An investigation on the framework of dressing virtual humans

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Realistic human models are widely used in variety of applications. Much research has been carried out on improving realism of virtual humans from various aspects, such as body shapes, hair, and facial expressions and so on. In most occasions, these virtual humans need to wear garments. However, it is time-consuming and tedious to dress a human model using current software packages [Maya2004]. Several methods for dressing virtual humans have been proposed recently [Bourguignon2001, Turquin2004, Turquin2007 and Wang2003B]. The method proposed by Bourguignon et al [Bourguignon2001] can only generate 3D garment contour instead of 3D surface. The method presented by Turquin et al. [Turquin2004, Turquin2007] could generate various kinds of garments from sketches but their garments followed the shape of the body and the side of a garment looked not convincing because of using simple linear interpolation. The method proposed by Wang et al. [Wang2003B] lacked interactivity from users, so users had very limited control on the garment shape.This thesis proposes a framework for dressing virtual humans to obtain convincing dressing results, which overcomes problems existing in previous papers mentioned above by using nonlinear interpolation, level set-based shape modification, feature constraints and so on. Human models used in this thesis are reconstructed from real human body data obtained using a body scanning system. Semantic information is then extracted from human models to assist in generation of 3 dimensional (3D) garments. The proposed framework allows users to dress virtual humans using garment patterns and sketches. The proposed dressing method is based on semantic virtual humans. A semantic human model is a human body with semantic information represented by certain of structure and body features. The semantic human body is reconstructed from body scanned data from a real human body. After segmenting the human model into six parts some key features are extracted. These key features are used as constraints for garment construction.Simple 3D garment patterns are generated using the techniques of sweep and offset. To dress a virtual human, users just choose a garment pattern, which is put on the human body at the default position with a default size automatically. Users are allowed to change simple parameters to specify some sizes of a garment by sketching the desired position on the human body.To enable users to dress virtual humans by their own design styles in an intuitive way, this thesis proposes an approach for garment generation from user-drawn sketches. Users can directly draw sketches around reconstructed human bodies and then generates 3D garments based on user-drawn strokes. Some techniques for generating 3D garments and dressing virtual humans are proposed. The specific focus of the research lies in generation of 3D geometric garments, garment shape modification, local shape modification, garment surface processing and decoration creation. A sketch-based interface has been developed allowing users to draw garment contour representing the front-view shape of a garment, and the system can generate a 3D geometric garment surface accordingly. To improve realism of a garment surface, this thesis presents three methods as follows. Firstly, the procedure of garment vertices generation takes key body features as constraints. Secondly, an optimisation algorithm is carried out after generation of garment vertices to optimise positions of garment vertices. Finally, some mesh processing schemes are applied to further process the garment surface. Then, an elaborate 3D geometric garment surface can be obtained through this series of processing. Finally, this thesis proposes some modification and editing methods. The user-drawn sketches are processed into spline curves, which allow users to modify the existing garment shape by dragging the control points into desired positions. This makes it easy for users to obtain a more satisfactory garment shape compared with the existing one. Three decoration tools including a 3D pen, a brush and an embroidery tool, are provided letting users decorate the garment surface by adding some small 3D details such as brand names, symbols and so on. The prototype of the framework is developed using Microsoft Visual Studio C++,OpenGL and GPU programming

Progressive surface modeling scheme from unorganised curves

This paper presents a novel surface modelling scheme to construct a freeform surface progressively from unorganised curves representing the boundary and interior characteristic curves. The approach can construct a base surface model from four ordinary or composite boundary curves and support incremental surface updating from interior characteristic curves, some of which may not be on the final surface. The base surface is first constructed as a regular Coons surface and upon receiving an interior curve sketch, it is then updated. With this progressive modelling scheme, a final surface with multiple sub-surfaces can be obtained from a set of unorganised curves and transferred to commercial surface modelling software for detailed modification. The approach has been tested with examples based on 3D motion sketches; it is capable of dealing with unorganised design curves for surface modelling in conceptual design. Its limitations have been discussed

Integration of sketch-based ideation and 3D modeling with CAD systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis is concerned with the study of how sketch-based systems can be improved to enhance idea generation process in conceptual design stage. It is also concerned with achieving a kind of integration between sketch-based systems and CAD systems to complete the digitization of the design process as sketching phase is still not integrated with other phases due to the different nature of it and the incomplete digitization of sketching phase itself. Previous studies identified three main related issues: sketching process, sketch-based modeling, and the integration between the digitized design phases. Here, the thesis is motivated from the desire to improve sketch-based modeling to support idea generation process but unlike previous studies that only focused on the technical or drawing part of sketching, this thesis attempts to concentrate more on the mental part of the sketching process which play a key role in developing ideas in design. Another motivation of this thesis is to produce a kind of integration between sketch-based systems and CAD systems to enable 3D models produced by sketching to be edited in detailed design stage. As such, there are two main contributions have been addressed in this thesis. The first contribution is the presenting of a new approach in designing sketch-based systems that enable more support for idea generation by separating thinking and developing ideas from the 3D modeling process. This kind of separation allows designers to think freely and concentrate more on their ideas rather than 3D modeling. the second contribution is achieving a kind of integration between gesture-based systems and CAD systems by using an IGES file in exchanging data between systems and a new method to organize data within the file in an order that make it more understood by feature recognition embedded in commercial CAD systems.This study is funded by the Ministry of Higher Education of Egypt

Integration between Creativity and Engineering in Industrial Design

The objective of the paper is to illustrate which are the key issues today in the industrial design workflow, paying particular attention to the most creative part of the workflow, highlighting those nodes which still make hard the styling activities and giving a brief survey of the researches aimed at smoothing the transfer of the design intent along the whole design cycle and at providing tools even more adhering at the mentality of creative people. Based on the experience gained working in two different European projects, through the collaboration with industrial designers in the automotive and the household supplies fields, a general industrial design workflow will be depicted, highlighting the main differences between the automotive and non-automotive sectors; the problems still present in the design activity will be also illustrated. The paper includes short surveys, in relation to the aesthetic design, in matter of research activities aimed at - identifying the links between shape characteristics of a product and the transmitted emotions - better supporting, in a digital way, the 2D sketching phase and the automatic interpretation and transfer of the 2D sketches into a 3D surface model - improving the 3D Modeling phase

Parametric CAD modeling: An analysis of strategies for design reusability

CAD model quality in parametric design scenarios largely determines the level of flexibility and adaptability of a 3D model (how easy it is to alter the geometry) as well as its reusability (the ability to use existing geometry in other contexts and applications). In the context of mechanical CAD systems, the nature of the feature-based parametric modeling paradigm, which is based on parent-child interdependencies between features, allows a wide selection of approaches for creating a specific model. Despite the virtually unlimited range of possible strategies for modeling a part, only a small number of them can guarantee an appropriate internal structure which results in a truly reusable CAD model. In this paper, we present an analysis of formal CAD modeling strategies and best practices for history-based parametric design: Delphi's horizontal modeling, explicit reference modeling, and resilient modeling. Aspects considered in our study include the rationale to avoid the creation of unnecessary feature interdependencies, the sequence and selection criteria for those features, and the effects of parent/child relations on model alteration. We provide a comparative evaluation of these strategies in the form of a series of experiments using three industrial CAD models with different levels of complexity. We analyze the internal structure of the models and compare their robustness and flexibility when the geometry is modified. The results reveal significant advantages of formal modeling methodologies, particularly resilient techniques, over non-structured approaches as well as the unexpected problems of the horizontal strategy in numerous modeling situations. (C)2016 Elsevier Ltd. All rights reserved.Camba, JD.; Contero, M.; Company, P. (2016). Parametric CAD modeling: An analysis of strategies for design reusability. Computer-Aided Design. 74:18-31. doi:10.1016/j.cad.2016.01.003S18317