IN-SITU APPROACH FOR CHARACTERIZATION AND MODELING OF TRANSPONDER PACKAGING TECHNIQUES IN RADIO FREQUENCY INDENTIFICATION SYSTEMS

In a typical Radio Frequency Identification system, the tag-reader communication is the most important characteristic of success or failure. In this system, the tag represents the weakest link in the equation and must be selected with great care. It is also important to recognize that a passive RFID tag derives its power from the RF energy generated by the reader. In turn, it communicates to the reader by modulation of the incident RF energy to create a backscatter signal, where any power loss between the antenna and the integrated circuit chip limits the maximum distance from which the tag can be read. Because the typical assembly flow of the RFID labels requires multiple steps, different assembly methodologies are being used to lower the final cost of the RFID label. Packaged parasitic components can significantly degrade the performance of the RFID tags. Today, the most insidious problem is the loss of energy due to the mismatch between the antenna and the IC chip. The final cost and fabrication requirements for the RFID tag impose a set of criteria on the assembly of the tag, where the typical methods for extracting and characterizing parasitic components of the packaging are not feasible. This research develops the theoretical mechanism for measuring and modeling the packaging parasitic components of the passive Ultra High Frequency RFID tags. The research is based on proven antenna theory and antenna measurement methods, which in turn will provide a benchmark for the current and future assembly methods for manufacturing of the RFID labels

Tin dioxide nanoparticle based sensor integrated with microstrip antenna for passive wireless ethylene sensing

In this dissertation, we present the development and integration of a passive ethylene gas sensor with triangular microstrip patch antenna for wireless monitoring of climacteric fruit freshness. The existing ethylene sensors are mostly SnO2 resistor based active sensors, fabricated on rigid substrates requiring high fabrication temperatures and cannot be used for wireless applications. The proposed passive ethylene gas sensor is a novel nanoparticle based SnO2 capacitive sensor which, unlike the other existing SnO2resistor based active thick film and thin film sensors, consists of 10 nm to 15 nm SnO2 nanoparticles coated as a thin dielectric film of 1300 nm thickness. The nanoscale particle size and film thickness of the sensing dielectric layer in the capacitor model aids in sensing ethylene at room temperature and eliminates the need for micro hotplates used in existing SnO2 based resistive sensors. In comparison to the high sintering deposition temperatures used for many currently available ethylene sensors fabricated on rigid substrates, the SnO2 sensing layer is deposited using a room temperature dip coating process on flexible polyimide substrates. The capacitive sensor fabricated with pure SnO2 nanoparticles as the dielectric showed a 5 pF change in capacitance when ethylene gas concentration was increased from 0 to 100 ppm. The change in capacitance was increased to 7 pF by introducing a 10 nm layer of platinum (Pt) and palladium (Pd) alloy deposited by sputter deposition. This also improved the selectivity of the sensor to ethylene mixed in a CO2 gas environment. The response time was decreased to 3 min for SnO2 samples with Pt/Pd layer (5 min for pure SnO2samples) and its recovery time was decreased to 5 min compared to 7 min for pure SnO2 samples. The passive SnO2 capacitive ethylene sensor is integrated with a triangular microstrip patch antenna using capacitively loaded integration methodology which represents a one of a kind passive wireless sensor tag used for detecting freshness of climacteric fruit. The integration methodology adapted also reduced the size of the triangular patch antenna by 63 percent. The decrease in sensor capacitance due to the presence of ethylene (0 to 100 ppm) changes the antenna resonant frequency by 7 MHz and return loss by 9.5 dB, which makes the system reliable for far field wireless ethylene monitoring applications. The sensor tag output was also detected using an RFID reader showing a change in demodulated signal amplitude of 3 mV. Experimental result is presented for detecting multiple sensor tags at varying distances based on the wireless measurement of return loss which eliminates the common distance problem existing in backscatter signal based tags

Development of sensors and non-destructive techniques to determine the performance of coatings in construction

The primary objective of this work was to examine and develop techniques for monitoring the degradation of Organically Coated Steel (OCS) in-situ. This included the detection of changes associated with the weathering to both the organic coating and metallic substrate. Initially, a review of current promising techniques was carried out however many were found to be unsuitable for this application and the adaptation of current techniques and the development of new techniques was considered. A brief concept investigation, based on initial testing and considerations, was used to determine a number of sensing techniques to examine. These included embedded, Resonant Frequency Identification (RFID), Magnetic Flux Leakage (MFL) and dielectric sensing. Each of these techniques were assessed for the application, prototyped, and tested against a range of samples to determine the accuracy and sensitivity of degradation detection provided. A range of poorly and highly durable coated samples were used in conjunction with accelerated weathering testing for this aim. Track based electronic printed sensors were presented as both a cut edge corrosion tracking and coating capacitance measurement method. While suffering somewhat from electrical paint compatibility issues both concepts showed merit in initial trials however the capacitive sensor ultimately proved insufficiently responsive to coating changes. The embedded, progressive failure-based, cut edge corrosion sensor was produced and tested in modern coating systems with moderate success. Novel applications of RFID and MLF techniques were considered and proved capable of detecting large changes in substrate condition due to significant corrosion. However, there was a lack of sufficient sensitivity when considering early-stage corrosion of durable modern OCS products. Finally, it was shown that a chipless antenna could be designed and optimised for novelly monitoring the changes to the dielectric properties of a paint layer due to degradation. However, ultimately this test, due to equipment requirements, lent itself more to lab testing than in-situ. Due to some of these limitations a different approach was considered in which the environmental factors influencing degradation were examined with the aim of relating these to performance across a building. It was observed that a combination of high humidity and the build-up of aggressive natural deposits contributed to high degradation rates in sheltered regions, such as building eaves, where microclimates were created. The build-up of deposits and their effect was presented as a key degradation accelerant during in-use service. A unique numerical simulation approach was developed to predict the natural washing, via rain impact and characteristics of the building analysed. This approach showed promise for determining areas unlikely to be naturally washed, and therefore subjected to a degradation accelerating, build-up of deposits. Given these understandings coated wetness sensors were considered as a realistic live-monitoring device capable of determining deposit build up and ultimately OCS lifetime

Techniques for In Situ Monitoring the Performance of Organic Coatings and Their Applicability to the Pre-Finished Steel Industry: A Review

A review is carried out in this paper into techniques that currently exist for, of have the potential to be used for, monitoring the performance of organic coating. Specific attention is paid to the applicability of each method to pre-finished steel used in the construction industry as these are rarely monitored in situ and their expected performance is often only estimated from lab-based accelerated corrosion testing. Monitoring could allow more accurate estimates of building cladding lifespan and required maintenance schedules; provide customers with active performance data; additionally, with a better understanding of performance, more appropriate coatings or coating weights could be selected for a construction project, offering economic benefits as part of smart building developments. An introduction to coatings, their use for corrosion protection, failure mechanisms, and relevant monitoring techniques is given before current assessment techniques are described in terms of their working principles. Examples of recent work are presented for the techniques that have been investigated for monitoring or directly relatable purposes. The review concludes that there are several good reasons why an optimum corrosion monitoring technology does not currently exist, however, promising research is emerging in the field of wireless and embedded sensor design which is providing optimistic results

RFID Antennas – Possibilities and Limitations

Non

Generic wireless sensor network for dynamic monitoring of a new generation of building material

Existing testing methods for building materials before deployment include a series of procedures as stipulated in British Standards, and most tests are performed in a controlled laboratory environment. Types of equipment used for measurements, data logging, and visualisation are commonly bulky, hard-wired, and consume a significant amount of power. Most of the off-the-shelf sensing nodes have been designed for a few specific applications and cannot be used for general purpose applications. This makes it difficult to modify or extend the sensing features when needed. This thesis takes the initiative of designing and implementing a low-powered, open-source, flexible, and small-sized Generic wireless sensor network (GWSN) that can continuously monitor the building materials and building environment, to address the limitations of the conventional measurement methods and the technological gap. The designed system is comprised of two custom-made sensor nodes and a gateway, as well as purpose designed firmware for data collection and processing. For the proof of concept and experimental studies, several measurement strategies were designed, to demonstrate, evaluate, and validate the effectiveness of the system. The data was collected from selected case study areas in the School of Energy, Geoscience, Infrastructure and Society (EGIS) laboratories by measuring and monitoring building structures and indoor environment quality parameters using the designed GWSN. The measured data includes heat flux through the material, surface and air temperatures on both sides of the material/structure, moisture variation, ambient temperature, relative humidity, carbon dioxide, volatile organic compounds, particulate matter, and sound/acoustic levels. The initial results show the potential of the designed system to become the new benchmark for tracking the variation of building materials with the environment and investigating the impact of variation of building materials on indoor environment quality. Based on the estimates of the thermal performance data, the sample used in the experiment had a typical U-value between 4.8 and 5.8 W/m2K and a thermal resistance value of 0.025m2 ·K/W[1][2]. Thermal resistance values from the GWSN real-time measurement were between 0.025 and 0.03 m2K/W, with an average of 0.025 m2K/W, and thermal transmission values varied between 4.55 and 5.11 W/m2K. Based on the data obtained, the results are within the range of typical values[3]. For thermal comfort measurements, the results of humidity and temperature from GWSN were compared to values in the Kambic climatic chamber in the EGIS laboratory, and the accuracies were 99 % and 98 % respectively. For the IAQ measurements, the values of CO2 and TVOCs were compared to the commercial off-the-shelf measuring system, and the accuracies were 98 %, and 97 %. Finally, the GWSN was tested for acoustic measurements in the range of 55 dB to 106 dB. The results were compared to class one Bruel & Kjaer SLM. The accuracy of GWSN was 97 %. The GWSN can be used for in lab and in-situ applications, to measure and analyse the thermal physical properties of building materials/building structures (thermal transmittance, thermal conductivity, and thermal resistance). The system can also measure indoor air quality, thermal comfort, and airborne sound insulation of the building envelope. The key point here is to establish a direct link between how building materials vary with the environment and how this impacts indoor environment quality. Such a link is essential for long-term analysis of building materials, which cannot be achieved using current methods. Regarding increasing the power efficient of the implemented GWSN as well as its performance and functionality, a new sensing platforms using backscatter technology have been introduced. The theory of modulation and spread spectrum technique used in backscattering has been explored. The trade-off between hardware complexity/power consumption and link performance has been investigated. Theoretical analysis and simulation validation of the new sensing technique, using backscatter communication, has been performed. A novel multicarrier backscatter tag compatible with Wireless Fidelity has been implemented and an IEEE 802.11g OFDM preamble was synthesized by simulation. The tag consists of only two transistors with current consumption no larger than 0.2 μA at voltage of less than 0.6 V. Novel harmonic suppression approaches for frequency-shifted backscatter communication has been proposed and demonstrated. The proposed approaches independently manipulate mirror harmonics and higher order harmonics whereby; specified higher order harmonics can be removed by carefully designing the real-valued (continuous and discrete) reflection coefficients-based backscatter tags. When successfully implemented, the backscatter system will reduce sensor node power consumption by shifting the power-consuming radio frequency carrier synthesis functions to carrier emitters.Engineering and Physical Sciences Research Council (EPSRC) Funding EP/H009612/

Wireless Sensors and Actuators for Structural Health Monitoring of Fiber Composite Materials

This work evaluates and investigates the wireless generation and detection of Lamb-waves on fiber-reinforced materials using surface applied or embedded piezo elements. The general target is to achieve wireless systems or sensor networks for Structural Health Monitoring (SHM), a type of Non-Destructive-Evaluation (NDE). In this sense, a fully wireless measurement system that achieves power transmission implementing inductive coils is reported. This system allows a reduction of total system weight as well as better integration in the structure. A great concern is the characteristics of the material, in which the system is integrated, because the properties can have a direct impact on the strength of the magnetic field. Carbon-Fiber-Reinforced-Polymer (CFRP) is known to behave as an electrical conductor, shielding radio waves with increasing worse effects at higher frequencies. Due to the need of high power and voltage, interest is raised to evaluate the operation of piezo as actuators at the lower frequency ranges. To this end, actuating occurs at the International Scientific and Medical (ISM) band of 125 kHz or low-frequency (LF) range. The feasibility of such system is evaluated extensively in this work. Direct excitation, is done by combining the actuator bonded to the surface or embedded in the material with an inductive LF coil and setting the circuit in resonance. A more controlled possibility, also explored, is the use of electronics to generate a Hanning-windowed-sine to excite the PWAS in a narrow spectrum. In this case, only wireless power is transmitted to the actuator node, and this lastly implements a Piezo-driver to independently excite Lamb-waves. Sensing and data transfer, on the other hand, is done using the high-frequency (HF) 13.56 MHz. The HF range covers the requirements of faster sampling rate and lower energy content. A re-tuning of the antenna coils is performed to obtain better transmission qualities when the system is implemented in CFRP. Several quasi-isotropic (QI) CFRP plates with sensor and actuator nodes were made to measure the quality of transmission and the necessary energy to stimulate the actuator-sensor system. In order to produce baselines, measurements are prepared from a healthy plate under specific temperature and humidity conditions. The signals are evaluated to verify the functionality in the presence of defects. The measurements demonstrate that it is possible to wirelessly generate Lamb-waves while early results show the feasibility to determine the presence of structural failure. For instance, progress has been achieved detecting the presence of a failure in the form of drilled holes introduced to the structure. This work shows a complete set of experimental results of different sensor/-actuator nodes

Battery-less near field communications (nfc) sensors for internet of things (iot) applications

L’ implementació de la tecnologia de comunicació de camp proper (NFC) en els telèfons intel·ligents no para de créixer degut a l’ús d’aquesta per fer pagaments, això, junt amb el fet de poder aprofitar l’energia generada pel mòbil no només per la comunicació, sinó també per transmetre energia, el baix cost dels xips NFC, i el fet de que els telèfons tinguin connectivitat amb internet, possibilita i fa molt interesant el disseny d’etiquetes sense bateria incorporant-hi sensors i poder enviar la informació al núvol, dins del creixent escenari de l’internet de les coses (IoT). La present Tesi estudia la viabilitat d’aquests sensors, analitzant la màxima distància entre lector i sensor per proveir la potència necessària, presenta tècniques per augmentar el rang d’operació, i analitza els efectes de certs materials quan aquests estan propers a les antenes. Diversos sensors han estat dissenyats i analitzats i son presentats en aquest treball. Aquests son: Una etiqueta que mesura la humitat de la terra, la temperatura i la humitat relativa de l’aire per controlar les condicions de plantes. Un sensor per detectar la humitat en bolquers, imprès en material flexible que s’adapta a la forma del bolquer. Dues aplicacions, una per estimació de pH i una altre per avaluar el grau de maduració de fruites, basats en un sensor de color. I, per últim, s’estudia la viabilitat de sensors en implants per aplicacions mèdiques, analitzant l’efecte del cos i proposant un sistema per augmentar la profunditat a la que aquests es poden llegir utilitzant un telèfon mòbil. Tots aquests sensors poden ser alimentats i llegits per qualsevol dispositiu que disposin de connexió NFC.La implementación de la tecnología de comunicaciones de campo cercano (NFC) en los teléfonos inteligentes no para de crecer debido al uso de esta para llevar a cabo pagos, esto, junto con el hecho de poder aprovechar la energía generada por el móvil no sólo para la comunicación, sino también para transmitir energía, el bajo coste de los chips NFC, i el hecho que los teléfonos tengan conectividad a internet, posibilita y hace muy interesante el diseño de etiquetas sin batería que incorporen sensores i poder enviar la información a la nube, enmarcado en el creciente escenario del internet de las cosas (IoT). La presente Tesis estudia la viabilidad de estos sensores, analizando la máxima distancia entre lector i sensor para proveer la potencia necesaria, presenta técnicas para aumentar el rango de operación, y analiza los efectos de ciertos materiales cuando estos están cerca de las antenas. Varios sensores han sido diseñados y analizados y son presentados en este trabajo. Estos son: Una etiqueta que mide la humedad de la tierra, la temperatura y la humedad relativa del aire para controlar las condiciones de plantas. Un sensor para detectar la humedad en pañales, impreso en material flexible que se adapta a la forma del pañal. Dos aplicaciones, una para estimación de pH y otra para evaluar el grado de maduración de frutas, basados en un sensor de color. Y, por último, se estudia la viabilidad de sensores en implantes para aplicaciones médicas, analizando el efecto del cuerpo y proponiendo un sistema para aumentar la profundidad a la que estos se pueden leer usando un teléfono móvil. Todos estos sensores pueden ser alimentados y leídos por cualquier dispositivo que disponga de conexión NFC.The implementation of near field communication (NFC) technology into smartphones grows rapidly due the use of this technology as a payment system. This, altogether with the fact that the energy generated by the phone can be used not only to communicate but for power transfer as well, the low-cost of the NFC chips, and the fact that the smartphones have connectivity to internet, makes possible and very interesting the design of battery-less sensing tags which information can be sent to the cloud, within the growing internet of things (IoT) scenario. This Thesis studies the feasibility of these sensors, analysing the maximum distance between reader and sensor to provide the necessary power, presents techniques to increase the range of operation, and analyses the effects of certain materials when they are near to the antennas. Several sensors have been designed and analysed and are presented in this work. These are: a tag that measures the soil moisture, the temperature and the relative humidity of the air to control the conditions of plants. A moisture sensor for diapers, printed on flexible material that adapts to the diaper shape. Two applications, one for pH estimation and another for assessing the degree of fruit ripening, based on a colour sensor. And finally, the feasibility of sensors in implants for medical applications is studied, analysing the effect of the body and proposing a system to increase the depth at which they can be read using a mobile phone. All of these sensors can be powered and read by any NFC enabled device