Methods and Tools for Objective Assessment of Psychomotor Skills in Laparoscopic Surgery

Training and assessment paradigms for laparoscopic surgical skills are evolving from traditional mentor–trainee tutorship towards structured, more objective and safer programs. Accreditation of surgeons requires reaching a consensus on metrics and tasks used to assess surgeons’ psychomotor skills. Ongoing development of tracking systems and software solutions has allowed for the expansion of novel training and assessment means in laparoscopy. The current challenge is to adapt and include these systems within training programs, and to exploit their possibilities for evaluation purposes. This paper describes the state of the art in research on measuring and assessing psychomotor laparoscopic skills. It gives an overview on tracking systems as well as on metrics and advanced statistical and machine learning techniques employed for evaluation purposes. The later ones have a potential to be used as an aid in deciding on the surgical competence level, which is an important aspect when accreditation of the surgeons in particular, and patient safety in general, are considered. The prospective of these methods and tools make them complementary means for surgical assessment of motor skills, especially in the early stages of training. Successful examples such as the Fundamentals of Laparoscopic Surgery should help drive a paradigm change to structured curricula based on objective parameters. These may improve the accreditation of new surgeons, as well as optimize their already overloaded training schedules

Validation of a Sensorized Instrument-Based Training System for Minimally Invasive Surgery

Minimally invasive surgery training is complicated by the restraints imposed by the surgical environment. A sensorized laparoscopic instrument capable of sensing force in 5 degrees of freedom and position in 6 degrees of freedom was evaluated. Novice and Expert laparoscopists performed a complex minimally invasive surgical task - suturing - using the novel instruments. Their force and position profiles were compared. The novel minimally invasive surgical instrument is construct-valid and capable of detecting differences between novices and experts in a laparoscopic suturing task with respect to force and position. It is also concurrently valid with an existing standard: the Fundamentals of Laparoscopic Skills. Further evaluation is mandated to better understand the ability to predict performance based on force and position as well as the potential for new metrics in minimally invasive surgical education

Design of a pressure sensing laparoscopic grasper

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 34).With smaller incisions, laparoscopic, or minimally invasive, surgery is considered safer for patients than open surgery. However, the safety of current laparoscopic grasping instruments can still be improved. Current devices provide surgeons with limited tactile feedback, and the current alligator-style jaws create pinch points that can lead to torn or damaged tissue. Additionally, the angled jaws can result in excessive grasping forces, due to the uneven pressure distribution along the jaws, or slippage when grasping larger organs. Tissue trauma, in the form of mechanical injury (crushing), ischemia (cut off blood supply), or perforation, can occur. A new design uses a symmetric, 10-bar linkage to keep the grasping jaws parallel, creating a uniform pressure distribution along the length of the jaws. A pressure sensor, located near the trigger in the handle, can detect when the grasper jaws are applying too much force on an object. When the force is above a given threshold, a vibration motor in the handle activates, warning the surgeon. This improved tactile feedback can help surgeons control pressures applied during grasping. The grasper design is further enhanced through an ergonomic pistol-grip handle, which also includes a turning wheel to rotate the grasper and a locking mechanism to fix the jaws in place. A working lx scale prototype was built to verify the feasibility of the design.by Caitlin J. Reyda.S.B

A Human Gesture Mapping Method to Control a Multi‐Functional Hand for Robot‐Assisted Laparoscopic Surgery: The MUSHA Case

This work presents a novel technique to control multi-functional hand for robot-assisted laparoscopic surgery. We tested the technique using the MUSHA multi-functional hand, a robot-aided minimally invasive surgery tool with more degrees of freedom than the standard commercial end-effector of the da Vinci robot. Extra degrees of freedom require the development of a proper control strategy to guarantee high performance and avoid an increasing complexity of control consoles. However, developing reliable control algorithms while reducing the control side's mechanical complexity is still an open challenge. In the proposed solution, we present a control strategy that projects the human hand motions into the robot actuation space. The human hand motions are tracked by a LeapMotion camera and mapped into the actuation space of the virtualized end-effector. The effectiveness of the proposed method was evaluated in a twofold manner. Firstly, we verified the Lyapunov stability of the algorithm, then an user study with 10 subjects assessed the intuitiveness and usability of the system

Electromyographic response is altered during robotic surgical training with augmented feedback

There is a growing prevalence of robotic systems for surgical laparoscopy. We previously developed quantitative measures to assess robotic surgical proficiency, and used augmented feedback to enhance training to reduce applied grip force and increase speed. However, there is also a need to understand the physiological demands of the surgeon during robotic surgery, and if training can reduce these demands. Therefore, the goal of this study was to use clinical biomechanical techniques via electromyography (EMG) to investigate the effects of real-time augmented visual feedback during short-term training on muscular activation and fatigue. Twenty novices were trained in three inanimate surgical tasks with the da Vinci Surgical System. Subjects were divided into five feedback groups (speed, relative phase, grip force, video, and control). Time- and frequency-domain EMG measures were obtained before and after training. Surgical training decreased muscle work as found from mean EMG and EMG envelopes. Grip force feedback further reduced average and total muscle work, while speed feedback increased average muscle work and decreased total muscle work. Training also increased the median frequency response as a result of increased speed and/or reduced fatigue during each task. More diverse motor units were recruited as revealed by increases in the frequency bandwidth post-training. We demonstrated that clinical biomechanics using EMG analysis can help to better understand the effects of training for robotic surgery. Real-time augmented feedback during training can further reduce physiological demands. Future studies will investigate other means of feedback such as biofeedback of EMG during robotic surgery training

Electromyographic response is altered during robotic surgical training with augmented feedback

There is a growing prevalence of robotic systems for surgical laparoscopy. We previously developed quantitative measures to assess robotic surgical proficiency, and used augmented feedback to enhance training to reduce applied grip force and increase speed. However, there is also a need to understand the physiological demands of the surgeon during robotic surgery, and if training can reduce these demands. Therefore, the goal of this study was to use clinical biomechanical techniques via electromyography (EMG) to investigate the effects of real-time augmented visual feedback during short-term training on muscular activation and fatigue. Twenty novices were trained in three inanimate surgical tasks with the da Vinci Surgical System. Subjects were divided into five feedback groups (speed, relative phase, grip force, video, and control). Time- and frequency-domain EMG measures were obtained before and after training. Surgical training decreased muscle work as found from mean EMG and EMG envelopes. Grip force feedback further reduced average and total muscle work, while speed feedback increased average muscle work and decreased total muscle work. Training also increased the median frequency response as a result of increased speed and/or reduced fatigue during each task. More diverse motor units were recruited as revealed by increases in the frequency bandwidth post-training. We demonstrated that clinical biomechanics using EMG analysis can help to better understand the effects of training for robotic surgery. Real-time augmented feedback during training can further reduce physiological demands. Future studies will investigate other means of feedback such as biofeedback of EMG during robotic surgery training

Haptics in Robot-Assisted Surgery: Challenges and Benefits

Robotic surgery is transforming the current surgical practice, not only by improving the conventional surgical methods but also by introducing innovative robot-enhanced approaches that broaden the capabilities of clinicians. Being mainly of man-machine collaborative type, surgical robots are seen as media that transfer pre- and intra-operative information to the operator and reproduce his/her motion, with appropriate filtering, scaling, or limitation, to physically interact with the patient. The field, however, is far from maturity and, more critically, is still a subject of controversy in medical communities. Limited or absent haptic feedback is reputed to be among reasons that impede further spread of surgical robots. In this paper objectives and challenges of deploying haptic technologies in surgical robotics is discussed and a systematic review is performed on works that have studied the effects of providing haptic information to the users in major branches of robotic surgery. It has been tried to encompass both classical works and the state of the art approaches, aiming at delivering a comprehensive and balanced survey both for researchers starting their work in this field and for the experts

Robot Assisted Object Manipulation for Minimally Invasive Surgery

Robotic systems have an increasingly important role in facilitating minimally invasive surgical treatments. In robot-assisted minimally invasive surgery, surgeons remotely control instruments from a console to perform operations inside the patient. However, despite the advanced technological status of surgical robots, fully autonomous systems, with decision-making capabilities, are not yet available. In 2017, a structure to classify the research efforts toward autonomy achievable with surgical robots was proposed by Yang et al. Six different levels were identified: no autonomy, robot assistance, task autonomy, conditional autonomy, high autonomy, and full autonomy. All the commercially available platforms in robot-assisted surgery is still in level 0 (no autonomy). Despite increasing the level of autonomy remains an open challenge, its adoption could potentially introduce multiple benefits, such as decreasing surgeons’ workload and fatigue and pursuing a consistent quality of procedures. Ultimately, allowing the surgeons to interpret the ample and intelligent information from the system will enhance the surgical outcome and positively reflect both on patients and society. Three main aspects are required to introduce automation into surgery: the surgical robot must move with high precision, have motion planning capabilities and understand the surgical scene. Besides these main factors, depending on the type of surgery, there could be other aspects that might play a fundamental role, to name some compliance, stiffness, etc. This thesis addresses three technological challenges encountered when trying to achieve the aforementioned goals, in the specific case of robot-object interaction. First, how to overcome the inaccuracy of cable-driven systems when executing fine and precise movements. Second, planning different tasks in dynamically changing environments. Lastly, how the understanding of a surgical scene can be used to solve more than one manipulation task. To address the first challenge, a control scheme relying on accurate calibration is implemented to execute the pick-up of a surgical needle. Regarding the planning of surgical tasks, two approaches are explored: one is learning from demonstration to pick and place a surgical object, and the second is using a gradient-based approach to trigger a smoother object repositioning phase during intraoperative procedures. Finally, to improve scene understanding, this thesis focuses on developing a simulation environment where multiple tasks can be learned based on the surgical scene and then transferred to the real robot. Experiments proved that automation of the pick and place task of different surgical objects is possible. The robot was successfully able to autonomously pick up a suturing needle, position a surgical device for intraoperative ultrasound scanning and manipulate soft tissue for intraoperative organ retraction. Despite automation of surgical subtasks has been demonstrated in this work, several challenges remain open, such as the capabilities of the generated algorithm to generalise over different environment conditions and different patients

Adaptive Human Control Gains During Precision Grip

Eight human test subjects attempted to track a desired position trajectory with an instrumented manipulandum (MN). The test subjects used the MN with three different levels of stiffness. A transfer function was developed to represent the human application of a precision grip from the data when the test subjects initially displaced the MN so as to learn the position mapping from the MN onto the display. Another transfer function was formed from the data of the remainder of the experiments, after significant displacement of the MN occurred. Both of these transfer functions accurately modelled the system dynamics for a portion of the experiments, but neither was accurate for the duration of the experiments because the human grip dynamics changed while learning the position mapping. Thus, an adaptive system model was developed to describe the learning process of the human test subjects as they displaced the MN in order to gain knowledge of the position mapping. The adaptive system model was subsequently validated following comparison with the human test subject data. An examination of the average absolute error between the position predicted by the adaptive model and the actual experimental data yielded an overall average error of 0.34mm for all three levels of stiffness