UA2TPG: An untestability analyzer and test pattern generator for SEUs in the configuration memory of SRAM-based FPGAs

This paper presents UA2TPG, a static analysis tool for the untestability proof and automatic test pattern generation for SEUs in the configuration memory of SRAM-based FPGA systems. The tool is based on the model-checking verification technique. An accurate fault model for both logic components and routing structures is adopted. Experimental results show that many circuits have a significant number of untestable faults, and their detection enables more efficient test pattern generation and on-line testing. The tool is mainly intended to support on-line testing of critical components in FPGA fault-tolerant systems

Programmable logic devices: a test approach for the Input / Output blocks and Pad-to-Pin interconnections

Dynamically reconfigurable systems based on partial and dynamically reconfigurable FPGAs may have their functionality partially modified at run-time without stopping the operation of the whole system. The efficient management of the logic space available is one of the biggest problems faced by these systems. When the sequence of reconfigurations to be performed is not predictable, resource allocation decisions have to be made on-line. A rearrangement may be necessary to get enough contiguous space to implement incoming functions, avoiding the spreading of their components and the resulting degradation of system performance.A new software tool that helps to handle the problems posed by the consecutive reconfiguration of the same logic space is presented in this paper. This tool uses a novel on-line rearrangement procedure to solve fragmentation problems and to rearrange the logic space in a way completely transparent to the applications currently running

LOT: Logic Optimization with Testability - new transformations for logic synthesis

A new approach to optimize multilevel logic circuits is introduced. Given a multilevel circuit, the synthesis method optimizes its area while simultaneously enhancing its random pattern testability. The method is based on structural transformations at the gate level. New transformations involving EX-OR gates as well as Reed–Muller expansions have been introduced in the synthesis of multilevel circuits. This method is augmented with transformations that specifically enhance random-pattern testability while reducing the area. Testability enhancement is an integral part of our synthesis methodology. Experimental results show that the proposed methodology not only can achieve lower area than other similar tools, but that it achieves better testability compared to available testability enhancement tools such as tstfx. Specifically for ISCAS-85 benchmark circuits, it was observed that EX-OR gate-based transformations successfully contributed toward generating smaller circuits compared to other state-of-the-art logic optimization tools

A procedural method for the efficient implementation of full-custom VLSI designs

An imbedded language system for the layout of very large scale integration (VLSI) circuits is examined. It is shown that through the judicious use of this system, a large variety of circuits can be designed with circuit density and performance comparable to traditional full-custom design methods, but with design costs more comparable to semi-custom design methods. The high performance of this methodology is attributable to the flexibility of procedural descriptions of VLSI layouts and to a number of automatic and semi-automatic tools within the system

An Equivalence Checking Framework for Agile Hardware Design

Agile hardware design enables designers to produce new design iterations efficiently. Equivalence checking is critical in ensuring that a new design iteration conforms to its specification. In this paper, we introduce an equivalence checking framework for hardware designs represented in HalideIR. HalideIR is a popular intermediate representation in software domains such as deep learning and image processing, and it is increasingly utilized in agile hardware design.We have developed a fully automatic equivalence checking workflow seamlessly integrated with HalideIR and several optimizations that leverage the incremental nature of agile hardware design to scale equivalence checking. Evaluations of two deep learning accelerator designs show our automatic equivalence checking framework scales to hardware designs of practical sizes and detects inconsistencies that manually crafted tests have missed

High integrity hardware-software codesign

Programmable logic devices (PLDs) are increasing in complexity and speed, and are being used as important components in safety-critical systems. Methods for developing high-integrity software for these systems are well-known, but this is not true for programmable logic. We propose a process for developing a system incorporating software and PLDs, suitable for safety critical systems of the highest levels of integrity. This process incorporates the use of Synchronous Receptive Process Theory as a semantic basis for specifying and proving properties of programs executing on PLDs, and extends the use of SPARK Ada from a programming language for safety-critical systems software to cover the interface between software and programmable logic. We have validated this approach through the specification and development of a substantial safety-critical system incorporating both software and programmable logic components, and the development of tools to support this work. This enables us to claim that the methods demonstrated are not only feasible but also scale up to realistic system sizes, allowing development of such safety-critical software-hardware systems to the levels required by current system safety standards

Introduction to Logic Circuits & Logic Design with Verilog

The overall goal of this book is to fill a void that has appeared in the instruction of digital circuits over the past decade due to the rapid abstraction of system design. Up until the mid-1980s, digital circuits were designed using classical techniques. Classical techniques relied heavily on manual design practices for the synthesis, minimization, and interfacing of digital systems. Corresponding to this design style, academic textbooks were developed that taught classical digital design techniques. Around 1990, large-scale digital systems began being designed using hardware description languages (HDL) and automated synthesis tools. Broad-scale adoption of this modern design approach spread through the industry during this decade. Around 2000, hardware description languages and the modern digital design approach began to be taught in universities, mainly at the senior and graduate level. There were a variety of reasons that the modern digital design approach did not penetrate the lower levels of academia during this time. First, the design and simulation tools were difficult to use and overwhelmed freshman and sophomore students. Second, the ability to implement the designs in a laboratory setting was infeasible. The modern design tools at the time were targeted at custom integrated circuits, which are cost- and time-prohibitive to implement in a university setting. Between 2000 and 2005, rapid advances in programmable logic and design tools allowed the modern digital design approach to be implemented in a university setting, even in lower-level courses. This allowed students to learn the modern design approach based on HDLs and prototype their designs in real hardware, mainly fieldprogrammable gate arrays (FPGAs). This spurred an abundance of textbooks to be authored, teaching hardware description languages and higher levels of design abstraction. This trend has continued until today. While abstraction is a critical tool for engineering design, the rapid movement toward teaching only the modern digital design techniques has left a void for freshman- and sophomore-level courses in digital circuitry. Legacy textbooks that teach the classical design approach are outdated and do not contain sufficient coverage of HDLs to prepare the students for follow-on classes. Newer textbooks that teach the modern digital design approach move immediately into high-level behavioral modeling with minimal or no coverage of the underlying hardware used to implement the systems. As a result, students are not being provided the resources to understand the fundamental hardware theory that lies beneath the modern abstraction such as interfacing, gate-level implementation, and technology optimization. Students moving too rapidly into high levels of abstraction have little understanding of what is going on when they click the “compile and synthesize” button of their design tool. This leads to graduates who can model a breadth of different systems in an HDL but have no depth into how the system is implemented in hardware. This becomes problematic when an issue arises in a real design and there is no foundational knowledge for the students to fall back on in order to debug the problem

Transformations of High-Level Synthesis Codes for High-Performance Computing

Specialized hardware architectures promise a major step in performance and energy efficiency over the traditional load/store devices currently employed in large scale computing systems. The adoption of high-level synthesis (HLS) from languages such as C/C++ and OpenCL has greatly increased programmer productivity when designing for such platforms. While this has enabled a wider audience to target specialized hardware, the optimization principles known from traditional software design are no longer sufficient to implement high-performance codes. Fast and efficient codes for reconfigurable platforms are thus still challenging to design. To alleviate this, we present a set of optimizing transformations for HLS, targeting scalable and efficient architectures for high-performance computing (HPC) applications. Our work provides a toolbox for developers, where we systematically identify classes of transformations, the characteristics of their effect on the HLS code and the resulting hardware (e.g., increases data reuse or resource consumption), and the objectives that each transformation can target (e.g., resolve interface contention, or increase parallelism). We show how these can be used to efficiently exploit pipelining, on-chip distributed fast memory, and on-chip streaming dataflow, allowing for massively parallel architectures. To quantify the effect of our transformations, we use them to optimize a set of throughput-oriented FPGA kernels, demonstrating that our enhancements are sufficient to scale up parallelism within the hardware constraints. With the transformations covered, we hope to establish a common framework for performance engineers, compiler developers, and hardware developers, to tap into the performance potential offered by specialized hardware architectures using HLS