A machine learning-based approach to optimize repair and increase yield of embedded flash memories in automotive systems-on-chip

Nowadays, Embedded Flash Memory cores occupy a significant portion of Automotive Systems-on-Chip area, therefore strongly contributing to the final yield of the devices. Redundancy strategies play a key role in this context; in case of memory failures, a set of spare word- and bit-lines are allocated by a replacement algorithm that complements the memory testing procedure. In this work, we show that replacement algorithms, which are heavily constrained in terms of execution time, may be slightly inaccurate and lead to classify a repairable memory core as unrepairable. We denote this situation as Flash memory false fail. The proposed approach aims at identifying false fails by using a Machine Learning approach that exploits a feature extraction strategy based on shape recognition. Experimental results carried out on the manufacturing data show a high capability of predicting false fails

Optimizing Scrubbing by Netlist Analysis for FPGA Configuration Bit Classification and Floorplanning

Existing scrubbing techniques for SEU mitigation on FPGAs do not guarantee an error-free operation after SEU recovering if the affected configuration bits do belong to feedback loops of the implemented circuits. In this paper, we a) provide a netlist-based circuit analysis technique to distinguish so-called critical configuration bits from essential bits in order to identify configuration bits which will need also state-restoring actions after a recovered SEU and which not. Furthermore, b) an alternative classification approach using fault injection is developed in order to compare both classification techniques. Moreover, c) we will propose a floorplanning approach for reducing the effective number of scrubbed frames and d), experimental results will give evidence that our optimization methodology not only allows to detect errors earlier but also to minimize the Mean-Time-To-Repair (MTTR) of a circuit considerably. In particular, we show that by using our approach, the MTTR for datapath-intensive circuits can be reduced by up to 48.5% in comparison to standard approaches

Survey of Soft Error Mitigation Techniques Applied to LEON3 Soft Processors on SRAM-Based FPGAs

Soft-core processors implemented in SRAM-based FPGAs are an attractive option for applications to be employed in radiation environments due to their flexibility, relatively-low application development costs, and reconfigurability features enabling them to adapt to the evolving mission needs. Despite the advantages soft-core processors possess, they are seldom used in critical applications because they are more sensitive to radiation than their hard-core counterparts. For instance, both the logic and signal routing circuitry of a soft-core processor as well as its user memory are susceptible to radiation-induced faults. Therefore, soft-core processors must be appropriately hardened against ionizing-radiation to become a feasible design choice for harsh environments and thus to reap all their benefits. This survey henceforth discusses various techniques to protect the configuration and user memories of an LEON3 soft processor, which is one of the most widely used soft-core processors in radiation environments, as reported in the state-of-the-art literature, with the objective of facilitating the choice of right fault-mitigation solution for any given soft-core processor

Hardware Security Implications of Reliability, Remanence and Recovery in Embedded Memory

Secure semiconductor devices usually destroy key material on tamper detection. However, data remanence effect in SRAM and Flash/EEPROM makes secure erasure process more challenging. On the other hand, data integrity of the embedded memory is essential to mitigate fault attacks and Trojan malware. Data retention issues could influence the reliability of embedded systems. Some examples of such issues in industrial and automotive applications are presented. When it comes to the security of semiconductor devices, both data remanence and data retention issues could lead to possible data recovery by an attacker. This paper introduces a new power glitching technique that reduces the data remanence time in embedded SRAM from seconds to microseconds at almost no cost. This would definitely help in designing systems with better secret key guarding. Data remanence in non-volatile memory could be influenced in the same way. The effect of data remanence and data retention on hardware security is discussed and possible countermeasures are suggested. This should raise awareness among the designers of secure embedded systems

Physical Intelligent Sensors

This paper proposes the development of intelligent sensors as part of an integrated systems approach, i.e. one treats the sensors as a complete system with its own sensing hardware (the traditional sensor), A/D converters, processing and storage capabilities, software drivers, self-assessment algorithms, communication protocols and evolutionary methodologies that allow them to get better with time. Under a project being undertaken at the NASA s Stennis Space Center, an integrated framework is being developed for the intelligent monitoring of smart elements. These smart elements can be sensors, actuators or other devices. The immediate application is the monitoring of the rocket test stands, but the technology should be generally applicable to the Integrated Systems Health Monitoring (ISHM) vision. This paper outlines progress made in the development of intelligent sensors by describing the work done till date on Physical Intelligent Sensors (PIS). The PIS discussed here consists of a thermocouple used to read temperature in an analog form which is then converted into digital values. A microprocessor collects the sensor readings and runs numerous embedded event detection routines on the collected data and if any event is detected, it is reported, stored and sent to a remote system through an Ethernet connection. Hence the output of the PIS is data coupled with confidence factor in the reliability of the data which leads to information on the health of the sensor at all times. All protocols are consistent with IEEE 1451.X standards. This work lays the foundation for the next generation of smart devices that have embedded intelligence for distributed decision making capabilities

Theory and practice of flash memory mobile forensics

This paper is an introduction to flash memory forensics with a special focus on completeness of evidence acquired from mobile phones. Moving through academic papers and industrial documents will be introduced the particular nature of non-volatile memories present in nowadays mobile phones; how they really work and which challenges they pose to forensic investigators. Then will be presented an advanced test in which some brand new flash memories have been used to hide data in man-made bad blocks: the aim is to verify if forensic software tools are able to acquire data from such blocks, and to evaluate the possibility to hide data at analysts’ eyes

Design Solutions For Modular Satellite Architectures

The cost-effective access to space envisaged by ESA would open a wide range of new opportunities and markets, but is still many years ahead. There is still a lack of devices, circuits, systems which make possible to develop satellites, ground stations and related services at costs compatible with the budget of academic institutions and small and medium enterprises (SMEs). As soon as the development time and cost of small satellites will fall below a certain threshold (e.g. 100,000 to 500,000 €), appropriate business models will likely develop to ensure a cost-effective and pervasive access to space, and related infrastructures and services. These considerations spurred the activity described in this paper, which is aimed at: - proving the feasibility of low-cost satellites using COTS (Commercial Off The Shelf) devices. This is a new trend in the space industry, which is not yet fully exploited due to the belief that COTS devices are not reliable enough for this kind of applications; - developing a flight model of a flexible and reliable nano-satellite with less than 25,000€; - training students in the field of avionics space systems: the design here described is developed by a team including undergraduate students working towards their graduation work. The educational aspects include the development of specific new university courses; - developing expertise in the field of low-cost avionic systems, both internally (university staff) and externally (graduated students will bring their expertise in their future work activity); - gather and cluster expertise and resources available inside the university around a common high-tech project; - creating a working group composed of both University and SMEs devoted to the application of commercially available technology to space environment. The first step in this direction was the development of a small low cost nano-satellite, started in the year 2004: the name of this project was PiCPoT (Piccolo Cubo del Politecnico di Torino, Small Cube of Politecnico di Torino). The project was carried out by some departments of the Politecnico, in particular Electronics and Aerospace. The main goal of the project was to evaluate the feasibility of using COTS components in a space project in order to greatly reduce costs; the design exploited internal subsystems modularity to allow reuse and further cost reduction for future missions. Starting from the PiCPoT experience, in 2006 we began a new project called ARaMiS (Speretta et al., 2007) which is the Italian acronym for Modular Architecture for Satellites. This work describes how the architecture of the ARaMiS satellite has been obtained from the lesson learned from our former experience. Moreover we describe satellite operations, giving some details of the major subsystems. This work is composed of two parts. The first one describes the design methodology, solutions and techniques that we used to develop the PiCPoT satellite; it gives an overview of its operations, with some details of the major subsystems. Details on the specifications can also be found in (Del Corso et al., 2007; Passerone et al, 2008). The second part, indeed exploits the experience achieved during the PiCPoT development and describes a proposal for a low-cost modular architecture for satellite