16,000 research outputs found
Recommended from our members
Automated Additive Construction (AAC) for Earth and Space Using In-situ Resources
Using Automated Additive Construction (AAC), low-fidelity large-scale compressive structures can be produced out of a wide variety of materials found in the environment. Compressionintensive structures need not utilize materials that have tight specifications for internal force management, meaning that the production of the building materials do not require costly methods for their preparation. Where a certain degree of surface roughness can be tolerated, lower-fidelity numerical control of deposited materials can provide a low-cost means for automating building processes, which can be utilized in remote or extreme environments on Earth or in Space. For space missions where every kilogram of mass must be lifted out of Earth’s gravity well, the promise of using in-situ materials for the construction of outposts, facilities, and installations could prove to be enabling if significant reduction of payload mass can be achieved. In a 2015 workshop sponsored by the Keck nstitute for Space Studies, on the topic of Three Dimensional (3D) Additive Construction For Space Using In-situ Resources, was conducted with additive construction experts from around the globe in attendance. The workshop explored disparate efforts, methods, and technologies and established a proposed framework for the field of Additive Construction Using In-situ Resources.
This paper defines the field of Automated Additive Construction Using In-situ Resources, describes the state-of-the-art for various methods, establishes a vision for future efforts, identifies gaps in current technologies, explores investment opportunities, and proposes potential technology demonstration missions for terrestrial, International Space Station (ISS), lunar, deep space zero-gravity, and Mars environments
Space station automation study. Automation requirements derived from space manufacturing concepts. Volume 1: Executive summary
The two manufacturing concepts developed represent innovative, technologically advanced manufacturing schemes. The concepts were selected to facilitate an in depth analysis of manufacturing automation requirements in the form of process mechanization, teleoperation and robotics, and artificial intelligence. While the cost effectiveness of these facilities has not been analyzed as part of this study, both appear entirely feasible for the year 2000 timeframe. The growing demand for high quality gallium arsenide microelectronics may warrant the ventures
Human-Robot Collaboration as a new paradigm in circular economy for WEEE management
E-waste is a priority waste stream as identified by the European Commission due to fast technological changes and eagerness of consumers to acquire new products. The value chain of the Waste on Electric and Electronic Equipment (WEEE) has to face several challenges: the EU directives requesting collection targets for 2019–2022, the costs of disassembly processes which is highly dependent on the applied technology and type of discarded device, and the sale of the obtained components and/or raw materials, with market prices varying according to uncontrolled variables at world level. This paper presents a human-robot collaboration for a recycling process where tasks are opportunistically assigned to either a human-being or a robot depending on the condition of the discarded electronic device. This solution presents some important advantages; i.e. tedious and dangerous tasks are assigned to robots whereas more value-added tasks are allocated to humans, thus preserving jobs and increasing job satisfaction. Furthermore, first results from a prototype show greater productivity and profitable projected investment
Space station automation study: Automation requirements derived from space manufacturing concepts. Volume 1: Executive summary
The electroepitaxial process and the Very Large Scale Integration (VLSI) circuits (chips) facilities were chosen because each requires a very high degree of automation, and therefore involved extensive use of teleoperators, robotics, process mechanization, and artificial intelligence. Both cover a raw materials process and a sophisticated multi-step process and are therfore highly representative of the kinds of difficult operation, maintenance, and repair challenges which can be expected for any type of space manufacturing facility. Generic areas were identified which will require significant further study. The initial design will be based on terrestrial state-of-the-art hard automation. One hundred candidate missions were evaluated on the basis of automation portential and availability of meaning ful knowldege. The design requirements and unconstrained design concepts developed for the two missions are presented
Proceedings of the 2nd Annual Conference on NASA/University Advanced Space Design Program
Topics discussed include: lunar transportation system, Mars rover, lunar fiberglass production, geosynchronous space stations, regenerative system for growing plants, lunar mining devices, lunar oxygen transporation system, mobile remote manipulator system, Mars exploration, launch/landing facility for a lunar base, and multi-megawatt nuclear power system
Automated biowaste sampling system, solids subsystem operating model, part 2
The detail design and fabrication of the Solids Subsystem were implemented. The system's capacity for the collection, storage or sampling of feces and vomitus from six subjects was tested and verified
First Lunar Outpost support study
The First Lunar Outpost (FLO) is the first manned step in the accomplishment of the Space Exploration Initiative, the Vice President's directive to NASA on the 20th anniversary of the Apollo moon landing. FLO's broad objectives are the establishment of a permanent human presence on the moon, supporting the utilization of extraterrestrial resources in a long-term, sustained program. The primary objective is to emplace and validate the first elements of a man tended outpost on the lunar surface to provide the basis for: (1) establishing, maintaining and expanding human activities and influence across the surface; (2) establishing, maintaining and enhancing human safety and productivity; (3) accommodating space transportation operations to and from the surface; (4) accommodating production of scientific information; (5) exploiting in-situ resources. Secondary objectives are: (1) to conduct local, small scale science (including life science); (2) In-situ resource utilization (ISRU) demonstrations; (3) engineering and operations tests; (4) to characterize the local environment; and (5) to explore locally. The current work is part of ongoing research at the Sasakawa International Center for Space Architecture supporting NASA's First Lunar Outpost initiative. Research at SICSA supporting the First Lunar Outpost initiative has been funded through the Space Exploration Initiatives office at Johnson Space Center. The objectives of the current study are to further develop a module concept from an evaluation of volumetric and programmatic requirements, and pursue a high fidelity design of this concept, with the intention of providing a high fidelity design mockup to research planetary design issues and evaluate future design concepts
Mining nonterrestrial resources: Information needs and research topics
An outline of topics we need to understand better in order to apply mining technology to a nonterrestrial environment is presented. The proposed list is not intended to be complete. It aims to identify representative topics that suggest productive research. Such research will reduce the uncertainties associated with extrapolating from conventional earthbound practice to nonterrestrial applications. One objective is to propose projects that should put future discussions of nonterrestrial mining on a firmer, less speculative basis
JUNO Conceptual Design Report
The Jiangmen Underground Neutrino Observatory (JUNO) is proposed to determine
the neutrino mass hierarchy using an underground liquid scintillator detector.
It is located 53 km away from both Yangjiang and Taishan Nuclear Power Plants
in Guangdong, China. The experimental hall, spanning more than 50 meters, is
under a granite mountain of over 700 m overburden. Within six years of running,
the detection of reactor antineutrinos can resolve the neutrino mass hierarchy
at a confidence level of 3-4, and determine neutrino oscillation
parameters , , and to
an accuracy of better than 1%. The JUNO detector can be also used to study
terrestrial and extra-terrestrial neutrinos and new physics beyond the Standard
Model. The central detector contains 20,000 tons liquid scintillator with an
acrylic sphere of 35 m in diameter. 17,000 508-mm diameter PMTs with high
quantum efficiency provide 75% optical coverage. The current choice of
the liquid scintillator is: linear alkyl benzene (LAB) as the solvent, plus PPO
as the scintillation fluor and a wavelength-shifter (Bis-MSB). The number of
detected photoelectrons per MeV is larger than 1,100 and the energy resolution
is expected to be 3% at 1 MeV. The calibration system is designed to deploy
multiple sources to cover the entire energy range of reactor antineutrinos, and
to achieve a full-volume position coverage inside the detector. The veto system
is used for muon detection, muon induced background study and reduction. It
consists of a Water Cherenkov detector and a Top Tracker system. The readout
system, the detector control system and the offline system insure efficient and
stable data acquisition and processing.Comment: 328 pages, 211 figure
- …