The benefit of 3D laser scanning technology in the generation and calibration of FEM models for health assessment of concrete structures

Terrestrial laser scanning technology (TLS) is a new technique for quickly getting three-dimensional information. In this paper we research the health assessment of concrete structures with a Finite Element Method (FEM) model based on TLS. The goal focuses on the benefits of 3D TLS in the generation and calibration of FEM models, in order to build a convenient, efficient and intelligent model which can be widely used for the detection and assessment of bridges, buildings, subways and other objects. After comparing the finite element simulation with surface-based measurement data from TLS, the FEM model is determined to be acceptable with an error of less than 5%. The benefit of TLS lies mainly in the possibility of a surface-based validation of results predicted by the FEM model

Development of Bridge Information Model (BrIM) for digital twinning and management using TLS technology

In the current modern era of information and technology, the concept of Building Information Model (BIM), has made revolutionary changes in different aspects of engineering design, construction, and management of infrastructure assets, especially bridges. In the field of bridge engineering, Bridge Information Model (BrIM), as a specific form of BIM, includes digital twining of the physical asset associated with geometrical inspections and non-geometrical data, which has eliminated the use of traditional paper-based documentation and hand-written reports, enabling professionals and managers to operate more efficiently and effectively. However, concerns remain about the quality of the acquired inspection data and utilizing BrIM information for remedial decisions in a reliable Bridge Management System (BMS) which are still reliant on the knowledge and experience of the involved inspectors, or asset manager, and are susceptible to a certain degree of subjectivity. Therefore, this research study aims not only to introduce the valuable benefits of Terrestrial Laser Scanning (TLS) as a precise, rapid, and qualitative inspection method, but also to serve a novel sliced-based approach for bridge geometric Computer-Aided Design (CAD) model extraction using TLS-based point cloud, and to contribute to BrIM development. Moreover, this study presents a comprehensive methodology for incorporating generated BrIM in a redeveloped element-based condition assessment model while integrating a Decision Support System (DSS) to propose an innovative BMS. This methodology was further implemented in a designed software plugin and validated by a real case study on the Werrington Bridge, a cable-stayed bridge in New South Wales, Australia. The finding of this research confirms the reliability of the TLS-derived 3D model in terms of quality of acquired data and accuracy of the proposed novel slice-based method, as well as BrIM implementation, and integration of the proposed BMS into the developed BrIM. Furthermore, the results of this study showed that the proposed integrated model addresses the subjective nature of decision-making by conducting a risk assessment and utilising structured decision-making tools for priority ranking of remedial actions. The findings demonstrated acceptable agreement in utilizing the proposed BMS for priority ranking of structural elements that require more attention, as well as efficient optimisation of remedial actions to preserve bridge health and safety

Application of TLS method in digitization of bridge infrastructures : a path to BrIM development

Over the past years, bridge inspection practices and condition assessments were predi-cated upon long-established manual and paper-based data collection methods which were generally unsafe, time-consuming, imprecise, and labor-intensive, influenced by the experience of the trained inspectors involved. In recent years, the ability to turn an actual civil infrastructure asset into a detailed and precise digital model using state-of-the-art emerging technologies such as laser scanners has become in demand among structural engineers and managers, especially bridge asset managers. Although advanced remote technologies such as Terrestrial Laser Scanning (TLS) are recently established to overcome these challenges, the research on this subject is still lacking a comprehensive methodology for a reliable TLS-based bridge inspection and a well-detailed Bridge Information Model (BrIM) development. In this regard, the application of BrIM as a shared platform including a geometrical 3D CAD model connected to non-geometrical data can benefit asset managers, and significantly improve bridge management systems. Therefore, this research aims not only to provide a practical methodology for TLS-derived BrIM but also to serve a novel sliced-based approach for bridge geometric Computer-Aided Design (CAD) model extraction. This methodology was further verified and demonstrated via a case study on a cable-stayed bridge called Werrington Bridge, located in New South Wales (NSW), Australia. In this case, the process of extracting a precise 3D CAD model from TLS data using the sliced-based method and a workflow to connect non-geomet-rical information and develop a BrIM are elaborated. The findings of this research confirm the reliability of using TLS and the sliced-based method, as approaches with millimeter-level geometric accuracy, for bridge inspection subjected to precise 3D model extraction, as well as bridge asset management and BrIM development

Innovative Methods and Materials in Structural Health Monitoring of Civil Infrastructures

In the past, when elements in sructures were composed of perishable materials, such as wood, the maintenance of houses, bridges, etc., was considered of vital importance for their safe use and to preserve their efficiency. With the advent of materials such as reinforced concrete and steel, given their relatively long useful life, periodic and constant maintenance has often been considered a secondary concern. When it was realized that even for structures fabricated with these materials that the useful life has an end and that it was being approached, planning maintenance became an important and non-negligible aspect. Thus, the concept of structural health monitoring (SHM) was introduced, designed, and implemented as a multidisciplinary method. Computational mechanics, static and dynamic analysis of structures, electronics, sensors, and, recently, the Internet of Things (IoT) and artificial intelligence (AI) are required, but it is also important to consider new materials, especially those with intrinsic self-diagnosis characteristics, and to use measurement and survey methods typical of modern geomatics, such as satellite surveys and highly sophisticated laser tools

Numerical modelling of additive manufacturing process for stainless steel tension testing samples

Nowadays additive manufacturing (AM) technologies including 3D printing grow rapidly and they are expected to replace conventional subtractive manufacturing technologies to some extents. During a selective laser melting (SLM) process as one of popular AM technologies for metals, large amount of heats is required to melt metal powders, and this leads to distortions and/or shrinkages of additively manufactured parts. It is useful to predict the 3D printed parts to control unwanted distortions and shrinkages before their 3D printing. This study develops a two-phase numerical modelling and simulation process of AM process for 17-4PH stainless steel and it considers the importance of post-processing and the need for calibration to achieve a high-quality printing at the end. By using this proposed AM modelling and simulation process, optimal process parameters, material properties, and topology can be obtained to ensure a part 3D printed successfully