83,821 research outputs found
MONICA in Hamburg: Towards Large-Scale IoT Deployments in a Smart City
Modern cities and metropolitan areas all over the world face new management
challenges in the 21st century primarily due to increasing demands on living
standards by the urban population. These challenges range from climate change,
pollution, transportation, and citizen engagement, to urban planning, and
security threats. The primary goal of a Smart City is to counteract these
problems and mitigate their effects by means of modern ICT to improve urban
administration and infrastructure. Key ideas are to utilise network
communication to inter-connect public authorities; but also to deploy and
integrate numerous sensors and actuators throughout the city infrastructure -
which is also widely known as the Internet of Things (IoT). Thus, IoT
technologies will be an integral part and key enabler to achieve many
objectives of the Smart City vision.
The contributions of this paper are as follows. We first examine a number of
IoT platforms, technologies and network standards that can help to foster a
Smart City environment. Second, we introduce the EU project MONICA which aims
for demonstration of large-scale IoT deployments at public, inner-city events
and give an overview on its IoT platform architecture. And third, we provide a
case-study report on SmartCity activities by the City of Hamburg and provide
insights on recent (on-going) field tests of a vertically integrated,
end-to-end IoT sensor application.Comment: 6 page
Wireless sensors and IoT platform for intelligent HVAC control
Energy consumption of buildings (residential and non-residential) represents approximately 40% of total world electricity consumption, with half of this energy consumed by HVAC systems. Model-Based Predictive Control (MBPC) is perhaps the technique most often proposed for HVAC control, since it offers an enormous potential for energy savings. Despite the large number of papers on this topic during the last few years, there are only a few reported applications of the use of MBPC for existing buildings, under normal occupancy conditions and, to the best of our knowledge, no commercial solution yet. A marketable solution has been recently presented by the authors, coined the IMBPC HVAC system. This paper describes the design, prototyping and validation of two components of this integrated system, the Self-Powered Wireless Sensors and the IOT platform developed. Results for the use of IMBPC in a real building under normal occupation demonstrate savings in the electricity bill while maintaining thermal comfort during the whole occupation schedule.QREN SIDT [38798]; Portuguese Foundation for Science & Technology, through IDMEC, under LAETA [ID/EMS/50022/2013
Recent advances in industrial wireless sensor networks towards efficient management in IoT
With the accelerated development of Internet-of- Things (IoT), wireless sensor networks (WSN) are gaining importance in the continued advancement of information and communication technologies, and have been connected and integrated with Internet in vast industrial applications. However, given the fact that most wireless sensor devices are resource constrained and operate on batteries, the communication overhead and power consumption are therefore important issues for wireless sensor networks design. In order to efficiently manage these wireless sensor devices in a unified manner, the industrial authorities should be able to provide a network infrastructure supporting various WSN applications and services that facilitate the management of sensor-equipped real-world entities. This paper presents an overview of industrial ecosystem, technical architecture, industrial device management standards and our latest research activity in developing a WSN management system. The key approach to enable efficient and reliable management of WSN within such an infrastructure is a cross layer design of lightweight and cloud-based RESTful web service
Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms
The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications
PhyNetLab: An IoT-Based Warehouse Testbed
Future warehouses will be made of modular embedded entities with
communication ability and energy aware operation attached to the traditional
materials handling and warehousing objects. This advancement is mainly to
fulfill the flexibility and scalability needs of the emerging warehouses.
However, it leads to a new layer of complexity during development and
evaluation of such systems due to the multidisciplinarity in logistics,
embedded systems, and wireless communications. Although each discipline
provides theoretical approaches and simulations for these tasks, many issues
are often discovered in a real deployment of the full system. In this paper we
introduce PhyNetLab as a real scale warehouse testbed made of cyber physical
objects (PhyNodes) developed for this type of application. The presented
platform provides a possibility to check the industrial requirement of an
IoT-based warehouse in addition to the typical wireless sensor networks tests.
We describe the hardware and software components of the nodes in addition to
the overall structure of the testbed. Finally, we will demonstrate the
advantages of the testbed by evaluating the performance of the ETSI compliant
radio channel access procedure for an IoT warehouse
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
Middleware Technologies for Cloud of Things - a survey
The next wave of communication and applications rely on the new services
provided by Internet of Things which is becoming an important aspect in human
and machines future. The IoT services are a key solution for providing smart
environments in homes, buildings and cities. In the era of a massive number of
connected things and objects with a high grow rate, several challenges have
been raised such as management, aggregation and storage for big produced data.
In order to tackle some of these issues, cloud computing emerged to IoT as
Cloud of Things (CoT) which provides virtually unlimited cloud services to
enhance the large scale IoT platforms. There are several factors to be
considered in design and implementation of a CoT platform. One of the most
important and challenging problems is the heterogeneity of different objects.
This problem can be addressed by deploying suitable "Middleware". Middleware
sits between things and applications that make a reliable platform for
communication among things with different interfaces, operating systems, and
architectures. The main aim of this paper is to study the middleware
technologies for CoT. Toward this end, we first present the main features and
characteristics of middlewares. Next we study different architecture styles and
service domains. Then we presents several middlewares that are suitable for CoT
based platforms and lastly a list of current challenges and issues in design of
CoT based middlewares is discussed.Comment: http://www.sciencedirect.com/science/article/pii/S2352864817301268,
Digital Communications and Networks, Elsevier (2017
- …