1,050 research outputs found
Fault Testing for Reversible Circuits
Applications of reversible circuits can be found in the fields of low-power
computation, cryptography, communications, digital signal processing, and the
emerging field of quantum computation. Furthermore, prototype circuits for
low-power applications are already being fabricated in CMOS. Regardless of the
eventual technology adopted, testing is sure to be an important component in
any robust implementation.
We consider the test set generation problem. Reversibility affects the
testing problem in fundamental ways, making it significantly simpler than for
the irreversible case. For example, we show that any test set that detects all
single stuck-at faults in a reversible circuit also detects all multiple
stuck-at faults. We present efficient test set constructions for the standard
stuck-at fault model as well as the usually intractable cell-fault model. We
also give a practical test set generation algorithm, based on an integer linear
programming formulation, that yields test sets approximately half the size of
those produced by conventional ATPG.Comment: 30 pages, 8 figures. to appear in IEEE Trans. on CA
On applying the set covering model to reseeding
The Functional BIST approach is a rather new BIST technique based on exploiting embedded system functionality to generate deterministic test patterns during BIST. The approach takes advantages of two well-known testing techniques, the arithmetic BIST approach and the reseeding method. The main contribution of the present paper consists in formulating the problem of an optimal reseeding computation as an instance of the set covering problem. The proposed approach guarantees high flexibility, is applicable to different functional modules, and, in general, provides a more efficient test set encoding then previous techniques. In addition, the approach shorts the computation time and allows to better exploiting the tradeoff between area overhead and global test length as well as to deal with larger circuits
Synthesis and Optimization of Reversible Circuits - A Survey
Reversible logic circuits have been historically motivated by theoretical
research in low-power electronics as well as practical improvement of
bit-manipulation transforms in cryptography and computer graphics. Recently,
reversible circuits have attracted interest as components of quantum
algorithms, as well as in photonic and nano-computing technologies where some
switching devices offer no signal gain. Research in generating reversible logic
distinguishes between circuit synthesis, post-synthesis optimization, and
technology mapping. In this survey, we review algorithmic paradigms ---
search-based, cycle-based, transformation-based, and BDD-based --- as well as
specific algorithms for reversible synthesis, both exact and heuristic. We
conclude the survey by outlining key open challenges in synthesis of reversible
and quantum logic, as well as most common misconceptions.Comment: 34 pages, 15 figures, 2 table
What is the Path to Fast Fault Simulation?
Motivated by the recent advances in fast fault simulation techniques for large combinational circuits, a panel discussion has been organized for the 1988 International Test Conference. This paper is a collective account of the position statements offered by the panelists
Recommended from our members
Silicon compilation
Silicon compilation is a term used for many different purposes. In this paper we define silicon compilation as a mapping from some higher level description into layout. We define the basic issues in structural and behavioral silicon compilation and some possible solutions to those issues. Finally, we define the concept of an intelligent silicon compiler in which the compiler evaluates the quality of the generated design and attempts to improve it if it is not satisfactory
Algorithms for Power Aware Testing of Nanometer Digital ICs
At-speed testing of deep-submicron digital very large scale integrated (VLSI) circuits
has become mandatory to catch small delay defects. Now, due to continuous shrinking
of complementary metal oxide semiconductor (CMOS) transistor feature size, power
density grows geometrically with technology scaling. Additionally, power dissipation
inside a digital circuit during the testing phase (for test vectors under all fault models
(Potluri, 2015)) is several times higher than its power dissipation during the normal
functional phase of operation. Due to this, the currents that flow in the power grid during
the testing phase, are much higher than what the power grid is designed for (the
functional phase of operation). As a result, during at-speed testing, the supply grid
experiences unacceptable supply IR-drop, ultimately leading to delay failures during
at-speed testing. Since these failures are specific to testing and do not occur during
functional phase of operation of the chip, these failures are usually referred to false
failures, and they reduce the yield of the chip, which is undesirable.
In nanometer regime, process parameter variations has become a major problem.
Due to the variation in signalling delays caused by these variations, it is important to
perform at-speed testing even for stuck faults, to reduce the test escapes (McCluskey
and Tseng, 2000; Vorisek et al., 2004). In this context, the problem of excessive peak
power dissipation causing false failures, that was addressed previously in the context of
at-speed transition fault testing (Saxena et al., 2003; Devanathan et al., 2007a,b,c), also
becomes prominent in the context of at-speed testing of stuck faults (Maxwell et al.,
1996; McCluskey and Tseng, 2000; Vorisek et al., 2004; Prabhu and Abraham, 2012;
Potluri, 2015; Potluri et al., 2015). It is well known that excessive supply IR-drop during
at-speed testing can be kept under control by minimizing switching activity during
testing (Saxena et al., 2003). There is a rich collection of techniques proposed in the past
for reduction of peak switching activity during at-speed testing of transition/delay faults
ii
in both combinational and sequential circuits. As far as at-speed testing of stuck faults
are concerned, while there were some techniques proposed in the past for combinational
circuits (Girard et al., 1998; Dabholkar et al., 1998), there are no techniques concerning
the same for sequential circuits. This thesis addresses this open problem. We
propose algorithms for minimization of peak switching activity during at-speed testing
of stuck faults in sequential digital circuits under the combinational state preservation
scan (CSP-scan) architecture (Potluri, 2015; Potluri et al., 2015). First, we show that,
under this CSP-scan architecture, when the test set is completely specified, the peak
switching activity during testing can be minimized by solving the Bottleneck Traveling
Salesman Problem (BTSP). This mapping of peak test switching activity minimization
problem to BTSP is novel, and proposed for the first time in the literature.
Usually, as circuit size increases, the percentage of don’t cares in the test set increases.
As a result, test vector ordering for any arbitrary filling of don’t care bits
is insufficient for producing effective reduction in switching activity during testing of
large circuits. Since don’t cares dominate the test sets for larger circuits, don’t care
filling plays a crucial role in reducing switching activity during testing. Taking this
into consideration, we propose an algorithm, XStat, which is capable of performing test
vector ordering while preserving don’t care bits in the test vectors, following which, the
don’t cares are filled in an intelligent fashion for minimizing input switching activity,
which effectively minimizes switching activity inside the circuit (Girard et al., 1998).
Through empirical validation on benchmark circuits, we show that XStat minimizes
peak switching activity significantly, during testing.
Although XStat is a very powerful heuristic for minimizing peak input-switchingactivity,
it will not guarantee optimality. To address this issue, we propose an algorithm
that uses Dynamic Programming to calculate the lower bound for a given sequence
of test vectors, and subsequently uses a greedy strategy for filling don’t cares in this
sequence to achieve this lower bound, thereby guaranteeing optimality. This algorithm,
which we refer to as DP-fill in this thesis, provides the globally optimal solution for
minimizing peak input-switching-activity and also is the best known in the literature
for minimizing peak input-switching-activity during testing. The proof of optimality of
DP-fill in minimizing peak input-switching-activity is also provided in this thesis
Soft Computing Approach To Automatic Test Pattern Generation For Sequential Vlsi Circuit
Due to the constant development in the integrated circuits, the automatic test pattern generation problem become more vital for sequential vlsi circuits in these days. Also testing of integrating circuits and systems has become a difficult problem. In this paper we have discussed the problem of the automatic test sequence generation using particle swarm optimization(PSO) and technique for structure optimization of a deterministic test pattern generator using genetic algorithm(GA)
Test Vector Decomposition Based Static Compaction Algorithms for Combinational Circuits
Testing system-on-chips involves applying huge amounts of test data, which is stored in the tester memory and then transferred to the chip under test during test application. Therefore, practical techniques, such as test compression and compaction, are required to reduce the amount of test data in order to reduce both the total testing time and memory requirements for the tester. In this paper, a new approach to static compaction for combinational circuits, referred to as test vector decomposition (TVD), is proposed. In addition, two new TVD based static compaction algorithms are presented. Experimental results for benchmark circuits demonstrate the effectiveness of the two new static compaction algorithms
- …