The low area probing detector as a countermeasure against invasive attacks

© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksMicroprobing allows intercepting data from on-chip wires as well as injecting faults into data or control lines. This makes it a commonly used attack technique against security-related semiconductors, such as smart card controllers. We present the low area probing detector (LAPD) as an efficient approach to detect microprobing. It compares delay differences between symmetric lines such as bus lines to detect timing asymmetries introduced by the capacitive load of a probe. Compared with state-of-the-art microprobing countermeasures from industry, such as shields or bus encryption, the area overhead is minimal and no delays are introduced; in contrast to probing detection schemes from academia, such as the probe attempt detector, no analog circuitry is needed. We show the Monte Carlo simulation results of mismatch variations as well as process, voltage, and temperature corners on a 65-nm technology and present a simple reliability optimization. Eventually, we show that the detection of state-of-the-art commercial microprobes is possible even under extreme conditions and the margin with respect to false positives is sufficient.Peer ReviewedPostprint (author's final draft

Dynamic Laser Fault Injection Aided by Quiescent Photon Emissions in Embedded Microcontrollers: Apparatus, Methodology and Attacks

Internet of Things (IoT) is becoming more integrated in our daily life with the increasing number of embedded electronic devices interacting together. These electronic devices are often controlled by a Micro-Controller Unit (MCU). As an example, it is estimated that today’s well-equipped automobile uses more than 50 MCUs. Some MCUs contain cryptographic co-processors to enhance the security of the exchanged and stored data with a common belief that the data is secured and safe. However many MCUs have been shown to be vulnerable to Fault Injection (FI) attacks. These attacks can reveal shared secrets, firmware, and other confidential information. In addition, this extracted information obtained by attacks can lead to identification of new vulnerabilities which may scale to attacks on many devices. In general, FI on MCUs corrupt data or corrupt instructions. Although it is assumed that only authorized personnel with access to cryptographic secrets will gain access to confidential information in MCUs, attackers in specialized labs nowadays may have access to high-tech equipment which could be used to attack these MCUs. Laser Fault Injection (LFI) is gaining more of a reputation for its ability to inject local faults rather than global ones due to its precision, thus providing a greater risk of breaking security in many devices. Although publications have generally discussed the topic of security of MCUs, attack techniques are diverse and published LFI provides few and superficial details about the used experimental setup and methodology. Furthermore, limited research has examined the combination of both LFI and Photo-Emission Microscopy (PEM), direct modification of instructions using the LFI, control of embedded processor resets using LFI, and countermeasures which simultaneously thwart other aspects including decapsulation and reverse engineering (RE). This thesis contributes to the study of the MCUs’ security by analyzing their susceptibility to LFI attacks and PEM. The proposed research aims to build a LFI bench from scratch allowing maximum control of laser parameters. In addition, a methodology for analysis of the Device Under Attack (DUA) in preparation for LFI is proposed, including frontside/backside decapsulation methods, and visualization of the structure of the DUA. Analysis of attack viability of different targets on the DUA, including One-Time Programmable (OTP) memory, Flash memory and Static Random Access Memory (SRAM) was performed. A realistic attack of a cryptographic algorithm, such as Advanced Encryption Standard (AES) using LFI was conducted. On the other hand, countermeasures to the proposed attack techniques, including decapsulation/RE, LFI and PEM, were discussed. This dissertation provides a summary for the necessary background and experimental setup to study the possibility of LFI and PEM in different DUAs of two different technologies, specifically PIC16F687 and ARM Cortex-M0 LPC1114FN28102. Attacks performed on on-chip peripherals such as Universal Asynchronous Receiver/Transmitter (UART) and debug circuity reveal new vulnerabilities. This research is important for understanding attacks in order to design countermeasures for securing future hardware

No Place to Hide: Contactless Probing of Secret Data on FPGAs

Field Programmable Gate Arrays (FPGAs) have been the target of different physical attacks in recent years. Many different countermeasures have already been integrated into these devices to mitigate the existing vulnerabilities. However, there has not been enough attention paid to semi-invasive attacks from the IC backside due to the following reasons. First, the conventional semi-invasive attacks from the IC backside --- such as laser fault injection and photonic emission analysis --- cannot be scaled down without further effort to the very latest nanoscale technologies of modern FPGAs and programmable SoCs. Second, the more advanced solutions for secure storage, such as controlled Physically Unclonable Functions (PUFs), make the conventional memory-readout techniques almost impossible. In this paper, however, novel approaches have been explored: Attacks based on Laser Voltage Probing (LVP) and its derivatives, as commonly used in Integrated Circuit (IC) debug for nanoscale low voltage technologies, are successfully launched against a $60$ nanometer technology FPGA. We discuss how these attacks can be used to break modern bitstream encryption implementations. Our attacks were carried out on a Proof-of-Concept PUF-based key generation implementation. To the best of our knowledge this is the first time that LVP is used to perform an attack on secure ICs

3D Integration: Another Dimension Toward Hardware Security

We review threats and selected schemes concerning hardware security at design and manufacturing time as well as at runtime. We find that 3D integration can serve well to enhance the resilience of different hardware security schemes, but it also requires thoughtful use of the options provided by the umbrella term of 3D integration. Toward enforcing security at runtime, we envision secure 2.5D system-level integration of untrusted chips and "all around" shielding for 3D ICs.Comment: IEEE IOLTS 201

Sequential Circuit Design for Embedded Cryptographic Applications Resilient to Adversarial Faults

In the relatively young field of fault-tolerant cryptography, the main research effort has focused exclusively on the protection of the data path of cryptographic circuits. To date, however, we have not found any work that aims at protecting the control logic of these circuits against fault attacks, which thus remains the proverbial Achilles’ heel. Motivated by a hypothetical yet realistic fault analysis attack that, in principle, could be mounted against any modular exponentiation engine, even one with appropriate data path protection, we set out to close this remaining gap. In this paper, we present guidelines for the design of multifault-resilient sequential control logic based on standard Error-Detecting Codes (EDCs) with large minimum distance. We introduce a metric that measures the effectiveness of the error detection technique in terms of the effort the attacker has to make in relation to the area overhead spent in implementing the EDC. Our comparison shows that the proposed EDC-based technique provides superior performance when compared against regular N-modular redundancy techniques. Furthermore, our technique scales well and does not affect the critical path delay

Advances in Logic Locking: Past, Present, and Prospects

Logic locking is a design concealment mechanism for protecting the IPs integrated into modern System-on-Chip (SoC) architectures from a wide range of hardware security threats at the IC manufacturing supply chain. Logic locking primarily helps the designer to protect the IPs against reverse engineering, IP piracy, overproduction, and unauthorized activation. For more than a decade, the research studies that carried out on this paradigm has been immense, in which the applicability, feasibility, and efficacy of the logic locking have been investigated, including metrics to assess the efficacy, impact of locking in different levels of abstraction, threat model definition, resiliency against physical attacks, tampering, and the application of machine learning. However, the security and strength of existing logic locking techniques have been constantly questioned by sophisticated logical and physical attacks that evolve in sophistication at the same rate as logic locking countermeasure approaches. By providing a comprehensive definition regarding the metrics, assumptions, and principles of logic locking, in this survey paper, we categorize the existing defenses and attacks to capture the most benefit from the logic locking techniques for IP protection, and illuminating the need for and giving direction to future research studies in this topic. This survey paper serves as a guide to quickly navigate and identify the state-of-the-art that should be considered and investigated for further studies on logic locking techniques, helping IP vendors, SoC designers, and researchers to be informed of the principles, fundamentals, and properties of logic locking