped power converter: the imbalance of the capacitor voltages as well as the presence of an ac-voltage low-frequency oscillation in the dc link of the converter. In order to cope with them, a mathematical analysis of the capacitor voltage difference dynamics, based on a direct average continuous model, is carried out, considering a singular perturbation approach. The analysis leads to a final expression where a sinusoidal disturbance appears explicitly. Consequently, the two problems can be handled together using the ordinary formulation of a problem of regulating the output of a system subject to sinusoidal disturbances, applying classical control theory to design the controller. In this way, the controller is designed including the disturbance estimate provided by a Luenberger observer to asymptotically cancel the disturbance, while keeping also balanced the capacitor voltages. Experiments for a synchronous three-level neutral-point-clamped converter prototype are carried out to evaluate the performance and usefulness of the converter working as a grid-connected inverter under the proposed control law.MICINN-FEDER DPI2009-09661Junta de Andalucía P07-TIC-0299

Asymptotic rejection of sinusoidal disturbances based voltage balance control in back-to-back power converters

This paper addresses the imbalance problem of the dc-link capacitor voltages in the three-level diode-clamped back-to-back power converter. In order to cope with it, a mathematical analysis of the capacitor voltage difference dynamics, based on a continuous model of the converter, is first carried out. It leads to an approximated model which contains explicitly several sinusoidal functions of time. In view of this result, the voltage imbalance phenomenon can be addressed as an output regulation problem, considering the sinusoidal functions as exogenous disturbances. Thus, a novel approach to deal with the mentioned problem in the back- to-back converter is presented. Then, the particular features of the disturbances are used to design several controllers. They all follow an asymptotic disturbance rejection approach. In this way, the estimations of the disturbances are used to apply a control law that cancels them while regulating the capacitor voltage balance as well. Finally, the performance of the proposed control laws is evaluated, presenting the simulation results obtained when the different controllers are implemented.MICINN-FEDER DPI2009-0966

Optimized active disturbance rejection control for DC-DC buck converters with uncertainties using a reduced-order GPI observer

The output voltage regulation problem of a PWM- based DC-DC buck converter under various sources of uncertainties and disturbances is investigated in this paper via an optimized active disturbance rejection control (ADRC) approach. Aiming to practical implementation, a new reduced-order generalized proportional integral (GPI) observer is first designed to estimate the lumped (possibly time-varying) disturbances within the DC- DC circuit. By integrating the disturbance estimation information raised by the reduced-order GPI observer (GPIO) into the output prediction, an optimized ADRC method is developed to achieve optimized tracking performance even in the presence of distur- bances and uncertainties. It is shown that the proposed controller will guarantee the rigorous stability of closed-loop system, for any bounded uncertainties of the circuit, by appropriately choosing the observer gains and the bandwidthfactor. Experimental results illustrate that the proposed control solution is characterised by improved robustness performance against various disturbances and uncertainties compared to traditional ADRC and integral MPC approaches

A High-Gain Observer-Based Adaptive Super-Twisting Algorithm for DC-Link Voltage Control of NPC Converters

Acting as an interface between the grid and many energy systems, the active front-end (AFE) has been widely used in a large variety of industrial applications. In this paper, in order to ensure the fast dynamic performance and good disturbance rejection ability of the AFE, a high-gain observer (HGO) plus adaptive super-twisting algorithm (STA) for the three-level neutral-point-clamped (NPC) converter is proposed. Comparing with the conventional PI control strategy, the proposed controller implements the adaptive STA in the voltage regulator to provide a faster transient response. The gains of the adaptive STA keep varying according to the rules being reduced in steady state but increasing in transient conditions. Therefore, the chattering phenomenon is mitigated and the dynamic response is guaranteed. Additionally, to undermine the impact of external disturbances on the dc-link voltage, a high-efficiency HGO is designed in the voltage regulation loop to reject it. Experimental results based on a three-level NPC prototype are given and compared with the conventional PI method to validate the fast dynamic performance and high disturbance rejection ability of the proposed approach.National Key R&D Program of China SQ2019YFB130028National Natural Science Foundation of China 61525303National Natural Science Foundation of China 41772377National Natural Science Foundation of China 61673130Self-Planned Task of State Key Laboratory of Robotics and System (HIT) SKLRS201806BMinisterio de Economía y Competitividad TEC2016-78430-RJunta de Andalucía P18-RT-1340Fondo de Investigación Nacional de Qatar NPRP 9-310-2-13

Stabilization of DC–DC buck converter with unknown constant power load via passivity-based control plus proportion-integration

Abstract It is known that constant power load (CPL) may cause a negative impedance, which seriously affects the stability of power system. In this paper, a new control algorithm for DC–DC buck converter feeding unknown CPL is proposed. First, under the assumption of known extracted power load, the standard passivity–based control (PBC) is presented to reshape the system energy and compensate for the negative impedance and a proportion‐integration (PI) action around passive output is added to improve disturbance rejection performance, which forms the PBC plus PI (PBC+PI). Then, a parameter estimation algorithm is developed, based on immersion and invariance (I&I) technique, in order to online estimate the extracted power load. In the next step, the online estimation scheme is adopted to construct an adaptive strategy. Finally, the stability analysis of the cascaded system containing a closed‐loop control system and observer error dynamics is conducted. Simulation and experimental results are demonstrated to validate the performance of the proposed controller

Robust converter-fed motor control based on active rejection of multiple disturbances

In this work, an advanced motion controller is proposed for buck converter-fed DC motor systems. The design is based on an idea of active disturbance rejection control (ADRC) with its key component being a custom observer capable of reconstructing various types of disturbances (including complex, harmonic signals). A special formulation of the proposed design allows the control action to be expressed in a concise and practically appealing form reducing its implementation requirements. The obtained experimental results show increased performance of the introduced approach over conventionally used methods in tracking precision and disturbance rejection, while keeping similar level of energy consumption. A stability analysis using theory of singular perturbation further supports the validity of proposed control approach.Comment: 30 pages, 7 figures, 1 tabl