Toward End-to-End, Full-Stack 6G Terahertz Networks

Recent evolutions in semiconductors have brought the terahertz band in the spotlight as an enabler for terabit-per-second communications in 6G networks. Most of the research so far, however, has focused on understanding the physics of terahertz devices, circuitry and propagation, and on studying physical layer solutions. However, integrating this technology in complex mobile networks requires a proper design of the full communication stack, to address link- and system-level challenges related to network setup, management, coordination, energy efficiency, and end-to-end connectivity. This paper provides an overview of the issues that need to be overcome to introduce the terahertz spectrum in mobile networks, from a MAC, network and transport layer perspective, with considerations on the performance of end-to-end data flows on terahertz connections.Comment: Published on IEEE Communications Magazine, THz Communications: A Catalyst for the Wireless Future, 7 pages, 6 figure

Broadband reflectionless metasheets: Frequency-selective transmission and perfect absorption

Energy of propagating electromagnetic waves can be fully absorbed in a thin lossy layer, but only in a narrow frequency band, as follows from the causality principle. On the other hand, it appears that there are no fundamental limitations on broadband matching of thin absorbing layers. However, known thin absorbers produce significant reflections outside of the resonant absorption band. In this paper we explore possibilities to realize a thin absorbing layer which produces no reflected waves in a very wide frequency range, while the transmission coefficient has a narrow peak of full absorption. Here we show, both theoretically and experimentally, that a wide-band-matched thin resonant absorber, invisible in reflection, can be realized if one and the same resonant mode of the absorbing array unit cells is utilized to create both electric and magnetic responses. We test this concept using chiral particles in each unit cells, arranged in a periodic planar racemic array, utilizing chirality coupling in each unit cell but compensating the field coupling at the macroscopic level. We prove that the concept and the proposed realization approach also can be used to create non-reflecting layers for full control of transmitted fields. Our results can have a broad range of potential applications over the entire electromagnetic spectrum including, for example, perfect ultra-compact wave filters and selective multi-frequency sensors.Comment: 9 pages, 10 figure

Holographic Communication using Intelligent Surfaces

Holographic communication is intended as an holistic way to manipulate with unprecedented flexibility the electromagnetic field generated or sensed by an antenna. This is of particular interest when using large antennas at high frequency (e.g., the millimeter wave or terahertz), whose operating condition may easily fall in the Fresnel propagation region (radiating near-field), where the classical plane wave propagation assumption is no longer valid. This paper analyzes the optimal communication involving large intelligent surfaces, realized for example with metamaterials as possible enabling technology for holographic communication. It is shown that traditional propagation models must be revised and that, when exploiting spherical wave propagation in the Fresnel region with large surfaces, new opportunities are opened, for example, in terms of the number of orthogonal communication channels.Comment: Submitted to IEEE Comm. Magazin

Error analysis of programmable metasurfaces for beam steering

© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Recent years have seen the emergence of programmable metasurfaces, where the user can modify the electromagnetic (EM) response of the device via software. Adding reconfigurability to the already powerful EM capabilities of metasurfaces opens the door to novel cyber-physical systems with exciting applications in domains such as holography, cloaking, or wireless communications. This paradigm shift, however, comes with a non-trivial increase of the complexity of the metasurfaces that will pose new reliability challenges stemming from the need to integrate tuning, control, and communication resources to implement the programmability. While metasurfaces will become prone to failures, little is known about their tolerance to errors. To bridge this gap, this paper examines the reliability problem in programmable metamaterials by proposing an error model and a general methodology for error analysis. To derive the error model, the causes and potential impact of faults are identified and discussed qualitatively. The methodology is presented and exemplified for beam steering, which constitutes a relevant case for programmable metasurfaces. Results show that performance degradation depends on the type of error and its spatial distribution and that, in beam steering, error rates over 20% can still be considered acceptable.This work has been supported by the European Commission under grant H2020-FETOPEN-736876 (VISORSURF) and by ICREA under the ICREA Academia programme. The person and base station icons in Figure 1 were created by Jens Tärningand Clea Doltz from the Noun Project.Peer ReviewedPostprint (author's final draft

Design of Reconfigurable Intelligent Surfaces for Wireless Communication: A Review

Existing literature reviews predominantly focus on the theoretical aspects of reconfigurable intelligent surfaces (RISs), such as algorithms and models, while neglecting a thorough examination of the associated hardware components. To bridge this gap, this research paper presents a comprehensive overview of the hardware structure of RISs. The paper provides a classification of RIS cell designs and prototype systems, offering insights into the diverse configurations and functionalities. Moreover, the study explores potential future directions for RIS development. Notably, a novel RIS prototype design is introduced, which integrates seamlessly with a communication system for performance evaluation through signal gain and image formation experiments. The results demonstrate the significant potential of RISs in enhancing communication quality within signal blind zones and facilitating effective radio wave imaging

Reprogrammable graphene-based metasurface mirror with adaptive focal point for THz imaging

Recent emergence of metasurfaces has enabled the development of ultra-thin flat optical components through different wavefront shaping techniques at various wavelengths. However, due to the non-adaptive nature of conventional metasurfaces, the focal point of the resulting optics needs to be fixed at the design stage, thus severely limiting its reconfigurability and applicability. In this paper, we aim to overcome such constraint by presenting a flat reflective component that can be reprogrammed to focus terahertz waves at a desired point in the near-field region. To this end, we first propose a graphene-based unit cell with phase reconfigurability, and then employ the coding metasurface approach to draw the phase profile required to set the focus on the target point. Our results show that the proposed component can operate close to the diffraction limit with high focusing range and low focusing error. We also demonstrate that, through appropriate automation, the reprogrammability of the metamirror could be leveraged to develop compact terahertz scanning and imaging systems, as well as novel reconfigurable components for terahertz wireless communications.Peer ReviewedPostprint (published version

Waveplates based on metasurfaces in the THz range

Los platos de onda basados en metasuperficies son componentes clave en electromagnetismo, ya que permiten un control total de la polarización de las ondas electromagnéticas con la ventaja de presentar estructuras más compactas que los platos de onda convencionales. Además, la aplicación del principio de Pancharatnam Berry (PB) a los platos de media onda (HWP) basados en metasuperficies, permite la manipulación de frentes de onda junto con la conversión de la polarización de las ondas incidentes circularmente polarizadas, simplemente girando los meta-átomos que componen la metasuperficie. Para lograr altos niveles de eficiencia de transmisión con platos de onda basados en metasuperficies, generalmente se requieren diseños multicapa. Esto implica estructuras voluminosas y complica el proceso de fabricación, restando importancia a la ventaja de utilizar metasuperficies. El propósito de esta tesis realizada en la Universidad Pública de Navarra y en L’École Polytechnique Fédérale de Lausanne, Suiza (EPFL) es ofrecer una ventaja tecnológica tanto para el control de polarización como para la manipulación del frente de onda y contribuir al desarrollo de dispositivos basados en metamasuperficies, incluyendo su fabricación y verificación experimental. Los resultados incluyen lo siguiente: Un plato de media onda operando en transmisión, ultradelgado y basado en una metasuperficie en zigzag de dos capas que opera en la parte baja del espectro del THz con un 90% de eficiencia de transmisión, que se demuestra numérica y experimentalmente. Se lleva a cabo un análisis detallado de la robustez del dispositivo con respecto a los desalineamientos de las capas mediante el diseño y la fabricación de dos dispositivos adicionales con el máximo desalineamiento entre capas en ambas direcciones transversales. Una metalente ultradelgada y compacta basada en el principio Pancharatnam Berry con solo dos capas alcanzando un 90% de eficiencia de transmisión, enfocando el frente de onda de una onda incidente polarizada circularmente y convirtiendo su polarización. La estructura es estudiada semi-analítica y numéricamente y medida experimentalmente, comprobándose un excelente comportamiento como HWP PB metalente a 87 GHz. Una aplicación de ingeniería de frentes de onda para la manipulación de los mismos se demuestra numéricamente en el rango de ondas milimétricas mediante la integración de la metalente en un sistema de antena-metalente, que se estudia semi-analíticamente y se corrobora experimentalmente. El sistema convierte la polarización de las ondas polarizadas circularmente, logrando un incremento de la directividad de antena de 17 dB a ⁓35 dB a 87 GHz con un AR inferior a 0.5 dB. Finalmente, se presentan dos configuraciones extra del sistema para trabajar entre los extremos del rango de frecuencia comprendido entre 75 GHz y 105 GHz, con directividades ⁓32 dB y AR < 3 dB.Transmissive waveplates based on metasurfaces are key components in electromagnetism, as they allow for a full control of the electromagnetic wave polarization with the advantage of presenting structures more compact than conventional waveplates. Moreover, applying the Pancharatnam Berry (PB) principle to half-wave plate (HWP) metasurfaces allows the manipulation of wavefronts along with the conversion of the handedness of circularly polarized incident waves by simply rotating the meta-atoms that compose the metasurface. For achieving high levels of transmission efficiency with transmissive waveplates based on metasurfaces, multiple layer designs are usually required. It implies bulky structures and complicates the fabrication process, downplaying the aim of the use of metasurfaces. The purpose of this thesis performed at the Public University of Navarre and at École Polytechnique Fédérale de Lausanne (EPFL) is to offer a technological advantage both for polarization controlling as wavefront manipulation and contribute to the development of metasurface-based devices, including their fabrication and experimental verification. The results include the following: An ultrathin transmissive half-wave plate based on a bi-layered zigzag metasurface operating at the lower-frequency edge of the THz spectrum with a 90% of transmission efficiency, which is numerically and experimentally demonstrated. A detailed analysis of the device robustness with respect to layer misalignments is carried out by designing and fabricating two additional devices with the maximum possible shift between layers along both transverse directions. A compact ultrathin metalens based on the Pancharatnam Berry principle with only two layers with a 90% of transmission efficiency, focusing the wavefront of a circularly polarized incident wave and converting its handedness. The structure is semi-analytically and numerically studied and experimentally measured, verifying an excellent behavior as HWP PB metalens at 87 GHz. A wavefront engineering application for wavefront manipulation is numerically demonstrated in the millimeter-wave range by the integration of the metalens in an antenna-metalens system, which is semi-analytically studied and experimentally corroborated. The system converts the handedness of circular polarized waves, achieving an increment of the antenna directivity from17 dB to ⁓35 dB at 87 GHz with an AR lesser than 0.5 dB. Finally, two extra system configurations are presented to work around the frequency range extremes comprised between 75 GHz and 105 GHz, with directivities ⁓32 dB and AR < 3 dB.Programa de Doctorado en Tecnologías de las Comunicaciones, Bioingeniería y de las Energías Renovables (RD 99/2011)Bioingeniaritzako eta Komunikazioen eta Energia Berriztagarrien Teknologietako Doktoretza Programa (ED 99/2011