6,692 research outputs found
Test exploration and validation using transaction level models
The complexity of the test infrastructure and test strategies in systems-on-chip approaches the complexity of the functional design space. This paper presents test design space exploration and validation of test strategies and schedules using transaction level models (TLMs). Since many aspects of testing involve the transfer of a significant amount of test stimuli and responses, the communication-centric view of TLMs suits this purpose exceptionally wel
Optimizing Test Pattern Generation Using Top-Off ATPG Methodology for Stuck–AT, Transition and Small Delay Defect Faults
The ever increasing complexity and size of digital circuits complemented by Deep Sub Micron (DSM) technology trends today pose challenges to the efficient Design For Test (DFT) methodologies. Innovation is required not only in designing the digital circuits, but also in automatic test pattern generation (ATPG) to ensure that the pattern set screens all the targeted faults while still complying with the Automatic Test Equipment (ATE) memory constraints.
DSM technology trends push the requirements of ATPG to not only include the conventional static defects but also to include test patterns for dynamic defects. The current industry practices consider test pattern generation for transition faults to screen dynamic defects. It has been observed that just screening for transition faults alone is not sufficient in light of the continuing DSM technology trends. Shrinking technology nodes have pushed DFT engineers to include Small Delay Defect (SDD) test patterns in the production flow. The current industry standard ATPG tools are evolving and SDD ATPG is not the most economical option in terms of both test generation CPU time and pattern volume. New techniques must be explored in order to ensure that a quality test pattern set can be generated which includes patterns for stuck-at, transition and SDD faults, all the while ensuring that the pattern volume remains economical.
This thesis explores the use of a “Top-Off” ATPG methodology to generate an optimal test pattern set which can effectively screen the required fault models while containing the pattern volume within a reasonable limit
REDUCING POWER DURING MANUFACTURING TEST USING DIFFERENT ARCHITECTURES
Power during manufacturing test can be several times higher than power consumption in functional mode. Excessive power during test can cause IR drop, over-heating, and early aging of the chips. In this dissertation, three different architectures have been introduced to reduce test power in general cases as well as in certain scenarios, including field test.
In the first architecture, scan chains are divided into several segments. Every segment needs a control bit to enable capture in a segment when new faults are detectable on that segment for that pattern. Otherwise, the segment should be disabled to reduce capture power. We group the control bits together into one or more control chains.
To address the extra pin(s) required to shift data into the control chain(s) and significant post processing in the first architecture, we explored a second architecture. The second architecture stitches the control bits into the chains they control as EECBs (embedded enable capture bits) in between the segments. This allows an ATPG software tool to automatically generate the appropriate EECB values for each pattern to maintain the fault coverage. This also works in the presence of an on-chip decompressor.
The last architecture focuses primarily on the self-test of a device in a 3D stacked IC when an existing FPGA in the stack can be programmed as a tester. We show that the energy expended during test is significantly less than would be required using low power patterns fed by an on-chip decompressor for the same very short scan chains
Recommended from our members
Testability considerations for implementing an embedded memory subsystem
textThere are a number of testability considerations for VLSI design,
but test coverage, test time, accuracy of test patterns and
correctness of design information for DFD (Design for debug) are
the most important ones in design with embedded memories. The goal
of DFT (Design-for-Test) is to achieve zero defects. When it comes
to the memory subsystem in SOCs (system on chips), many flavors of
memory BIST (built-in self test) are able to get high test
coverage in a memory, but often, no proper attention is given to
the memory interface logic (shadow logic). Functional testing and
BIST are the most prevalent tests for this logic, but functional
testing is impractical for complicated SOC designs. As a result,
industry has widely used at-speed scan testing to detect delay
induced defects. Compared with functional testing, scan-based
testing for delay faults reduces overall pattern generation
complexity and cost by enhancing both controllability and
observability of flip-flops. However, without proper modeling of
memory, Xs are generated from memories. Also, when the design has
chip compression logic, the number of ATPG patterns is increased
significantly due to Xs from memories. In this dissertation, a
register based testing method and X prevention logic are presented
to tackle these problems.
An important design stage for scan based testing with memory
subsystems is the step to create a gate level model and verify
with this model. The flow needs to provide a robust ATPG netlist
model. Most industry standard CAD tools used to analyze fault
coverage and generate test vectors require gate level models.
However, custom embedded memories are typically designed using a
transistor-level flow, there is a need for an abstraction step to
generate the gate models, which must be equivalent to the actual
design (transistor level). The contribution of the research is a
framework to verify that the gate level representation of custom
designs is equivalent to the transistor-level design.
Compared to basic stuck-at fault testing, the number of patterns
for at-speed testing is much larger than for basic stuck-at fault
testing. So reducing test and data volume are important. In this
desertion, a new scan reordering method is introduced to reduce
test data with an optimal routing solution. With in depth
understanding of embedded memories and flows developed during the
study of custom memory DFT, a custom embedded memory Bit Mapping
method using a symbolic simulator is presented in the last chapter
to achieve high yield for memories.Electrical and Computer Engineerin
Recommended from our members
Testing for delay defects utilizing test data compression techniques
textAs technology shrinks new types of defects are being discovered and new fault models are being created for those defects. Transition delay and path delay fault models are two such models that have been created, but they still fall short in that they are unable to obtain a high test coverage of smaller delay defects; these defects can cause functional behavior to fail and also indicate potential reliability issues. The first part of this dissertation addresses these problems by presenting an enhanced timing-based delay fault testing technique that incorporates the use of standard delay ATPG, along with timing information gathered from standard static timing analysis. Utilizing delay fault patterns typically increases the test data volume by 3-5X when compared to stuck-at patterns. Combined with the increase in test data volume associated with the increase in gate count that typically accompanies the miniaturization of technology, this adds up to a very large increase in test data volume that directly affect test time and thus the manufacturing cost. The second part of this dissertation presents a technique for improving test compression and reducing test data volume by using multiple expansion ratios while determining the configuration of the scan chains for each of the expansion ratios using a dependency analysis procedure that accounts for structural dependencies as well as free variable dependencies to improve the probability of detecting faults. Finally, this dissertation addresses the problem of unknown values (X’s) in the output response data corrupting the data and degrading the performance of the output response compactor and thus the overall amount of test compression. Four techniques are presented that focus on handling response data with large percentages of X’s. The first uses X-canceling MISR architecture that is based on deterministically observing scan cells, and the second is a hybrid approach that combines a simple X-masking scheme with the X-canceling MISR for further gains in test compression. The third and fourth techniques revolve around reiterative LFSR X-masking, which take advantage of LFSR-encoded masks that can be reused for multiple scan slices in novel ways.Electrical and Computer Engineerin
- …