Multirate Frequency Transformations: Wideband AM-FM Demodulation with Applications to Signal Processing and Communications

The AM-FM (amplitude & frequency modulation) signal model finds numerous applications in image processing, communications, and speech processing. The traditional approaches towards demodulation of signals in this category are the analytic signal approach, frequency tracking, or the energy operator approach. These approaches however, assume that the amplitude and frequency components are slowly time-varying, e.g., narrowband and incur significant demodulation error in the wideband scenarios. In this thesis, we extend a two-stage approach towards wideband AM-FM demodulation that combines multirate frequency transformations (MFT) enacted through a combination of multirate systems with traditional demodulation techniques, e.g., the Teager-Kasiser energy operator demodulation (ESA) approach to large wideband to narrowband conversion factors. The MFT module comprises of multirate interpolation and heterodyning and converts the wideband AM-FM signal into a narrowband signal, while the demodulation module such as ESA demodulates the narrowband signal into constituent amplitude and frequency components that are then transformed back to yield estimates for the wideband signal. This MFT-ESA approach is then applied to the various problems of: (a) wideband image demodulation and fingerprint demodulation, where multidimensional energy separation is employed, (b) wideband first-formant demodulation in vowels, and (c) wideband CPM demodulation with partial response signaling, to demonstrate its validity in both monocomponent and multicomponent scenarios as an effective multicomponent AM-FM signal demodulation and analysis technique for image processing, speech processing, and communications based applications

Capacity -based parameter optimization of bandwidth constrained CPM

Continuous phase modulation (CPM) is an attractive modulation choice for bandwidth limited systems due to its small side lobes, fast spectral decay and the ability to be noncoherently detected. Furthermore, the constant envelope property of CPM permits highly power efficient amplification. The design of bit-interleaved coded continuous phase modulation is characterized by the code rate, modulation order, modulation index, and pulse shape. This dissertation outlines a methodology for determining the optimal values of these parameters under bandwidth and receiver complexity constraints. The cost function used to drive the optimization is the information-theoretic minimum ratio of energy-per-bit to noise-spectral density found by evaluating the constrained channel capacity. The capacity can be reliably estimated using Monte Carlo integration. A search for optimal parameters is conducted over a range of coded CPM parameters, bandwidth efficiencies, and channels. Results are presented for a system employing a trellis-based coherent detector. To constrain complexity and allow any modulation index to be considered, a soft output differential phase detector has also been developed.;Building upon the capacity results, extrinsic information transfer (EXIT) charts are used to analyze a system that iterates between demodulation and decoding. Convergence thresholds are determined for the iterative system for different outer convolutional codes, alphabet sizes, modulation indices and constellation mappings. These are used to identify the code and modulation parameters with the best energy efficiency at different spectral efficiencies for the AWGN channel. Finally, bit error rate curves are presented to corroborate the capacity and EXIT chart designs

Trellis coding with Continuous Phase Modulation (CPM) for satellite-based land-mobile communications

This volume of the final report summarizes the results of our studies on the satellite-based mobile communications project. It includes: a detailed analysis, design, and simulations of trellis coded, full/partial response CPM signals with/without interleaving over various Rician fading channels; analysis and simulation of computational cutoff rates for coherent, noncoherent, and differential detection of CPM signals; optimization of the complete transmission system; analysis and simulation of power spectrum of the CPM signals; design and development of a class of Doppler frequency shift estimators; design and development of a symbol timing recovery circuit; and breadboard implementation of the transmission system. Studies prove the suitability of the CPM system for mobile communications

Sparse graph-based coding schemes for continuous phase modulations

The use of the continuous phase modulation (CPM) is interesting when the channel represents a strong non-linearity and in the case of limited spectral support; particularly for the uplink, where the satellite holds an amplifier per carrier, and for downlinks where the terminal equipment works very close to the saturation region. Numerous studies have been conducted on this issue but the proposed solutions use iterative CPM demodulation/decoding concatenated with convolutional or block error correcting codes. The use of LDPC codes has not yet been introduced. Particularly, no works, to our knowledge, have been done on the optimization of sparse graph-based codes adapted for the context described here. In this study, we propose to perform the asymptotic analysis and the design of turbo-CPM systems based on the optimization of sparse graph-based codes. Moreover, an analysis on the corresponding receiver will be done

A likelihood ratio analysis of digital phase modulation

Bibliography: p. 180-188.Although the likelihood ratio forms the theoretical basis for maximum likelihood (ML) detection in coherent digital communication systems, it has not been applied directly to the problem of designing good trellis-coded modulation (TOM) schemes. The remarkably simple optimal receiver of minimum shift keying (MSK) has been shown to result from the mathematical simplification of its likelihood ratio into a single term. The log-likelihood ratio then becomes a linear sum of metrics which can be implemented as a so-called simplified receiver, comprising only a few adders and delay elements. This thesis project investigated the possible existence of coded modulation schemes with similarly simplifying likelihood ratios, which would have almost trivially simple receivers compared to the Viterbi decoders which are typically required for maximum likelihood sequence estimation (MLSE). A useful notation, called the likelihood transform, was presented to aid the analysis of likelihood ratios. The work concentrated initially on computer-aided searches, first for trellis codes which may give rise to simplifying likelihood ratios for continuous phase modulation (CPM), and then for mathematical identities which may aid in the simplification of generic likelihood ratios for equal-energy modulation. The first search yielded no simplified receivers, and all the identities produced by the second search had structures similar to the likelihood ratio of MSK. These observations prompted a formal proof of the non-existence of simplified receivers which use information from more than two symbols in their observation period. This result strictly bounds the error performance that is possible with a simplified receiver. It was also proved that simplified receivers are only optimal for modulation schemes which use no more than two pairs of antipodal signals, and that only binary modulation schemes can have simplified receivers which use information from all the symbols in their observation period

NASA space station automation: AI-based technology review

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures

Active Learning in Cognitive Radio Networks

In this thesis, numerous Machine Learning (ML) applications for Cognitive Radios Networks (CRNs) are developed and presented which facilitate the e cient spectral coexistence of a legacy system, the Primary Users (PUs), and a CRN, the Secondary Users (SUs). One way to better exploit the capacity of the legacy system frequency band is to consider a coexistence scenario using underlay Cognitive Radio (CR) techniques, where SUs may transmit in the frequency band of the PU system as long as the induced to the PU interference is under a certain limit and thus does not harmfully a ect the legacy system operability