Robotic Cameraman for Augmented Reality based Broadcast and Demonstration

In recent years, a number of large enterprises have gradually begun to use vari-ous Augmented Reality technologies to prominently improve the audiences’ view oftheir products. Among them, the creation of an immersive virtual interactive scenethrough the projection has received extensive attention, and this technique refers toprojection SAR, which is short for projection spatial augmented reality. However,as the existing projection-SAR systems have immobility and limited working range,they have a huge difficulty to be accepted and used in human daily life. Therefore,this thesis research has proposed a technically feasible optimization scheme so thatit can be practically applied to AR broadcasting and demonstrations. Based on three main techniques required by state-of-art projection SAR applica-tions, this thesis has created a novel mobile projection SAR cameraman for ARbroadcasting and demonstration. Firstly, by combining the CNN scene parsingmodel and multiple contour extractors, the proposed contour extraction pipelinecan always detect the optimal contour information in non-HD or blurred images.This algorithm reduces the dependency on high quality visual sensors and solves theproblems of low contour extraction accuracy in motion blurred images. Secondly, aplane-based visual mapping algorithm is introduced to solve the difficulties of visualmapping in these low-texture scenarios. Finally, a complete process of designing theprojection SAR cameraman robot is introduced. This part has solved three mainproblems in mobile projection-SAR applications: (i) a new method for marking con-tour on projection model is proposed to replace the model rendering process. Bycombining contour features and geometric features, users can identify objects oncolourless model easily. (ii) a camera initial pose estimation method is developedbased on visual tracking algorithms, which can register the start pose of robot to thewhole scene in Unity3D. (iii) a novel data transmission approach is introduced to establishes a link between external robot and the robot in Unity3D simulation work-space. This makes the robotic cameraman can simulate its trajectory in Unity3D simulation work-space and project correct virtual content. Our proposed mobile projection SAR system has made outstanding contributionsto the academic value and practicality of the existing projection SAR technique. Itfirstly solves the problem of limited working range. When the system is running ina large indoor scene, it can follow the user and project dynamic interactive virtualcontent automatically instead of increasing the number of visual sensors. Then,it creates a more immersive experience for audience since it supports the user hasmore body gestures and richer virtual-real interactive plays. Lastly, a mobile systemdoes not require up-front frameworks and cheaper and has provided the public aninnovative choice for indoor broadcasting and exhibitions

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

Advances towards behaviour-based indoor robotic exploration

215 p.The main contributions of this research work remain in object recognition by computer vision, by one side, and in robot localisation and mapping by the other. The first contribution area of the research address object recognition in mobile robots. In this area, door handle recognition is of great importance, as it help the robot to identify doors in places where the camera is not able to view the whole door. In this research, a new two step algorithm is presented based on feature extraction that aimed at improving the extracted features to reduce the superfluous keypoints to be compared at the same time that it increased its efficiency by improving accuracy and reducing the computational time. Opposite to segmentation based paradigms, the feature extraction based two-step method can easily be generalized to other types of handles or even more, to other type of objects such as road signals. Experiments have shown very good accuracy when tested in real environments with different kind of door handles. With respect to the second contribution, a new technique to construct a topological map during the exploration phase a robot would perform on an unseen office-like environment is presented. Firstly a preliminary approach proposed to merge the Markovian localisation in a distributed system, which requires low storage and computational resources and is adequate to be applied in dynamic environments. In the same area, a second contribution to terrain inspection level behaviour based navigation concerned to the development of an automatic mapping method for acquiring the procedural topological map. The new approach is based on a typicality test called INCA to perform the so called loop-closing action. The method was integrated in a behaviour-based control architecture and tested in both, simulated and real robot/environment system. The developed system proved to be useful also for localisation purpose

Low to medium level image processing for a mobile robot

The use of visual perception in autonomous mobile systems was approached with caution by mobile robot developers because of the high computational cost and huge memory requirements of most image processing operations. When used, the image processing is implemented on multiprocessors or complex and expensive systems, thereby requiring the robot to be wired or radio controlled from the computer system base

Perception Framework for Activities of Daily Living Manipulation Tasks

There is an increasing concern in tackling the problems faced by the elderly community and physically in-locked people to lead an independent life experience problems with self- care. The need for developing service robots that can help people with mobility impairments is hence very essential. Developing a control framework for shared human-robot autonomy will allow locked-in individuals to perform the Activities of Daily Living (ADL) in a exible way. The relevant ADL scenarios were identi ed as handling objects, self-feeding, and opening doors for indoor nav- igation assistance. Multiple experiments were conducted, which demonstrates that the robot executes these daily living tasks reliably without requiring adjustment to the environment. The indoor manipulation tasks hold the challenge of dealing with a wide range of unknown objects. This thesis presents a framework developed for grasping without requiring a priori knowledge of the objects being manipulated. A successful manipulation task requires the combination of aspects such as envi- ronment modeling, object detection with pose estimation, grasp planning, motion planning followed by an e?cient grasp execution, which is validated by a 6+2 Degree of Freedom robotic manipulator

Ground robotics in tunnels: Keys and lessons learned after 10 years of research and experiments

The work reported in this article describes the research advances and the lessons learned by the Robotics, Perception and Real-Time group over a decade of research in the field of ground robotics in confined environments. This study has primarily focused on localization, navigation, and communications in tunnel-like environments. As will be discussed, this type of environment presents several special characteristics that often make well-established techniques fail. The aim is to share, in an open way, the experience, errors, and successes of this group with the robotics community so that those that work in such environments can avoid (some of) the errors made. At the very least, these findings can be readily taken into account when designing a solution, without needing to sift through the technical details found in the papers cited within this text

Perception and localization techniques for navigation in agricultural environment and experimental results

Notoriously, the agricultural work environment is very hard, where the operator manually carry out any job, often in extreme weather conditions or anyway heat, cold and rain, or simply where the working hours last from dawn to sunset. Recently, the application of automation in agriculture is leading to the development of increasingly autonomous robots, able to take care of different tasks and avoid obstacles, to collaborate and interact with human operators and collect data from the surrounding environment. The latter can then be shared with the user, informing him about the soil moisture rather than the critical health conditions of a single plant. Thus borns the concept of precision agriculture, in which the robot performs its tasks according to the environment conditions it detects, distributing fertilizers or water only where necessary and optimizing treatments and its energy resources. The proposed thesis project consists in the development of a tractor prototype able to automatically act in agricultural semi-structured environment, like orchards organized in rows, and navigating autonomously by means of a laser scanner. In particular, the work is divided into three steps. The first consists in design and construction of a tracked robot, which has been completely realized in the laboratory, from mechanical, electric and electronic subsystems up to the software structure. The second is the development of a navigation and control system, which makes a generic robot able to move autonomously in the orchard using a laser scanner as main sensor. To achieve this goal, a localization algorithm based on rows estimation has been developed. Moreover, a control law has been designed, which regulates the kinematics of the robot. Once the navigation algorithm has been defined, it is necessary to validate it. Indeed, third point consists of experimental tests, with the aim of testing both robot and developed navigation algorithm

Application of computer vision for roller operation management

Compaction is the last and possibly the most important phase in construction of asphalt concrete (AC) pavements. Compaction densifies the loose (AC) mat, producing a stable surface with low permeability. The process strongly affects the AC performance properties. Too much compaction may cause aggregate degradation and low air void content facilitating bleeding and rutting. On the other hand too little compaction may result in higher air void content facilitating oxidation and water permeability issues, rutting due to further densification by traffic and reduced fatigue life. Therefore, compaction is a critical issue in AC pavement construction.;The common practice for compacting a mat is to establish a roller pattern that determines the number of passes and coverages needed to achieve the desired density. Once the pattern is established, the roller\u27s operator must maintain the roller pattern uniformly over the entire mat.;Despite the importance of uniform compaction to achieve the expected durability and performance of AC pavements, having the roller operator as the only mean to manage the operation can involve human errors.;With the advancement of technology in recent years, the concept of intelligent compaction (IC) was developed to assist the roller operators and improve the construction quality. Commercial IC packages for construction rollers are available from different manufacturers. They can provide precise mapping of a roller\u27s location and provide the roller operator with feedback during the compaction process.;Although, the IC packages are able to track the roller passes with impressive results, there are also major hindrances. The high cost of acquisition and potential negative impact on productivity has inhibited implementation of IC.;This study applied computer vision technology to build a versatile and affordable system to count and map roller passes. An infrared camera is mounted on top of the roller to capture the operator view. Then, in a near real-time process, image features were extracted and tracked to estimate the incremental rotation and translation of the roller. Image featured are categorized into near and distant features based on the user defined horizon. The optical flow is estimated for near features located in the region below the horizon. The change in roller\u27s heading is constantly estimated from the distant features located in the sky region. Using the roller\u27s rotation angle, the incremental translation between two frames will be calculated from the optical flow. The roller\u27s incremental rotation and translation will put together to develop a tracking map.;During system development, it was noted that in environments with thermal uniformity, the background of the IR images exhibit less featured as compared to images captured with optical cameras which are insensitive to temperature. This issue is more significant overnight, since nature elements are not able to reflect the heat energy from sun. Therefore to improve roller\u27s heading estimation where less features are available in the sky region a unique methodology that allows heading detection based on the asphalt mat edges was developed for this research. The heading measurements based on the slope of the asphalt hot edges will be added to the pool of the headings measured from sky region. The median of all heading measurements will be used as the incremental roller\u27s rotation for the tracking analysis.;The record of tracking data is used for QC/QA purposes and verifying the proper implementation of the roller pattern throughout a job constructed under the roller pass specifications.;The system developed during this research was successful in mapping roller location for few projects tested. However the system should be independently validated