Customisable arithmetic hardware designs

Imperial Users onl

Implementation of the advanced encryption standard algorithm on an FPGA for image processing through the universal asynchronous receiver-transmitter protocol

Communication among end users can be based either on wired or wireless technology. Cryptography plays a vital role in ensuring data exchange is secure among end users. Data can be encrypted and decrypted using symmetric or asymmetric key cryptographic techniques to provide confidentiality. In wireless technology, images are exchanged through low-cost wireless peripheral devices, such as radio frequency identification device (RFID), nRF, and ZigBee, that can interface with field programmable gate array (FPGA) among the end users. One of the issues is that data exchange through wireless devices does not offer confidentiality, and subsequently, data can be lost. In this paper, we propose a design and implementation of AES-128 cipher algorithm on an FPGA board for image processing through the universal asynchronous receiver transmitter (UART) protocol. In this process, the advanced encryption standard (AES) algorithm is used to encrypt and decrypt the image, while the transmitter and receiver designs are implemented on two Xilinx BASYS-3 circuits connected with a ZigBee RF module. The encrypted image uses less memory, such as LUTs (141), and also consumes less chip power (0.0291 w), I/O (0.003), block RAM (0.001 w), data, and logic to provide much higher efficiency than wired communication technology. We also observe that images can be exchanged through the UART protocol with different baud rates in run time

Integrated Power, Avionics, and Software (iPAS) Space Telecommunications Radio System (STRS) Radio User's Guide -- Advanced Exploration Systems (AES)

The Integrated Power, Avionics and Software (IPAS) software defined radio (SDR) was implemented on the Reconfigurable, Intelligently-Adaptive Communication System (RAICS) platform, for radio development at NASA Johnson Space Center. Software and hardware description language (HDL) code were delivered by NASA Glenn Research Center for use in the IPAS test bed and for development of their own Space Telecommunications Radio System (STRS) waveforms on the RAICS platform. The purpose of this document is to describe how to setup and operate the IPAS STRS Radio platform with its delivered test waveform

FPGA-based module for SURF extraction

We present a complete hardware and software solution of an FPGA-based computer vision embedded module capable of carrying out SURF image features extraction algorithm. Aside from image analysis, the module embeds a Linux distribution that allows to run programs specifically tailored for particular applications. The module is based on a Virtex-5 FXT FPGA which features powerful configurable logic and an embedded PowerPC processor. We describe the module hardware as well as the custom FPGA image processing cores that implement the algorithm's most computationally expensive process, the interest point detection. The module's overall performance is evaluated and compared to CPU and GPU based solutions. Results show that the embedded module achieves comparable disctinctiveness to the SURF software implementation running in a standard CPU while being faster and consuming significantly less power and space. Thus, it allows to use the SURF algorithm in applications with power and spatial constraints, such as autonomous navigation of small mobile robots

Performance and area evaluations of processor-based benchmarks on FPGA devices

The computing system on SoCs is being long-term research since the FPGA technology has emerged due to its personality of re-programmable fabric, reconfigurable computing, and fast development time to market. During the last decade, uni-processor in a SoC is no longer to deal with the high growing market for complex applications such as Mobile Phones audio and video encoding, image and network processing. Due to the number of transistors on a silicon wafer is increasing, the recent FPGAs or embedded systems are advancing toward multi-processor-based design to meet tremendous performance and benefit this kind of systems are possible. Therefore, is an upcoming age of the MPSoC. In addition, most of the embedded processors are soft-cores, because they are flexible and reconfigurable for specific software functions and easy to build homogenous multi-processor systems for parallel programming. Moreover, behavioural synthesis tools are becoming a lot more powerful and enable to create datapath of logic units from high-level algorithms such as C to HDL and available for partitioning a HW/SW concurrent methodology. A range of embedded processors is able to implement on a FPGA-based prototyping to integrate the CPUs on a programmable device. This research is, firstly represent different types of computer architectures in modern embedded processors that are followed in different type of software applications (eg. Multi-threading Operations or Complex Functions) on FPGA-based SoCs; and secondly investigate their capability by executing a wide-range of multimedia software codes (Integer-algometric only) in different models of the processor-systems (uni-processor or multi-processor or Co-design), and finally compare those results in terms of the benchmarks and resource utilizations within FPGAs. All the examined programs were written in standard C and executed in a variety numbers of soft-core processors or hardware units to obtain the execution times. However, the number of processors and their customizable configuration or hardware datapath being generated are limited by a target FPGA resource, and designers need to understand the FPGA-based tradeoffs that have been considered - Speed versus Area. For this experimental purpose, I defined benchmarks into DLP / HLS catalogues, which are "data" and "function" intensive respectively. The programs of DLP will be executed in LEON3 MP and LE1 CMP multi-processor systems and the programs of HLS in the LegUp Co-design system on target FPGAs. In preliminary, the performance of the soft-core processors will be examined by executing all the benchmarks. The whole story of this thesis work centres on the issue of the execute times or the speed-up and area breakdown on FPGA devices in terms of different programs

Implementation and Benchmarking of a Crypto Processor for a NB-IoT SoC Platform

The goal of this Master’s Thesis is to investigate the implementation of cryptographic algorithms for IoT and how these encryption systems can be integrated in a NarrowBand IoT platform. Following 3rd Generation Partnership Project (3GPP) specifications, the Evolved Packet System (EPS) Encryption Algorithms (EEA) and EPS Integrity Algorithms (EIA) have been implemented and tested. The latter are based on three different ciphering algorithms, used as keystream generators: Advanced Encryption Standard (AES), SNOW 3G and ZUC. These algorithms are used in Long Term Evolution (LTE) terminals to perform user data confidentiality and integrity protection. In the first place, a thorough study of the algorithms has been conducted. Then, we have used Matlab to generate a reference model of the algorithms and the High-Level Synthesis (HLS) design flow to generate the Register-Transfer Level (RTL) description from algorithmic descriptions in C++. The keystream generation and integrity blocks have been tested at RTL level. The confidentiality block has been described along with the control, datapath and interface block at a RTL level using System C language. The hardware blocks have been integrated into a processor capable of performing hardware confidentiality and integrity protection: the crypto processor. This Intellectual Property (IP) has been integrated and tested in a cycle accurate virtual platform. The outcome of this Master’s Thesis is a crypto processor capable of performing the proposed confidentiality and integrity algorithms under request.The Internet of Things (IoT) is one of the big revolutions that our society is expected to go through in the near future. This represents the inter-connection of devices, sensors, controllers, and any items, refereed as things, through a network that enables machine-to-machine communication. The number of connected devices will greatly increase. The applications taking advantage of IoT will enable to develop a great amount of technologies such as smart homes, smart cities and intelligent transportation. The possibilities allowed are huge and not yet fully explored. Picture yourself in the near future having a nice dinner with some friends. Then, you suddenly recall that your parking ticket expires in five minutes and unfortunately your car is parked some blocks away. You are having a good time and feel lazy to walk all the way to where you parked your car to pay for a time extension. Luckily enough, the parking meter is part of the IoT network and allows you, with the recently installed new application in your smart-phone, to pay this bill from anywhere you are. This payment will be sent to the parking meter and your time will be extended. Problem solved, right? Well, the risk comes when you perform your payment, not knowing that your "worst enemy" has interceded this communication and is able to alter your transaction. Perhaps, this individual decides to cancel your payment and you will have to pay a fine. Or even worse, this person steals your banking details and uses your money to take the vacations you’ve always wanted. There are many examples in our everyday life where we expose our personal information. With an increasing number of devices existing and using wireless communications without the action of an human, the security is a key aspect of IoT. This Master’s Thesis addresses the need to cover these security breaches in a world where an increasing amount of devices are communicating with each other. With the expansion of IoT where billions of devices will be connected wirelessly, our data will be widely spread over the air. The user will not be able to protect their sensible data without these securing capabilities. Therefore, different security algorithms used in today’s and tomorrow’s wireless technologies have been implemented on a chip to secure the communication. The confidentiality and integrity algorithms aim to solve the two aspects of the problem: protect the secrecy of banking details and prevent the alteration of the communication’s information. In this Master’s Thesis we have developed a hardware processor for securing data during a wireless communication, specifically designed for IoT applications. The developed system is realized with minimal area and power in mind, so that they can be fitted even in the smallest devices. We have compared many different hardware architectures, and after exploring many possible implementations, we have implemented the security algorithms on a hardware platform. We believe the content of this Thesis work is of great interest to anybody interested in hardware security applied to the IoT field. Furthermore, due to the processes and methodology used in this work, it will also be of interest to people who want to know more about how higher level programming languages can be used to describe such a specialized circuit, like one performing security algorithms. Finally, people interested in hardware and software co-simulation will find in this project a good example of the utilization of such system modeling technique

Deep Space Network information system architecture study

The purpose of this article is to describe an architecture for the Deep Space Network (DSN) information system in the years 2000-2010 and to provide guidelines for its evolution during the 1990s. The study scope is defined to be from the front-end areas at the antennas to the end users (spacecraft teams, principal investigators, archival storage systems, and non-NASA partners). The architectural vision provides guidance for major DSN implementation efforts during the next decade. A strong motivation for the study is an expected dramatic improvement in information-systems technologies, such as the following: computer processing, automation technology (including knowledge-based systems), networking and data transport, software and hardware engineering, and human-interface technology. The proposed Ground Information System has the following major features: unified architecture from the front-end area to the end user; open-systems standards to achieve interoperability; DSN production of level 0 data; delivery of level 0 data from the Deep Space Communications Complex, if desired; dedicated telemetry processors for each receiver; security against unauthorized access and errors; and highly automated monitor and control

Trusted SoC Realization for Remote Dynamic IP Integration

Heutzutage bieten field-programmable gate arrays (FPGAs) enorme Rechenleistung und Flexibilität. Zudem sind sie oft auf einem einzigen Chip mit eingebetteten Multicore-Prozessoren, DSP-Engines und Speicher-Controllern integriert. Dadurch sind sie für große und komplexe Anwendungen geeignet. Gleichzeitig führten die Fortschritte auf dem Gebiet der High-Level-Synthese und die Verfügbarkeit standardisierter Schnittstellen (wie etwa das Advanced eXtensible Interface 4) zur Entwicklung spezialisierter und neuartiger Funktionalitäten durch Designhäuser. All dies schuf einen Bedarf für ein Outsourcing der Entwicklung oder die Lizenzierung von FPGA-IPs (Intellectual Property). Ein Pay-per-Use IP-Lizenzierungsmodell, bei dem diese IPs vor allen Marktteilnehmern geschützt sind, kommt den Entwicklern der IPs zugute. Außerdem handelt es sich bei den Entwicklern von FPGA-Systemen in der Regel um kleine bis mittlere Unternehmen, die in Bezug auf die Markteinführungszeit und die Kosten pro Einheit von einem solchen Lizenzierungsmodell profitieren können. Im akademischen Bereich und in der Industrie gibt es mehrere IP-Lizenzierungsmodelle und Schutzlösungen, die eingesetzt werden können, die jedoch mit zahlreichen Sicherheitsproblemen behaftet sind. In einigen Fällen verursachen die vorgeschlagenen Sicherheitsmaßnahmen einen unnötigen Ressourcenaufwand und Einschränkungen für die Systementwickler, d. h., sie können wesentliche Funktionen ihres Geräts nicht nutzen. Darüber hinaus lassen sie zwei funktionale Herausforderungen außer Acht: das Floorplanning der IP auf der programmierbaren Logik (PL) und die Generierung des Endprodukts der IP (Bitstream) unabhängig vom Gesamtdesign. In dieser Arbeit wird ein Pay-per-Use-Lizenzierungsschema vorgeschlagen und unter Verwendung eines security framework (SFW) realisiert, um all diese Herausforderungen anzugehen. Das vorgestellte Schema ist pragmatisch, weniger restriktiv für Systementwickler und bietet Sicherheit gegen IP-Diebstahl. Darüber hinaus werden Maßnahmen ergriffen, um das System vor einem IP zu schützen, das bösartige Schaltkreise enthält. Das „Secure Framework“ umfasst ein vertrauenswürdiges Betriebssystem, ein reichhaltiges Betriebssystem, mehrere unterstützende Komponenten (z. B. TrustZone- Logik, gegen Seitenkanalangriffe (SCA) resistente Entschlüsselungsschaltungen) und Softwarekomponenten, z. B. für die Bitstromanalyse. Ein Gerät, auf dem das SFW läuft, kann als vertrauenswürdiges Gerät betrachtet werden, das direkt mit einem Repository oder einem IP-Core-Entwickler kommunizieren kann, um IPs in verschlüsselter Form zu erwerben. Die Entschlüsselung und Authentifizierung des IPs erfolgt auf dem Gerät, was die Angriffsfläche verringert und es weniger anfällig für IP-Diebstahl macht. Außerdem werden Klartext-IPs in einem geschützten Speicher des vertrauenswürdigen Betriebssystems abgelegt. Das Klartext-IP wird dann analysiert und nur dann auf der programmierbaren Logik konfiguriert, wenn es authentisch ist und keine bösartigen Schaltungen enthält. Die Bitstrom-Analysefunktionalität und die SFW-Unterkomponenten ermöglichen die Partitionierung der PL-Ressourcen in sichere und unsichere Ressourcen, d. h. die Erweiterung desKonzepts der vertrauenswürdigen Ausführungsumgebung (TEE) auf die PL. Dies ist die erste Arbeit, die das TEE-Konzept auf die programmierbare Logik ausweitet. Bei der oben erwähnten SCA-resistenten Entschlüsselungsschaltung handelt es sich um die Implementierung des Advanced Encryption Standard, der so modifiziert wurde, dass er gegen elektromagnetische und stromverbrauchsbedingte Leckagen resistent ist. Das geschützte Design verfügt über zwei Gegenmaßnahmen, wobei die erste auf einer Vielzahl unterschiedler Implementierungsvarianten und veränderlichen Zielpositionen bei der Konfiguration basiert, während die zweite nur unterschiedliche Implementierungsvarianten verwendet. Diese Gegenmaßnahmen sind auch während der Laufzeit skalierbar. Bei der Bewertung werden auch die Auswirkungen der Skalierbarkeit auf den Flächenbedarf und die Sicherheitsstärke berücksichtigt. Darüber hinaus wird die zuvor erwähnte funktionale Herausforderung des IP Floorplanning durch den Vorschlag eines feinkörnigen Automatic Floorplanners angegangen, der auf gemischt-ganzzahliger linearer Programmierung basiert und aktuelle FPGAGenerationen mit größeren und komplexen Bausteine unterstützt. Der Floorplanner bildet eine Reihe von IPs auf dem FPGA ab, indem er präzise rekonfigurierbare Regionen schafft. Dadurch werden die verbleibenden verfügbaren Ressourcen für das Gesamtdesign maximiert. Die zweite funktionale Herausforderung besteht darin, dass die vorhandenen Tools keine native Funktionalität zur Erzeugung von IPs in einer eigenständigen Umgebung bieten. Diese Herausforderung wird durch den Vorschlag eines unabhängigen IP-Generierungsansatzes angegangen. Dieser Ansatz kann von den Marktteilnehmern verwendet werden, um IPs eines Entwurfs unabhängig vom Gesamtentwurf zu generieren, ohne die Kompatibilität der IPs mit dem Gesamtentwurf zu beeinträchtigen