878 research outputs found

    Evaluation of bistable systems versus matched filters in detecting bipolar pulse signals

    Full text link
    This paper presents a thorough evaluation of a bistable system versus a matched filter in detecting bipolar pulse signals. The detectability of the bistable system can be optimized by adding noise, i.e. the stochastic resonance (SR) phenomenon. This SR effect is also demonstrated by approximate statistical detection theory of the bistable system and corresponding numerical simulations. Furthermore, the performance comparison results between the bistable system and the matched filter show that (a) the bistable system is more robust than the matched filter in detecting signals with disturbed pulse rates, and (b) the bistable system approaches the performance of the matched filter in detecting unknown arrival times of received signals, with an especially better computational efficiency. These significant results verify the potential applicability of the bistable system in signal detection field.Comment: 15 pages, 9 figures, MikTex v2.

    The beamformer and correlator for the Large European Array for Pulsars

    Get PDF
    The Large European Array for Pulsars combines Europe's largest radio telescopes to form a tied-array telescope that provides high signal-to-noise observations of millisecond pulsars (MSPs) with the objective to increase the sensitivity of detecting low-frequency gravitational waves. As part of this endeavor we have developed a software correlator and beamformer which enables the formation of a tied-array beam from the raw voltages from each of telescopes. We explain the concepts and techniques involved in the process of adding the raw voltages coherently. We further present the software processing pipeline that is specifically designed to deal with data from widely spaced, inhomogeneous radio telescopes and describe the steps involved in preparing, correlating and creating the tied-array beam. This includes polarization calibration, bandpass correction, frequency dependent phase correction, interference mitigation and pulsar gating. A link is provided where the software can be obtained.Comment: 10 pages, 6 figures, accepted for publication in Astronomy and Computin

    Digital Signal Processing Research Program

    Get PDF
    Contains table of contents for Section 2, an introduction, reports on twenty-two research projects and a list of publications.Sanders, a Lockheed-Martin Corporation Contract BZ4962U.S. Army Research Laboratory Contract DAAL01-96-2-0001U.S. Navy - Office of Naval Research Grant N00014-93-1-0686National Science Foundation Grant MIP 95-02885U.S. Navy - Office of Naval Research Grant N00014-96-1-0930National Defense Science and Engineering FellowshipU.S. Air Force - Office of Scientific Research Grant F49620-96-1-0072U.S. Navy - Office of Naval Research Grant N00014-95-1-0362National Science Foundation Graduate Research FellowshipAT&T Bell Laboratories Graduate Research FellowshipU.S. Army Research Laboratory Contract DAAL01-96-2-0002National Science Foundation Graduate FellowshipU.S. Army Research Laboratory/Advanced Sensors Federated Lab Program Contract DAAL01-96-2-000

    Sequence Domain Harmonic Modeling of Type-IV Wind Turbines

    Get PDF

    Simulation of optoelectronic oscillator injection locking, pulling and spiking phenomena

    Full text link
    Complex envelope and reduced phase simulation models describing the dynamical behavior of an optoelectronic oscillator (OEO) under injection by an external source are described. The models are built on the foundations of a previously reported delay integral differential equation (DDE) theory of injection locking of time delay oscillators (TDO) such as the OEO. The DDE formulation is particularly amenable to high precision simulation using the Simulink block diagram environment. The correspondence between the blocks and the oscillator components offers intuition and considerable freedom to explore different circuit architectures and design variations with minimal coding effort. The simulations facilitate the study of the profound effect the multimode nature of a TDO has on its dynamical behavior. The reduced phase models that make use of the Leeson approximation are generally successful in reproducing the results of complex envelope models for established oscillations except for spiking phenomena for which the Leeson approximation fails. Simulation results demonstrating phenomena not captured by classical injection theory are presented, including multimode oscillation, the appearance of sidemodes in the RF and phase noise spectrum, and persistent spike trains redolent of recent experimental observations of 2pi phase pulse trains in a broadband OEO under injection

    Entanglement Stabilization using Parity Detection and Real-Time Feedback in Superconducting Circuits

    Full text link
    Fault tolerant quantum computing relies on the ability to detect and correct errors, which in quantum error correction codes is typically achieved by projectively measuring multi-qubit parity operators and by conditioning operations on the observed error syndromes. Here, we experimentally demonstrate the use of an ancillary qubit to repeatedly measure the ZZZZ and XXXX parity operators of two data qubits and to thereby project their joint state into the respective parity subspaces. By applying feedback operations conditioned on the outcomes of individual parity measurements, we demonstrate the real-time stabilization of a Bell state with a fidelity of F≈74%F\approx 74\% in up to 12 cycles of the feedback loop. We also perform the protocol using Pauli frame updating and, in contrast to the case of real-time stabilization, observe a steady decrease in fidelity from cycle to cycle. The ability to stabilize parity over multiple feedback rounds with no reduction in fidelity provides strong evidence for the feasibility of executing stabilizer codes on timescales much longer than the intrinsic coherence times of the constituent qubits.Comment: 12 pages, 10 figures. Update: Fig. 5 correcte

    Revealing the Dynamic Magneto-ionic Environments of Repeating Fast Radio Burst Sources through Multi-year Polarimetric Monitoring with CHIME/FRB

    Full text link
    Fast radio bursts (FRBs) display a confounding variety of burst properties and host galaxy associations. Repeating FRBs offer insight into the FRB population by enabling spectral, temporal and polarimetric properties to be tracked over time. Here, we report on the polarized observations of 12 repeating sources using multi-year monitoring with the Canadian Hydrogen Intensity Mapping Experiment (CHIME) over 400-800 MHz. We observe significant RM variations from many sources in our sample, including RM changes of several hundred rad m−2\rm{rad\, m^{-2}} over month timescales from FRBs 20181119A, 20190303A and 20190417A, and more modest RM variability (ΔRM≲\rm{\Delta RM \lesssim} few tens rad m−2^{-2}) from FRBs 20181030A, 20190208A, 20190213B and 20190117A over equivalent timescales. Several repeaters display a frequency dependent degree of linear polarization that is consistent with depolarization via scattering. Combining our measurements of RM variations with equivalent constraints on DM variability, we estimate the average line-of-sight magnetic field strength in the local environment of each repeater. In general, repeating FRBs display RM variations that are more prevalent/extreme than those seen from radio pulsars in the Milky Way and the Magellanic Clouds, suggesting repeating FRBs and pulsars occupy distinct magneto-ionic environments
    • …
    corecore