An Enhanced IEEE1588 Clock Synchronization for Link Delays Based on a System-on-Chip Platform

The clock synchronization is considered as a key technology in the time-sensitive networking (TSN) of 5G fronthaul. This paper proposes a clock synchronization enhancement method to optimize the link delays, in order to improve synchronization accuracy. First, all the synchronization dates are filtered twice to get the good calculation results in the processor, and then FPGA adjust the timer on the slave side to complete clock synchronization. This method is implemented by Xilinx Zynq UltraScale+ MPSoC (multiprocessor system-on-chip), using FPGA+ARM software and hardware co-design platform. The master and slave output Pulse Per-Second (PPS) signals. The synchronization accuracy was evaluated by measuring the time offset between PPS signals. Contraposing the TSN, this paper compares the performance of the proposed scheme with some previous methods to show the efficacy of the proposed work. The results show that the slave clock of proposed method is synchronized with the master clock, leading to better robustness and significant improvement in accuracy, with time offset within the range of 40 nanoseconds. This method can be applied to the time synchronization of the 5G open fronthaul network and meets some special service needs in 5G communication

A Survey on IEEE 1588 Implementation for RISC-V Low-Power Embedded Devices

IEEE 1588, also known as the Precision Time Protocol (PTP), is a standard protocol for clock synchronization in distributed systems. While it is not architecture-specific, implementing IEEE 1588 on Reduced Instruction Set Computer-V (RISC-V) low-power embedded devices demands considering the system requirements and available resources. This paper explores various approaches and techniques to achieve accurate time synchronization in such instruments. The analysis covers software and hardware implementations, discussing each method’s challenges, benefits, and trade-offs. By examining the state-of-the-art in this field, this paper provides valuable insights and guidance for researchers and engineers working on time-critical applications in RISC-V-based embedded systems, aiding in selecting the most-suitable stack for their designs.This work was partially supported by the ECSEL Joint Undertaking in the H2020 project IMOCO4.E, grant agreement No.10100731, and by the Basque Government within the fund for research groups of the Basque University System IT1440-22 and KK-2023/00015

Clock synchronisation for UWB and DECT communication networks

Synchronisation deals with the distribution of time and/or frequency across a network of nodes dispersed in an area, in order to align their clocks with respect to time and/or frequency. It remains an important requirement in telecommunication networks, especially in Time Division Duplexing (TDD) systems such as Ultra Wideband (UWB) and Digital Enhanced Cordless Telecommunications (DECT) systems. This thesis explores three di erent research areas related to clock synchronisation in communication networks; namely algorithm development and implementation, managing Packet Delay Variation (PDV), and coping with the failure of a master node. The first area proposes a higher-layer synchronisation algorithm in order to meet the specific requirements of a UWB network that is based on the European Computer Manufacturers Association (ECMA) standard. At up to 480 Mbps data rate, UWB is an attractive technology for multimedia streaming. Higher-layer synchronisation is needed in order to facilitate synchronised playback at the receivers and prevent distortion, but no algorithm is de ned in the ECMA-368 standard. In this research area, a higher-layer synchronisation algorithm is developed for an ECMA-368 UWB network. Network simulations and FPGA implementation are used to show that the new algorithm satis es the requirements of the network. The next research area looks at how PDV can be managed when Precision Time Protocol (PTP) is implemented in an existing Ethernet network. Existing literature indicates that the performance of a PDV ltering algorithm usually depends on the delay pro le of the network in which it is applied. In this research area, a new sample-mode PDV filter is proposed which is independent of the shape of the delay profile. Numerical simulations show that the sample-mode filtering algorithm is able to match or out-perform the existing sample minimum, mean, and maximum filters, at differentlevels of network load. Finally, the thesis considers the problem of dealing with master failures in a PTP network for a DECT audio application. It describes the existing master redundancy techniques and shows why they are unsuitable for the specific application. Then a new alternate master cluster technique is proposed along with an alternative BMCA to suit the application under consideration. Network simulations are used to show how this technique leads to a reduction in the total time to recover from a master failure

A Survey of Clock Synchronization Over Packet-Switched Networks

Clock synchronization is a prerequisite for the realization of emerging applications in various domains such as industrial automation and the intelligent power grid. This paper surveys the standardized protocols and technologies for providing synchronization of devices connected by packet-switched networks. A review of synchronization impairments and the state-of-the-art mechanisms to improve the synchronization accuracy is then presented. Providing microsecond to sub-microsecond synchronization accuracy under the presence of asymmetric delays in a cost-effective manner is a challenging problem, and still an open issue in many application scenarios. Further, security is of significant importance for systems where timing is critical. The security threats and solutions to protect exchanged synchronization messages are also discussed

Evaluation of IEEE 802.1 Time Sensitive Networking Performance for Microgrid and Smart Grid Power System Applications

Proliferation of distributed energy resources and the importance of smart energy management has led to increased interest in microgrids. A microgrid is an area of the grid that can be disconnected and operated independently from the main grid when required and can generate some or all of its own energy needs with distributed energy resources and battery storage. This allows for the microgrid area to continue operating even when the main grid is unavailable. In addition, often a microgrid can utilize waste heat from energy generation to drive thermal loads, further improving energy utilization. This leads to increased reliability and overall efficiency in the microgrid area.As microgrids (and by extension the smart grid) become more widespread, new methods of communication and control are required to aid in management of many different distributed entities. One such communication architecture that may prove useful is the set of IEEE 802.1 Time Sensitive Networking (TSN) standards. These standards specify improvements and new capabilities for LAN based communication networks that previously made them unsuitable for widespread deployment in a power system setting. These standards include specifications for low latency guarantees, clock synchronization, data frame redundancy, and centralized system administration. These capabilities were previously available on proprietary or application specific solutions. However, they will now be available as part of the Ethernet standard, enabling backwards compatibility with existing network architecture and support with future advances.Two of the featured standards, IEEE 802.1AS (governing time-synchronization) and IEEE 802.1Qbv (governing time aware traffic shaping), will be tested and evaluated for their potential utility in power systems and microgrid applications. These tests will measure the latency achievable using TSN over a network at various levels of congestion and compare these results with UDP and TCP protocols. In addition, the ability to use synchronized clocks to generate waveforms for microgrid inverter synchronization will be explored

Flexible Supervised Autonomy for Exploration in Subterranean Environments

While the capabilities of autonomous systems have been steadily improving in recent years, these systems still struggle to rapidly explore previously unknown environments without the aid of GPS-assisted navigation. The DARPA Subterranean (SubT) Challenge aimed to fast track the development of autonomous exploration systems by evaluating their performance in real-world underground search-and-rescue scenarios. Subterranean environments present a plethora of challenges for robotic systems, such as limited communications, complex topology, visually-degraded sensing, and harsh terrain. The presented solution enables long-term autonomy with minimal human supervision by combining a powerful and independent single-agent autonomy stack, with higher level mission management operating over a flexible mesh network. The autonomy suite deployed on quadruped and wheeled robots was fully independent, freeing the human supervision to loosely supervise the mission and make high-impact strategic decisions. We also discuss lessons learned from fielding our system at the SubT Final Event, relating to vehicle versatility, system adaptability, and re-configurable communications.Comment: Field Robotics special issue: DARPA Subterranean Challenge, Advancement and Lessons Learned from the Final

MediaSync: Handbook on Multimedia Synchronization

This book provides an approachable overview of the most recent advances in the fascinating field of media synchronization (mediasync), gathering contributions from the most representative and influential experts. Understanding the challenges of this field in the current multi-sensory, multi-device, and multi-protocol world is not an easy task. The book revisits the foundations of mediasync, including theoretical frameworks and models, highlights ongoing research efforts, like hybrid broadband broadcast (HBB) delivery and users' perception modeling (i.e., Quality of Experience or QoE), and paves the way for the future (e.g., towards the deployment of multi-sensory and ultra-realistic experiences). Although many advances around mediasync have been devised and deployed, this area of research is getting renewed attention to overcome remaining challenges in the next-generation (heterogeneous and ubiquitous) media ecosystem. Given the significant advances in this research area, its current relevance and the multiple disciplines it involves, the availability of a reference book on mediasync becomes necessary. This book fills the gap in this context. In particular, it addresses key aspects and reviews the most relevant contributions within the mediasync research space, from different perspectives. Mediasync: Handbook on Multimedia Synchronization is the perfect companion for scholars and practitioners that want to acquire strong knowledge about this research area, and also approach the challenges behind ensuring the best mediated experiences, by providing the adequate synchronization between the media elements that constitute these experiences