Information standards to support application and enterprise interoperability for the smart grid

Copyright @ 2012 IEEE.Current changes in the European electricity industry are driven by regulatory directives to reduce greenhouse gas emissions, at the same time as replacing aged infrastructure and maintaining energy security. There is a wide acceptance of the requirement for smarter grids to support such changes and accommodate variable injections from renewable energy sources. However the design templates are still emerging to manage the level of information required to meet challenges such as balancing, planning and market dynamics under this new paradigm. While secure and scalable cloud computing architectures may contribute to supporting the informatics challenges of the smart grid, this paper focuses on the essential need for business alignment with standardised information models such as the IEC Common Information Model (CIM), to leverage data value and control system interoperability. In this paper we present details of use cases being considered by National Grid, the GB transmission system operator for information interoperability in pan-network system management and planning.This study is financially supported by the National Grid, UK

Meeting the design challenges of nano-CMOS electronics: an introduction to an upcoming EPSRC pilot project

The years of ‘happy scaling’ are over and the fundamental challenges that the semiconductor industry faces, at both technology and device level, will impinge deeply upon the design of future integrated circuits and systems. This paper provides an introduction to these challenges and gives an overview of the Grid infrastructure that will be developed as part of a recently funded EPSRC pilot project to address them, and we hope, which will revolutionise the electronics design industry

Dynamic Model-based Management of Service-Oriented Infrastructure.

Models are an effective tool for systems and software design. They allow software architects to abstract from the non-relevant details. Those qualities are also useful for the technical management of networks, systems and software, such as those that compose service oriented architectures. Models can provide a set of well-defined abstractions over the distributed heterogeneous service infrastructure that enable its automated management. We propose to use the managed system as a source of dynamically generated runtime models, and decompose management processes into a composition of model transformations. We have created an autonomic service deployment and configuration architecture that obtains, analyzes, and transforms system models to apply the required actions, while being oblivious to the low-level details. An instrumentation layer automatically builds these models and interprets the planned management actions to the system. We illustrate these concepts with a distributed service update operation

Inter-organizational fault management: Functional and organizational core aspects of management architectures

Outsourcing -- successful, and sometimes painful -- has become one of the hottest topics in IT service management discussions over the past decade. IT services are outsourced to external service provider in order to reduce the effort required for and overhead of delivering these services within the own organization. More recently also IT services providers themselves started to either outsource service parts or to deliver those services in a non-hierarchical cooperation with other providers. Splitting a service into several service parts is a non-trivial task as they have to be implemented, operated, and maintained by different providers. One key aspect of such inter-organizational cooperation is fault management, because it is crucial to locate and solve problems, which reduce the quality of service, quickly and reliably. In this article we present the results of a thorough use case based requirements analysis for an architecture for inter-organizational fault management (ioFMA). Furthermore, a concept of the organizational respective functional model of the ioFMA is given.Comment: International Journal of Computer Networks & Communications (IJCNC

Integration of Cost andWork Breakdown Structures in the Management of Construction Projects

Scope management allows project managers to react when a project underperforms regarding schedule, budget, and/or quality at the execution stage. Scope management can also minimize project changes and budget omissions, as well as improve the accuracy of project cost estimates and risk responses. For scope management to be effective, though, it needs to rely on a robust work breakdown structure (WBS). A robust WBS hierarchically and faithfully reflects all project tasks and work packages so that projects are easier to manage. If done properly, the WBS also allows meeting the project objectives while delivering the project on time, on budget, and with the required quality. This paper analyzes whether the integration of a cost breakdown structure (CBS) can lead to the generation of more robust WBSs in construction projects. Over the last years, some international organizations have standardized and harmonized different cost classification systems (e.g., ISO 12006-2, ISO 81346-12, OmniClass, CoClass, UniClass). These cost databases have also been introduced into building information modeling (BIM) frameworks. We hypothesize that in BIM environments, if these CBSs are used to generate the project WBS, several advantages are gained such as sharper project definition. This enhanced project definition reduces project contradictions at both planning and execution stages, anticipates potential schedule and budget deviations, improves resource allocation, and overall it allows a better response to potential project risks. The hypothesis that the use of CBSs can generate more robust WBSs is tested by the response analysis of a questionnaire survey distributed among construction practitioners and project managers. By means of structural equation modeling (SEM), the correlation (agreement) and perception differences between two 250-respondent subsamples (technical project staff vs. project management staff) are also discussed. Results of this research support the use of CBSs by construction professionals as a basis to generate WBSs for enhanced project management (PM)

myTrustedCloud: Trusted cloud infrastructure for security-critical computation and data managment

Copyright @ 2012 IEEECloud Computing provides an optimal infrastructure to utilise and share both computational and data resources whilst allowing a pay-per-use model, useful to cost-effectively manage hardware investment or to maximise its utilisation. Cloud Computing also offers transitory access to scalable amounts of computational resources, something that is particularly important due to the time and financial constraints of many user communities. The growing number of communities that are adopting large public cloud resources such as Amazon Web Services [1] or Microsoft Azure [2] proves the success and hence usefulness of the Cloud Computing paradigm. Nonetheless, the typical use cases for public clouds involve non-business critical applications, particularly where issues around security of utilization of applications or deposited data within shared public services are binding requisites. In this paper, a use case is presented illustrating how the integration of Trusted Computing technologies into an available cloud infrastructure - Eucalyptus - allows the security-critical energy industry to exploit the flexibility and potential economical benefits of the Cloud Computing paradigm for their business-critical applications

A critical comparison of approaches to resource name management within the IEC common information model

Copyright @ 2012 IEEEElectricity network resources are frequently identified within different power systems by inhomogeneous names and identities due to the legacy of their administration by different utility business domains. The IEC 61970 Common Information Model (CIM) enables network modeling to reflect the reality of multiple names for unique network resources. However this issue presents a serious challenge to the integrity of a shared CIM repository that has the task of maintaining a resource manifest, linking network resources to master identities, when unique network resources may have multiple names and identities derived from different power system models and other power system applications. The current approach, using CIM 15, is to manage multiple resource names within a singular CIM namespace utilizing the CIM “IdentifiedObject” and “Name” classes. We compare this approach to one using additional namespaces relating to different power systems, similar to the practice used in CIM extensions, in order to more clearly identify the genealogy of a network resource, provide faster model import times and a simpler means of supporting the relationship between multiple resource names and identities and a master resource identity.This study is supported by the UK National Grid and Brunel University

An intersection in population control: Welfare reform and indigenous people with a partial capacity to work in the Australian Northern Territory

In Australia, in the last decade, there have been significant policy changes to income support payments for people with a disability and Indigenous people. These policy reforms intersect in the experience of Indigenous people with a partial capacity to work in the Northern Territory who are subject to compulsory income management if classified as long-term welfare payment recipients. This intersection is overlooked in existing research and government policy. In this article, we apply intersectionality and Southern disability theory as frameworks to analyse how Indigenous people with a partial capacity to work (PCW) in the Northern Territory are governed under compulsory income management. Whilst the program is theoretically race and ability neutral, in practice it targets specific categories of people because it fails to address the structural and cultural barriers experienced by Indigenous people with a disability and reinscribes disabling and colonising technologies of population control